Factory Cheap Thermostatic Wax Linearity Series Supply to Italy
Short Description:
Product Detail
Product Tags
Factory Cheap Thermostatic Wax Linearity Series Supply to Italy Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility sAcid and Alkali |
Mechanical Impurity |
||
|
B-5-1 |
Liquid |
-20/-5 |
≥7 |
Non. |
Non. |
|
B0-1 |
Liquid |
-15/0 |
≥7 |
Non. |
Non. |
|
B5-1 |
Liquid |
-10/5 |
≥7 |
Non. |
Non. |
|
B15-1 |
Liquid |
0/15 |
≥7 |
Non. |
Non. |
|
B20-1 |
Semisolid |
5/20 |
≥7 |
Non. |
Non. |
|
B25-1 |
Semisolid |
10/25 |
≥7 |
Non. |
Non. |
|
B30-1 |
Semisolid |
15/30 |
≥7 |
Non. |
Non. |
|
B35-1 |
Semisolid |
20/35 |
≥7 |
Non. |
Non. |
|
B40-1 |
Powder, Slice , Column |
25/40 |
≥7 |
Non. |
Non. |
|
B45-1 |
Powder, Slice , Column |
30/45 |
≥7 |
Non. |
Non. |
|
B50-1 |
Powder, Slice , Column |
35/50 |
≥7 |
Non. |
Non. |
|
B55-1 |
Powder, Slice , Column |
40/55 |
≥7 |
Non. |
Non. |
|
B60-1 |
Powder, Slice , Column |
45/60 |
≥7 |
Non. |
Non. |
|
B65-1 |
Powder, Slice , Column |
50/65 |
≥7 |
Non. |
Non. |
|
B70-1 |
Powder, Slice , Column |
55/70 |
≥7 |
Non. |
Non. |
|
B75-1 |
Powder, Slice , Column |
60/75 |
≥7 |
Non. |
Non. |
|
B80-1 |
Powder, Slice , Column |
65/80 |
≥7 |
Non. |
Non. |
|
B85-1 |
Powder, Slice , Column |
70/85 |
≥7 |
Non. |
Non. |
|
B90-1 |
Powder, Slice , Column |
75/90 |
≥7 |
Non. |
Non. |
|
B95-1 |
Powder, Slice , Column |
80/95 |
≥7 |
Non. |
Non. |
Product detail pictures:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" plus the theory of "quality the basic, have faith in the main and management the advanced" for Factory Cheap Thermostatic Wax Linearity Series Supply to Italy, The product will supply to all over the world, such as: Mecca , Johor , New Delhi , The working experience in the field has helped us forged a strong relations with customers and partners both in domestic and international market. For years, our products and solutions have been exported to more than 15 countries in the world and have been widely used by customers.
DEEDI – More Profit Per Drop Team presents “Inspecting a flooded diesel pump (the radiator and cooling system)” featuring Pat Daley (Daley Water Services).
These videos detail the inspection process for a flooded diesel pump, including the fuel system, the radiator and cooling system, the air intake and exhaust fan, the electrical system, and the pump alignment and discharge.
A people counter is a device used to measure the number and direction of people traversing a certain passage or entrance per unit time. The resolution of the measurement is entirely dependent on the sophistication of the technology employed. The device is often used at the entrance of a building so that the total number of visitors can be recorded. Many different technologies are used in people counter devices, such as infrared beams, computer vision, thermal imaging and pressure-sensitive mats
Infrared beams
The simplest form of counter is a single, horizontal infrared beam across an entrance which is typically linked to a small LCD display unit at the side of the doorway or can also be linked to a PC or send data via wireless links and GPRS. Such a beam counts a ‘tick’ when the beam is broken, therefore it is normal to divide the ‘ticks’ by two to get visitor numbers. Dual beam units are also available from some suppliers and can provide low cost directional flow ‘in’ and ‘out’ data. Accuracy depends highly on the width of the entrance monitored and the volume of traffic.
Horizontal Beam Counters usually require a receiver or a reflector mounted opposite the unit with a typical range up to 6 metres (20 ft), although range finding beam counters which do not require a reflector or receiver usually have a shorter range of around 2.5 metres (8 ft 2 in).
Vertical beams are somewhat more accurate than horizontal, with accuracies of over 90% possible if the beams are very carefully placed. Typically they do not give ‘in and out’ information, although some directional beams do exist.
Computer vision
Computer vision systems typically use either a closed-circuit television camera or IP camera to feed a signal into a computer or embedded device. Some computer vision systems have been embedded directly into standard IP network cameras. This allows for distributed, cost efficient and highly scalable systems where all image processing is done on the camera using the standard built in CPU. This also dramatically reduces band width requirements as only the counting data has to be sent over the Ethernet.
Accuracy varies between systems and installations as background information needs to be digitally removed from the scene in order to recognize, track and count people. This means that CCTV based counters can be vulnerable to light level changes and shadows, which can lead to inaccurate counting. Lately, robust and adaptive algorithms has been developed that can compensate for this behavior and excellent counting accuracy can today be obtained for both outdoor and indoor counting using computer vision
Main concept behind this project is to measure and display the number of persons entering in any room like seminar hall, conference room. LCD or seven segment display display placed outside the room displays this value. And when number of persons inside the room are zero, power supply inside the room can be cut using a relay interface. Second part of project serves the functionality of a door-latch opening using a password entered through keypad. As well as sending this data to a computer through serial port. This module also turn on buzzer if 3 wrong passwords are entered consequently. User can change this password anytime he/she wish using a keypad.
