Factory directly supply Thermostatic Wax Linearity Series Supply to Burundi
Short Description:
Product Detail
Product Tags
Factory directly supply Thermostatic Wax Linearity Series Supply to Burundi Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility sAcid and Alkali |
Mechanical Impurity |
||
|
B-5-1 |
Liquid |
-20/-5 |
≥7 |
Non. |
Non. |
|
B0-1 |
Liquid |
-15/0 |
≥7 |
Non. |
Non. |
|
B5-1 |
Liquid |
-10/5 |
≥7 |
Non. |
Non. |
|
B15-1 |
Liquid |
0/15 |
≥7 |
Non. |
Non. |
|
B20-1 |
Semisolid |
5/20 |
≥7 |
Non. |
Non. |
|
B25-1 |
Semisolid |
10/25 |
≥7 |
Non. |
Non. |
|
B30-1 |
Semisolid |
15/30 |
≥7 |
Non. |
Non. |
|
B35-1 |
Semisolid |
20/35 |
≥7 |
Non. |
Non. |
|
B40-1 |
Powder, Slice , Column |
25/40 |
≥7 |
Non. |
Non. |
|
B45-1 |
Powder, Slice , Column |
30/45 |
≥7 |
Non. |
Non. |
|
B50-1 |
Powder, Slice , Column |
35/50 |
≥7 |
Non. |
Non. |
|
B55-1 |
Powder, Slice , Column |
40/55 |
≥7 |
Non. |
Non. |
|
B60-1 |
Powder, Slice , Column |
45/60 |
≥7 |
Non. |
Non. |
|
B65-1 |
Powder, Slice , Column |
50/65 |
≥7 |
Non. |
Non. |
|
B70-1 |
Powder, Slice , Column |
55/70 |
≥7 |
Non. |
Non. |
|
B75-1 |
Powder, Slice , Column |
60/75 |
≥7 |
Non. |
Non. |
|
B80-1 |
Powder, Slice , Column |
65/80 |
≥7 |
Non. |
Non. |
|
B85-1 |
Powder, Slice , Column |
70/85 |
≥7 |
Non. |
Non. |
|
B90-1 |
Powder, Slice , Column |
75/90 |
≥7 |
Non. |
Non. |
|
B95-1 |
Powder, Slice , Column |
80/95 |
≥7 |
Non. |
Non. |
Product detail pictures:
The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for Factory directly supply Thermostatic Wax Linearity Series Supply to Burundi, The product will supply to all over the world, such as: Muscat , Mecca , Georgia , we're now looking forward to even greater cooperation with overseas customers based on mutual benefits. We are going to work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
How to make DIY high voltage capacitors. I start by showing a few different high voltage capacitors I’ve made over the years followed by an explanation of how denser electric field causes breakdown of the capacitor dielectric/insulator. I then show what the voltage rating on commercial capacitors means. I next show how to find breakdown voltage, also known at dielectric strength, online and use it in calculations for how thick your dielectric should be. That’s followed by a breakdown voltage test with a homemade high voltage power supply, an analog volt meter and an ammeter. I then show how the shape of capacitor plates influences breakdown voltage, as well as the effect thin plates has on ionizing air. That leads to using corona dope, resin or wax to insulate the capacitor plates. In the final breakdown voltage demonstrations I show the use of current limiting resistors and lastly how standard breakdown voltage tests are done.
Also watch “How to Make Capacitors – Low Voltage Homemade/DIY Capacitors” video,
https://youtu.be/GveI9gXIsHw
To make higher capacitance capacitors, for around 62 microfarads see my “How to Make an Electrolytic Capacitor” video here:
https://youtu.be/ml2TdQ2_2mk
And for even higher capacitance, 580 microfarads, see my “How to Make a High Capacitance Electrolytic Capacitor” video here:
https://youtu.be/lmVVdV8wuB0
The webpage with details on how I make high voltage connectors,
https://rimstar.org/equip/hvwiring.htm
Details of how I made my homemade high voltage power supply for up to 30kV are here:
https://rimstar.org/equip/30kv_pwr_supply.htm
Here’s a link to the Super Corona Dope I use in this video:
https://www.mgchemicals.com/products/protective-coatings/insulating/super-corona-dope-4226/
Other high voltage sources…
For a Wimshurst machine see:
https://youtu.be/puC6-UaT9Fk (how to make one)
https://rimstar.org/equip/wimshurst_27cm.htm (a commercially bought one)
For a Van de Graaff generator:
https://youtu.be/fsT69XnjxgU (how to make one)
https://rimstar.org/equip/build_make_van_de_graaff.htm (more how to make)
For a high power high voltage one, up to 75kV:
https://rimstar.org/equip/hvg10.htm
3D capacitor animation done using Blender 2.63.
To follow me on Twitter:
https://twitter.com/#!/RimStarz
https://rimstar.org
This shows a simple step by step guide to servicing the cartridge used in the 1500 series. The steps will show you how to remove the cartridge from the valve body, break the cartridge down and replace the seals. This particular video shows the 1500-2 cartridge, but the principles are generic across the range. In order to service the cartridge you will need a SK1500-1 seal kit, which can be ordered from www.bristan.com
