factory customized TU-1C09 thermal wax actuator for thermostatic automatic water drain valve for US Manufacturers
Short Description:
Product Detail
Product Tags
factory customized TU-1C09 thermal wax actuator for thermostatic automatic water drain valve for US Manufacturers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
High quality Very first,and Consumer Supreme is our guideline to offer the most beneficial service to our consumers.At present, we're attempting our greatest to be among the top exporters in our area to fulfill buyers far more need to have for factory customized TU-1C09 thermal wax actuator for thermostatic automatic water drain valve for US Manufacturers, The product will supply to all over the world, such as: Mongolia , Montreal , Japan , Providing Quality Products, Excellent Service, Competitive Prices and Prompt Delivery. Our products are selling well both in domestic and foreign markets. Our company is trying to be one important suppliers in China.
Clutch-Less Variable Displacement AC Compressor.
LINKS:
https://www.autodiagnosticsandpublishing.com/TransTS.html
https://www.autodiagnosticsandpublishing.com/CBT_Auto_Traning.htm
Due to the ever increasing fight for high efficiency and fuel economy, automobile manufacturers, especially in Europe, have developed the clutch-less AC compressor. Sanden being one of those compressor manufacturers, has develop the PXE series variable displacement AC compressor, which we’ll use as a study example for this technology. On standard compressors, the belt turns a pulley with an electric clutch. When you turn on the AC, the clutch engages, and the piston starts pumping to compress the refrigerant. There are two problems with this traditional approach. One, a compressor needs a fair amount of power. In cars with small engines, the engagement of the clutch to activate the compressor puts a big load on the engine, especially if it is idling. Two, the compressor will produce low flow or not enough when the engine is idling, and high flow when the engine is at high RPM and possibly too much refrigerant flow.
In 1985, Delphi then Harrison, developed the V5 variable displacement compressor. In early 2003…
Get the whole story right now in this video. Enjoy…
We show how to purify aluminum nitrate and strontium nitrate by recrystallization. This is important because those two substances must be extremely pure for our upcoming video on making glow in the dark powder.
First make aluminum nitrate from our previous video: https://www.youtube.com/watch?v=u4Ha1SJrazY
Dissolve the dry aluminum nitrate in water and filter off any insoluble materials. We could not filter it off before it dried in the previous video because the particles at that stage are much too small. It needs crystallize once to aggregate into particles large that can be filtered.
After filtering, dry off the aluminum nitrate. The desiccator bag might be useful here: https://www.youtube.com/watch?v=XJFfS_YbbYI
After drying, carefully weigh out the crystals. Then take that mass and add in 20% mass of water. So if you have 50g like me, you add 10g of water (or 10mL since density is 1g/mL).
It won’t all dissolve, so carefully heat the mixture until it dissolves. Then cover it and let it cool down. Eventually it’ll crystallize out purer crystals.
After the mixture cools to room temperature, and left for a few hours. The liquid is poured off and discarded, it has the impurities and is not needed.
The crystals are again weighed and once again they are recrystallized with 20% water.
Once this is done. Dry the final product. I started with 50g and ended up with 17g. But now it’s very pure. Better than 99%
Strontium nitrate also needs to be purified. But it’s solubility doesn’t change that much with temperature so we’ll have to purify by slow evaporation recrystallization rather than thermal cycle recrystallization.
First, make strontium nitrate like our previous video: https://www.youtube.com/watch?v=_rd8b6wNnKA
Once again, dissolve it in water and filter it. Then let it crystallize. But before it dries completely, let the liquid reduce to about 20% of it’s saturated volume. So I started with a saturated solution of 10mL of strontium nitrate, i then waited until it evaporated down to 2mL of fluid. The crystals are not included in this assessment. Then discard the liquid. Repeat the recrystallization process.
Once again, use the desiccator bag to obtain extremely dry chemicals.
We are now ready to produce glow-in-the-dark powder.
