13 Years Manufacturer TU-1D01-71 thermal wax actuator for automobile thermostat for Argentina Factories
Short Description:
Product Detail
Product Tags
13 Years Manufacturer TU-1D01-71 thermal wax actuator for automobile thermostat for Argentina Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for 13 Years Manufacturer TU-1D01-71 thermal wax actuator for automobile thermostat for Argentina Factories, The product will supply to all over the world, such as: Marseille , Iran , Florida , Our factory insists on the principle of "Quality First, Sustainable Development", and takes "Honest Business, Mutual Benefits" as our developable goal. All members sincerely thanks for all old and new customers' support. We will keep working hard and offering you the highest-quality products and service.Thanks.
Plagued with your Ford EATC blowing air out of the defrost no matter what mode you set it too? This tutorial is for you. The Demo car is a 2008 Mercury Grand Marquis LS with the Ford EATC.
This is applicable to several Ford/Lincoln/Mercury Models through the years of 1992 – 1995 (Soft Button Units) and 1996 – 2011 (Hard Button Units).
Some Cars I know this procedure is compatible with (Note: Some Ford EATC Units have a metal support bracket, in which may require alternative methods of repair):
1994-2011 Mercury Grand Marquis
1994-2011 Ford Crown Victoria
1992-1997 Lincoln Town Car
1997-2002 Ford Expedition
2000-2005 Ford Excursion
1997-2002 Lincoln Navigator
1997-2002 F-150
1998 F-250 (If Equipped with Ford Automatic Climate Control)
1999-2007 F-250
1999-2007 F-350
1992-1996 Ford Taurus
1992-1996 Mercury Sable
1995-2002 Lincoln Continental
An In-Depth Tutorial of the Removal of the Ford EATC Unit from a Mercury Grand Marquis, Dis-assembly of the Ford EATC Unit, replacement of the O-Rings within the vacuum solenoids, Reassembly of Ford EATC Unit, re-install back into the Mercury Grand Marquis and Test Run. Hope this helps all of you out there that have been plagued with this problem with the Ford EATC.
This should only take an hour or two to get a Ford EATC back to working condition.
Parts and Tools needed:
- Ratchet with 7 mm or 9/32 Socket (Removal of EATC)
- Small Flat bladed screwdriver (Removal of Solenoid Chambers)
- Needle nose Pliers (To bend tabs up on EATC solenoids)
- Screwdriver with interchangeable bits (a Torx T-15 and Phillips)
Parts:
- 5 or More O-Rings (O’Reilly Auto: NAT-007 or McMaster Carr: 9396K12 007) O-Ring Size: ID 5/32″ OD: 9/32 1/16″ Thickness
- Die Electric Grease (One Packet is sufficient)
This DIY will show you how to check your cam follower, as well as replace your fuel pump and convert your FSI Fuel pump mounting from bolts to studs.
Disclaimer: Please note all DIY are intended for basic information. Deutsche Auto Parts is not liable for any damage incurred during any attempt to follow the information shown in the video above.
The 2.0T FSI engine can require some attention from the owner. Checking the cam follower for wear or damage is a must. This is often checked every 10K miles by many attentive VW and Audi enthusiast. Regular inspection of the FSI cam follower can allow you to catch a problem long before it becomes extremely costly.
Parts from this video
Cam Follower
https://deutscheautoparts.com/fsi-cam-follower-06d109309c.html
2.0T FSI High Pressure Fuel Pump
https://deutscheautoparts.com/fsi-hpfp-fuel-pump-06f127025m.html
2.0T FSI Fuel Pump Stud Conversion
https://www.deutscheautoparts.com/View/06F-198-025-K/0/526951
Check our site for great prices on VW and Audi Parts
https://shopdap.com/
This video was filmed at our facility
Deutsche Auto Parts
18525 Statesville Rd
Unit D4
Cornelius NC 28031
We are your number one place for VW and Audi Performance Software (ECU Tuning) as well as Parts and Accessories in the Charlotte area.