Factory directly sale TU-1D01-71 thermal wax actuator for automobile thermostat for Hungary Factories
Short Description:
Product Detail
Product Tags
Factory directly sale TU-1D01-71 thermal wax actuator for automobile thermostat for Hungary Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We consistently carry out our spirit of ''Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for Factory directly sale TU-1D01-71 thermal wax actuator for automobile thermostat for Hungary Factories, The product will supply to all over the world, such as: Luxembourg , Zimbabwe , Orlando , With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
Two underfloor circuits coming from the manifold was not heating up properly. It was found that the flow rates were not set properly. The floe rates were adjusted and the underfloor heating system was balanced.
The power window broke on our 1999 Sienna minivan. Here is how I debugged and fixed it. Had to remove the door panel, figure out whether the problem was the switch or the motor, then remove and replace the entire regulator assembly.
I believe that Siennas from 1998 to 2003 all have the same door, but no guarantees.
