15 Years Factory wholesale TU-026D thermostatic cartridge wax sensor for sanitary ware for Porto Importers
Short Description:
Product Detail
Product Tags
15 Years Factory wholesale TU-026D thermostatic cartridge wax sensor for sanitary ware for Porto Importers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Normally customer-oriented, and it's our ultimate concentrate on for being not only one of the most dependable, trustable and honest supplier, but also the partner for our shoppers for 15 Years Factory wholesale TU-026D thermostatic cartridge wax sensor for sanitary ware for Porto Importers, The product will supply to all over the world, such as: United States , Congo , Philippines , We can meet the various needs of customers at home and abroad. We welcome new and old customers to come to consult & negotiate with us. Your satisfaction is our motivation! Allow us to work together to write a brilliant new chapter!
Once the UDS reaches the pre-set temperature the blower turns off. The blower turns back on when temperature drops by a few degrees, then turns off once the temp goes up again just like a thermostat although much more sensitive. This cylic on/off switching of the blower serves to regulate the temperature inside the drum to within +/-3 deg-F for hours on end, as long as there’s enough charcoal in the fire basket. A temperature probe goes through the side of the drum and serves to sample the actual temperature inside drum.
An alarm sounds off once the temperature drops by about 20 deg-F from the set point and this prompts me to add more charcoal. The set point for the alarm automatically follows the temp setting on the knob; there’s no knob for the alarm set point. Now I can sleep without worrying about my cooking. 
The analog meter serves as a rough (un-calibrated) indication of the UDS temperature. I put it there cuz I had one lying around. Not really happy with it cuz I get more resolution from my digital thermometer.
Analog electronics reside inside the small black box. The temperature can be set anywhere from 180 deg-F to 300 deg-F by turning a knob. LED indicators for power and blower on. Alarm enable/disable switch. The black box is magnetically-mounted to the side of the drum for quick & easy mounting & de-mounting (no screws). Power is supplied by either a wallwart or a 12v battery and the unit is reverse-polarity protected, less than 2 watts power consumption.
after I installed this controller I never have thick dark smoke coming out of my UDS anymore and the temperature is REALLY constant now. No more guesswork and tweaking of the air vent holes which take a long time to figure out and varies with ambient temperature.
If you would like to order please see my ad here: https://www.sulit.com.ph/index.php/view+classifieds/id/16394529/Temperature+Controller+for+Charcoal+Fired+Ovens+and+Smokers?event=Search+Ranking,Position,1-1,1
This video shows how to test a auto choke commonly found on many mopeds and atvs. This demonstration was filmed in the lab at Western Iowa Tech Community College Motorcycle and Powersports Technology Program. If you would like more info on the program feel free to contact the instructor @ 712-274-8733 ext 1204 or email shane.conley@witcc.edu .
