15 Years Manufacturer TU-1H02 thermal wax actuator for thermostatic radiator valve to kazakhstan Factories
Short Description:
Product Detail
Product Tags
15 Years Manufacturer TU-1H02 thermal wax actuator for thermostatic radiator valve to kazakhstan Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of 15 Years Manufacturer TU-1H02 thermal wax actuator for thermostatic radiator valve to kazakhstan Factories, The product will supply to all over the world, such as: Jordan , Detroit , Portland , We are proud to supply our products to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
SolarPood – 12V Thermoelectric Cooler / Heater
http://solarpood.eu/shop/detail/73/12v_thermoelectric_cooler_/_heater_12706
Get ice cold in minutes or heat to boiling by simply reversing device. Used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. Simple solid-state design consisting primarily of semiconductor material sandwiched between ceramic plates.
NOTE: You should never use this device without sufficient thermal cooling (heatsink, fan etc). Operating the it without additional cooling for more than a few seconds will damage the device. Hobby Components cannot replace devices that have been damaged in this way.
More advice when buying a second hand turbo
Exhaust Gas Recirculation valve – What’s inside?
Just a quick video explaining some important facts about the EGR valve and control solenoids and what to be aware of if buying a used turbo for the XUD turbo-diesel engine. (1.9 and 2.1 engines as fitted to Citroen Xantia, XM, Peugeot 206, 306, 405, 406 and 605). The tips and facts could also be applied to any make of diesel/turbo-diesel that uses conventional mechanical fuel injection. Exhaust gas recirculation is fitted to reduce oxides of nitrogen but more importantly to lower exhaust gas temperatures thus reducing thermal load on the turbo unit. Generally turbos on diesel engines are less heat tolerant than those fitted to petrol engines. One of the side effects of deliberately blanking off or a stuck (in closed position) EGR valve is overheating of the turbo shaft seals which eventually cook which over time allows engine oil to be drawn in and burned along with the fuel. Another symptom is intercoolers contaminated with oil. A light misting is ok but heavy contamination indicates either oil is being forced into the induction system via worn compressor seals or the crankcase is being pressurised due to blocked breathers, malfunctioning PCV unit, or worn bores or rings, worn valve seats – in short a well worn engine.
The XU diesel is generally long lived – IF regularly serviced – but it is NOT ‘bomb proof.’ It doesn’t tolerate lack of servicing or extended oil change intervals. These engines need 6,000 mile oil & filter changes using good quality oil.
Also carry out two basic checks which apply to any turbo whether petrol or diesel fitment;
1. Spin compressor and ensure turbine also spins smoothly. It’s not unknown for shafts to snap due to sudden oil starvation, thermal overload and seizure or foreign object ingestion. Take a torch (flashlight) with you so you can check it properly.
2. Compressor should turn smoothly with no roughness, binding, or tell-tale signs of blade contact with the housing. Also make sure the compressor blades are intact with no chunks missing.
