Dynex checkball hydraulic pumps use two check valves in each piston pumping-chamber to direct flow from the inlet side of the pump to the pump outlet port. This pump design operates reliably with a wide range of fluids at high pressures. The positive-seating check valves provide better wear and higher volumetric efficiency, especially with low-viscosity, low-lubricity fluids.
Operating benefits include:
VERTICAL MOUNTING: Unlimited pump orientation provides circuit flexibility.
BI-DIRECTIONAL ROTATION: Constant flow direction regardless of drive shaft rotation.
PRESSURES TO 20,000 PSI: The design provides a high horsepower-to-weight ratio handling higher loads than other pumps.
WIDE RANGE OF FLUIDS: The check valves provide better wear and higher volumetric efficiency with low-lubricity/low-viscosity fluids.
NO LUBRICATING OIL REQUIRED: Only the pumped fluid is required for internal lubrication, eliminating a secondary lubrication circuit and reducing maintenance.
CONTAMINATION TOLERANT: A large flow path into pistons, and output through the outlet check valves, allows contamination to be flushed through the pump.
RESISTANT TO CAVITATION: The outlet checks do not unseat until pumped fluid reaches load pressure, providing reduced decompression shock and resistance to cavitation damage.
SPLIT-FLOW: Multiple outlet pumps simplify multiple-function circuits using only one pump, and provide greater output-flow accuracy than flow dividers for synchronized movement.
To learn more, visit https://www.dynexhydraulics.com
Post time: Oct-19-2017