Factory For TU-1D05 thermal wax actuator for industrial thermostatic water regulations mixing valve for Brisbane Manufacturer

Factory For
 TU-1D05 thermal wax actuator for industrial thermostatic water regulations mixing valve for Brisbane Manufacturer

Short Description:

Product Detail

Product Tags

We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for Radiator Valve Actuator , Automation Control Valve , Air Conditioner And Compressor , We sincerely hope to establish some satisfactory relationships with you in the near future. We will keep you informed of our progress and look forward to building steady business relations with you.
Factory For TU-1D05 thermal wax actuator for industrial thermostatic water regulations mixing valve for Brisbane Manufacturer Detail:

1. Operation Principle

The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.

2. Characteristic

(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.

(2)Temperature control is reliable and nicety

(3)No shaking and tranquilization in working condition.

(4)The element doesn’t need special maintenance.

(5)Working life is long.

3.Main Technical Parameters

(1)Handspike’s height may be confirmed by drawing and technical parameters

(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.

(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.

(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.

(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.


Product detail pictures:

Factory For
 TU-1D05 thermal wax actuator for industrial thermostatic water regulations mixing valve for Brisbane Manufacturer detail pictures


We support our purchasers with ideal high-quality merchandise and significant level company. Becoming the specialist manufacturer in this sector, we now have received loaded practical encounter in producing and managing for Factory For TU-1D05 thermal wax actuator for industrial thermostatic water regulations mixing valve for Brisbane Manufacturer, The product will supply to all over the world, such as: Oslo , South Africa , Azerbaijan , They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to for you of fantastic good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We are confident that we are going to have a bright prospect and to be distributed all over the world in the years to come.



  • “For information please visit https://owners.nissanusa.com/nowners/. You will find quick reference guides and other useful information about your warranty, Bluetooth® system, and much more!

    If your vehicle is not equipped with the Navigation System, please see your Owner’s Manual for information on the automatic climate controls for your vehicle.

    This is the panel you’ll use to set the climate control system. Press THIS button to turn the system ON. The indicator light will illuminate and the system will automatically regulate and maintain fan speed, air flow and temperature in the cabin. Use THESE buttons to set the desired temperature.

    Using the climate control system to heat the cabin when outside temperature is below 32° uses more electricity and affects vehicle range more than when using the heater at a temperature above 32°.

    You can override the settings of the automatic climate control system as needed. For example, you can use THESE buttons to adjust the fan speed up or down.
    Press THIS button to change the air flow mode. Your choice is shown on the display. The airflow can be set to the:
    ● center and side vents,
    ● center and side vents, and foot outlets,
    ● mainly from foot outlets, and
    ● from the defroster and foot outlets.

    Press THIS button to recirculate air inside your vehicle. The indicator light will illuminate. This increases A/C efficiency and helps block outside odors from entering the cabin. Press again to draw in fresh outside air. Please be aware that when a DEFROSTER air flow mode is selected, the air recirculation feature will not activate. Allowing outside air to enter the vehicle further improves defogging performance.

    Press and hold the intake air control button to set the intake air control to automatic. The indicator light will blink twice.

    Press THIS button to manually turn the air conditioner ON or OFF. In hot or humid conditions, a visible mist may be seen coming from the vents. This does not indicate a malfunction.

    Press the HEAT button to manually turn the heater on or off. The indicator light illuminates when the heater is active. For dehumidified heating, both the HEAT and A/C buttons should be activated.

    You can return to automatic control of the climate system at any time by pressing THIS button.

    To defrost or defog front and side windows, press THIS button. The indicator light will illuminate and air flow will be directed to the front and side windows. Adjust the temperature to a setting that will best meet weather conditions. For windshield deicing, set the temperature to maximum heat. Also, using the manual fan control, set the fan speed to HIGH.

    To defrost or defog the rear window and, if so equipped, the outside mirrors, press the REAR WINDOW DEFROSTER button. The indicator light will illuminate. After defrosting, press again to turn OFF. If not turned OFF manually, this feature will automatically turn off after a period of time.

    There are temperature sensors that regulate the automatic climate control settings. Please keep these areas clear of papers and other materials.

    To help reduce power consumption of the lithium-ion battery for heating or cooling the vehicle, you can set the climate control system to preheat or precool the vehicle while it is connected to the charger. The climate control timers can be set to a specific time for each day of the week, or set to run only on specific days.

    To set the climate control timer:
    ● Press the ZERO EMISSION button on the control panel,
    ● Then touch CLIMATE CONTROL TIMER.

    The current schedule for the timers will be displayed. Touch EDIT SCHEDULE to adjust the days and times. Touch THESE keys to enable or disable either of the two available timers. Touch a day of the week to activate or deactivate the timer for that day. Use THESE keys to adjust the time. When you have finished adjusting the times, touch SAVE.

    From the timer schedule screen, touch TIMER WITH PRIORITY to adjust the priority of the climate control timer in relation to the overall charging of the vehicle. If you select CHARGING TIMER, the climate control timer will not be activated unless the charge level for the vehicle charging timer has been reached. If you select CLIMATE CONTROL TIMER, the climate control timer activates regardless of vehicle charge level.

    THIS light on the heater and air conditioner controls illuminates when a climate control timer is set.

    Please see your Owner’s Manual for important safety information, system limitations and additional operating information.



    http://w34.us/amz/B00AY9HJ10 A blowoff valve (BOV) or dump valve is a pressure release system present in most turbocharged engines. Its purpose is to …

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    WhatsApp Online Chat !