2017 New Style TU-1A93 thermal wax actuator for thermostatic automatic water drain valve for Luxembourg Manufacturers
Short Description:
Product Detail
Product Tags
2017 New Style TU-1A93 thermal wax actuator for thermostatic automatic water drain valve for Luxembourg Manufacturers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Bear "Customer first, High quality first" in mind, we perform closely with our consumers and provide them with efficient and experienced services for 2017 New Style TU-1A93 thermal wax actuator for thermostatic automatic water drain valve for Luxembourg Manufacturers, The product will supply to all over the world, such as: Singapore , Florida , South Korea , With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.
I had the “Service 4WD System” message appear on my 2005 Jeep Grand Cherokee Limited (5.7L Hemi with Quadra-Drive II). I checked the wiring from the Final Drive Controller (under the rear seat cushion) and verified the front axle actuator wiring and solenoid were OK (14 ohms across the solenoid wiring) but the rear axle actuator solenoid wiring was open circuit. I checked the resistance at the axle connector and it was also open circuit so the rear axle cover would have to come off. Replacing the actuator solenoid and wiring fixed the problem!
Here are the Jeep Part Numbers:
Parts – Front Axle
52114327AC HARNESS, Electronic Front Axle,With [DSG]
52114003AF ACTUATOR, Axle Locker, With [DSG]
Parts – Rear Axle
52114328AC HARNESS, Electronic Rear Axle, [DSF] Only
52114003AF ACTUATOR, Axle Locker, [DSF] Only
These should be available through any Chrysler dealer (my order took about a week to come in in November 2011).
