Factory For Thermostatic Wax Linearity Series to Malaysia Factories
Short Description:
Product Detail
Product Tags
Factory For Thermostatic Wax Linearity Series to Malaysia Factories Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility sAcid and Alkali |
Mechanical Impurity |
||
|
B-5-1 |
Liquid |
-20/-5 |
≥7 |
Non. |
Non. |
|
B0-1 |
Liquid |
-15/0 |
≥7 |
Non. |
Non. |
|
B5-1 |
Liquid |
-10/5 |
≥7 |
Non. |
Non. |
|
B15-1 |
Liquid |
0/15 |
≥7 |
Non. |
Non. |
|
B20-1 |
Semisolid |
5/20 |
≥7 |
Non. |
Non. |
|
B25-1 |
Semisolid |
10/25 |
≥7 |
Non. |
Non. |
|
B30-1 |
Semisolid |
15/30 |
≥7 |
Non. |
Non. |
|
B35-1 |
Semisolid |
20/35 |
≥7 |
Non. |
Non. |
|
B40-1 |
Powder, Slice , Column |
25/40 |
≥7 |
Non. |
Non. |
|
B45-1 |
Powder, Slice , Column |
30/45 |
≥7 |
Non. |
Non. |
|
B50-1 |
Powder, Slice , Column |
35/50 |
≥7 |
Non. |
Non. |
|
B55-1 |
Powder, Slice , Column |
40/55 |
≥7 |
Non. |
Non. |
|
B60-1 |
Powder, Slice , Column |
45/60 |
≥7 |
Non. |
Non. |
|
B65-1 |
Powder, Slice , Column |
50/65 |
≥7 |
Non. |
Non. |
|
B70-1 |
Powder, Slice , Column |
55/70 |
≥7 |
Non. |
Non. |
|
B75-1 |
Powder, Slice , Column |
60/75 |
≥7 |
Non. |
Non. |
|
B80-1 |
Powder, Slice , Column |
65/80 |
≥7 |
Non. |
Non. |
|
B85-1 |
Powder, Slice , Column |
70/85 |
≥7 |
Non. |
Non. |
|
B90-1 |
Powder, Slice , Column |
75/90 |
≥7 |
Non. |
Non. |
|
B95-1 |
Powder, Slice , Column |
80/95 |
≥7 |
Non. |
Non. |
Product detail pictures:
continue on to further improve, to make sure product top quality in line with market and consumer standard requirements. Our firm has a excellent assurance program have already been established for Factory For Thermostatic Wax Linearity Series to Malaysia Factories, The product will supply to all over the world, such as: Gambia , Malawi , Greek , Our company is working by the operation principle of "integrity-based, cooperation created, people oriented, win-win cooperation". We hope we can have a friendly relationship with businessman from all over the world.
https://se.varme.danfoss.com/
Planera din installation och se till att du använder Danfoss Link™ CC (centralenhet) i relevanta tillämpningar
Lägg till kontrollbox för vattenburen golvvärme
Automatic Aerated Concrete Block line(Dongyue Brand),autoclaved concrete Concrete block machine, cellular concrete block machine, porous concrete machinery, Ytong AAC block machine(Austria and Slovenia), Hebel AAC block machine(Australia), Aircrete and Thermalite AAC block machine(UK), and BCA AAC block machine (Romania)., AAC block machine, light weight block machine, AAC block machine projects, more information,kindly feel free to let me know.
Contact:Jerry Gao
Email:buildingmachines@gmail.com
MSN:aacblockmachine@hotmail.com
Phone:0086-15054985958
Automatic Aerated Concrete Block line(Dongyue Brand) Introduction:
Automatic Aerated Concrete Block line(Dongyue Brand),Aerated concrete brick(light weight block) is the light and porous building material, it has light weight keep temperature fire resistant and other advantages, it can be made into many kinds of blocks, the length:600mm, height:300mm,250mm,200mm,150mm, width:300mm,250mm,200mm 150mm,125mm,100mm,they could be used for industry building and common building, they are more and more popular in the world, in the future, they will replace the clay bricks completely.
2 Aerated concrete common conception.
Common concrete block density is usually 1600-2400 kg/m3,but aerated concrete are 600kg/m3,
650kg/m3,700kg/m3.it has no the big grain, mainly use silicon materials(for example: coal ash, sand, stone dust and others). Through making the material small for example: sand, they can be used directly if has enough degree of small(for example, coal ash, mixing calcium material,lime,cement water to a special slop, then add the aluminum powder and the addictive, make the aluminum powder and the special slop have a chemical reflect, then produce hydrogen to make the concrete slop to expanding or swell, expanding, next put them into the curing room to curing, then cutting, steaming, last, there will become the light block, the porous rate is 70%-80%.
3 advantages
Light weight
Aerated concrete density is usually 600-800kg/m3(according to the market in production), same as 1/3 of clay brick and 1/5 of common concrete, so use the light brick can reduce the weight of the building, and also reduce the beam of roof and pillar press, also you can see, it can save the material and costs,
Keep temperature.
It has many porous, the delivery hearting coefficient is 0.9-0.22W/MK, so it is the best materials in the world now, also many kinds of raw materials, have lowest waster materials, coal ash, sand waste mine materials stone dust and other silicon materials.
We are the top leader in China on manufacturing the autoclaved aerated concrete line(aac)with 65% markets share, we have exported our lines to different countries ——-Vietnam, India, Russia, Thailand, Ukraine, Middle East and so on.
We can supply our customer for designing, production, installation, commissioning, training and good after-sales service.
Capacity: from 50000 cubic meter to 300,000 cubic meter per year.
Equipments: stocking raw materials, mixing, molding, forming, cutting, evaporating and curing, crane cramp, transporting etc.
1 product weight is according to 600kg/m3 to control,
2 annual biggest capacity 300,000 m3
3 set raw material proportion: cement 6.5%, raw lime 23%, flyash 68%,gypsum 3%,aluminum powder 350g/m3
4 water and material rate 0.631
5 one mould capacity 2.88m3
6 casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes.
7 casting slurry temperature: 38-42 degree.
8 body quiet stop, time is 2.5-2.5 hours, temperature 50-60 degree, after quiet stop body strength is 0.15-0.18 Mpa
9 steam curing cycle time, come in and our autoclave about 0.5 hour,steam curing cycle time about is 7 hours/1.2 Mpa, total 7.5 hours.
10
Cement lime flyash style aerated block raw material proportion.
name unit Cement lime fly ash
flash % 65-70
cement % 6-15
lime % 18-25
gypsum % 3-5
Aluminum powder paste(600kg/m3) 1/10000 8
Water & material rate 0.60-0.65
Casting system OC 36-40
Aluminum mixing time S 30-40
11. cement lime sand style aerate block raw material proportion
Name Unit Cement Lime Sand
Sand % 55-65
Cement % 10-20
Lime % 20-30
Gypsum % 2-3
Aluminum powder paste(600kg/m3) 1/10000 8
Water & material rate 0.65-0.75
Casting system OC 35-38
Aluminum mixing time S 30-40
Reference:cement is 42.5 Portland or 42.5 common cement.
Aluminum powder calculate to use according to 600kg/m3
Remark: the accurate batching rate is adjustable according to the raw material locally.
