Factory For TU-1J04 thermal wax actuator for electric switch valve Export to Somalia

Factory For
 TU-1J04 thermal wax actuator for electric switch valve Export to Somalia

Short Description:

Product Detail

Product Tags

All we do is always involved with our tenet " Consumer initial, Trust first, devoting within the food stuff packaging and environmental defense for Radiator Valve Kit , Thermal Actuator Underfloor Heating , Automation Control Valve , The mission of our company is to provide the highest quality products with best price. We are looking forward to doing business with you!
Factory For TU-1J04 thermal wax actuator for electric switch valve Export to Somalia Detail:

1. Operation Principle

The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.

2. Characteristic

(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.

(2)Temperature control is reliable and nicety

(3)No shaking and tranquilization in working condition.

(4)The element doesn’t need special maintenance.

(5)Working life is long.

3.Main Technical Parameters

(1)Handspike’s height may be confirmed by drawing and technical parameters

(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.

(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.

(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.

(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.


Product detail pictures:

Factory For
 TU-1J04 thermal wax actuator for electric switch valve Export to Somalia detail pictures


Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for Factory For TU-1J04 thermal wax actuator for electric switch valve Export to Somalia, The product will supply to all over the world, such as: Nairobi , Bahrain , azerbaijan , With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and solutions and good service for domestic and international customers.



  • https://www.eibmarkt.com/de/products/bticino-bticino-Vorlage-LN4691-37.html
    bticino SCS Thermostat N4692 – Aktionspreis
    Raumthermostat mit Stellrad zum manuellen Verändern der Solltemperatur um ±3 °C, Frostschutz und Aus, Messbereich 3-40 °C, Kontroll-LEDs für Betrieb und Heizen/Kühlen, Farbe: weiß

    https://www.eibmarkt.com/en/products/bticino-SCS-thermometer-with-display-anthracite-LN4691-MyHome-bticino-38.html

    bticino SCS Thermostat N4692 – Special offer
    The device can adjust the room temperature in both winter and summer, varying the settings locally with respect to those received from the central unit. The item has a knob for the local temperature selection (limited to ± 3°C with respect to the value set by the central unit), the antifrost mode and the OFF mode. There are two LED, one green and one yellow, on the front of the item. The green LED indicates that the device is working correctly and the activation of the antifrost mode and OFF of the corresponding area. The yellow LED indicates the actuator state and any faults.OFF modeThis mode has the maximum priority, whether selected by the probe or set by the central unit, to quit the OFF mode use the device which set it.Antifrost/thermal protection modeIn this position if the Temperature control system is set as heating the probe works in antifrost mode, if it is set as cooling it works as thermal protection. The probe can also work in collaboration with other probes in ´´master´´ configuration to allow the Central unit to calculate an average of the temperature over several measuring points. This function is useful for managing very large rooms, inside which the temperature can vary appreciably.If there is a fault on the central unit, the probe works with the last settings received, thus continuously maintaining the last temperature determined with summer or winter setting.If the probe selects the OFF mode this has priority even if the central unit is faulty, thus the zone controlled by the probe will remain OFF.The probe can be used to control a zone with up to 9 actuators of the same type, and 8 slave probes (4693, 573921, 573920 and 067458).Related articles:682 46 (Cover White)685 46 (Cover Titanium)Technical data- Power supply from SCS BUS: 27 Vdc- Operating power supply with SCS BUS cable: 18–27 Vdc- Absorption: 6 mA- Operating temperature: 0 – 40°C- Size: 2 modules- Installation height: 1500 m from the floor

    EAN: 8012199662091
    Bussystem-Raumtemperaturregler



    Production Amount per Day:
    560 ⇒ 940 pieces: ⇒ Productivity Improvement of 68%

    https://www.intelligentactuator.com/reduce-manufacturing-costs-ct-effects/

    [Equipment Overview]
    An apparatus for applying an adhesive to the cover of lamp lights and an indicator light in the manufacturing of electronic components.

    X-axis: RCP2-SA7C
    Y-axis: RCP2-SA7C
    Z axis: ISB-MXL
    Dispensing of the adhesive: RCP2-RA10C

    [Problems of the air cylinder used]
    1: They were dispensing the adhesive by using the air cylinder. The dispensing rate was changed because the air pressure was unstable and the adhesive was interrupted or lumped.
    2: The viscosity of the adhesive changes under the conditions such as temperature, so that it took time to adjust the dispensing pressure.
    3: Defective parts were made when the adhesive that attached to the work parts formed adhesive strings that weren’t cut off after dispensing.

    [Benefits of the electric actuator]
    The 45 seconds cycle time has been reduced to 30 seconds because the amount of adhesive dispensed always stayed stable.
    This enabled the supply of adhesive to be stable all day after trial testing each morning.
    The failure rate due to adhesive dispensing reduced to almost zero from about 10 pieces a day since they set movement to cut clean the dispensed adhesive.
    This movement was of the electric actuator in the vertical direction and the slide table.
    Project Comparison / Equipment with the air cylinder / Equipment with the ROBO Cylinder
    Cycle Time / 45 seconds / 30 seconds
    Duration of Choco-Tei per event / 60 minutes per day / 60 minutes per day
    Production per day / 560 pieces(*1) / 940 pieces(*2)
    (*1) When the air cylinder was used: (8 hours – 1 hour Choco-Tei) ÷ 45 seconds = 560 pieces per day
    (*2) When the ROBO Cylinder was used: (8 hours – 10 minutes) ÷ 30 seconds = 940 pieces per day

    Actuators
    RCP2-SA7C (2 axes) / PSEL / RCP2-RA10C
    Controllers:
    PCON-CFA / ISB-MXL / XSEL

    https://iaiquality.com/2014/06/26/adhesive-applicator-ct-effects-application-example/

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    WhatsApp Online Chat !