factory Outlets for Thermostatic Wax Series Wholesale to London

factory Outlets for
 Thermostatic Wax Series Wholesale to London

Short Description:

Product Detail

Product Tags

The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for Radiator Thermostatic Valves Fit Screw Air Compressor Thermostat Valve Core , Micro Spring Thermal Actuator , Wax Motor Actuator , We always concertrating on developing new creative product to meet request from our clients all over the world. Join us and let's make driving safer and funnier together!
factory Outlets for Thermostatic Wax Series Wholesale to London Detail:

The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.

For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.

Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.

Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.

 

Model Number

Appearance

(Normal Temperature)

Quality Standard

Range of Temperature

Control

Effective Distance

Travel

Water-Solubility

Acid and Alkali

Mechanical Impurity

 

B100

Powder, Slice , Column

90/100

≥10

Non.

Non.

B105

Powder, Slice , Column

95/105

≥10

Non.

Non.

B110

Powder, Slice , Column

100/110

≥10

Non.

Non.

B115

Powder, Slice , Column

105/115

≥10

Non.

Non.

B120

Powder, Slice , Column

110/120

≥10

Non.

Non.

B125

Powder, Slice , Column

115/125

≥10

Non.

Non.

B130

Powder, Slice , Column

120/130

≥10

Non.

Non.

B135

Powder, Slice , Column

125/135

≥10

Non.

Non.

B140

Powder, Slice , Column

130/140

≥10

Non.

Non.

B145

Powder, Slice , Column

135/145

≥10

Non.

Non.

B150

Powder, Slice , Column

140/150

≥10

Non.

Non.

B155

Powder, Slice , Column

145/155

≥10

Non.

Non.

B160

Powder, Slice , Column

150/160

≥10

Non.

Non.

B165

Powder, Slice , Column

155/165

≥10

Non.

Non.

B170

Powder, Slice , Column

160/170

≥10

Non.

Non.

B175

Powder, Slice , Column

165/175

≥10

Non.

Non.

B180

Powder, Slice , Column

170/180

≥10

Non.

Non

 

 


Product detail pictures:

factory Outlets for
 Thermostatic Wax Series Wholesale to London detail pictures


"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our firm to the long-term to develop together with consumers for mutual reciprocity and mutual advantage for factory Outlets for Thermostatic Wax Series Wholesale to London, The product will supply to all over the world, such as: Austria , Cape Town , Paraguay , We mainly sell in wholesale, with the most popular and easy ways of making payment, which are paying via Money Gram, Western Union, Bank Transfer and Paypal. For any further talk, just feel free to contact our salesmen, who are really good and knowledgeable about our prodcuts.



  • The valves manufactured and sold by ETM ARMATUREN.

    ETM trade mark:ETMARMATUREN,ETM,ETMVAL,欧罗泰克.
    ETM products including:
    DIN Standard bellows sealed stop valves (Straight-Through Type)
    DIN Standard Bellows Sealed Stop Valves (Angle Type)
    DIN Standard Long Life-Heavy Duty Bellows Sealed Stop Valves
    DIN Standard Gland Packing Globe Valves ( Straight-Through Type)
    DIN Standard Gland Packing Globe Valves (Angle Type)
    DIN Standard F4 Gate valves (Length acc.to DIN EN 558-1,face to face series 14)
    DIN Standard F5 Gate Valves (Length acc.to DIN EN 558-1,face to face series 15)
    DIN Standard F7 Gate Valves (Length acc.to DIN EN 558-1,face to face series 26)
    DIN Standard Swing Check Valves (Length acc.to DIN EN 558-1,face to face series 48 & series 1)
    DIN Standard Lift Check Valves
    DIN Standard Y Type Strainer
    Furthermore we can manufacture and process the specifical valve upon customer’s request.
    ETM all valves comply to Pressure Equipment Directive 97/23/(PED),CE Marking.
    ETM insists on the spirit of Deploitation , innovation, factualism and struggling, with the flexible management system. We aim to supply the qualified products and pro-service and after-service which will satisfy you. Welcome visit to ETM.
    Gate Valves (F5 Type)
    DIN Standard F5 Gate valves / (Length acc.to DIN EN 558-1,face to face series 15 )
    DIN F5 Gate valve
    DIN Absperrschieber F5
    DIN Válvulas de compuerta F5
    DIN F5 šoupátko stavební délka dle DIN EN558-1 serie 15
    DIN Standard F5 sluseventil (lengde iht. DIN EN 558-1, bygge lengde serie 15)
    DIN Standardında F5 Sürgülü Vana
    Van cổng chuẩn DIN kiểu F5

    ETM Code No. : ETM FIG.F.161, ETM FIG.F.162
    This ETM gate valve can be used in Industry, Powerstations, Flue gas purification plant, processing technology, gas supply,

    vapor facilities, thermal oil applications, recycling facilities, vacuum facilities, ammonia, hot water, heating technology, district

    heating, cooling and freezing systems, general plant manufacturing, steam systems.

    All ETM valves – is classed leak rate “A” in accordance with EN 12266-1.

    Products:
    ETM-FIGURE F-BS/EN Standard F5 gate valve PN 16 Bar with Flanges According to DIN EN 1092-1
    ETM-FIGURE F-BS/EN Standard F5 gate valve PN 25 Bar with Flanges According to DIN EN 1092-1
    ETM-FIGURE F-BS/EN Standard F5 gate valve PN 16 Bar with Butt Weld Ends According to DIN EN 12627
    ETM-FIGURE F-BS/EN Standard F5 gate valve PN 25 Bar with Butt Weld Ends According to DIN EN 12627

    Material Equivalence:
    EN Material Name———————–EN Number ————Forgings—————–ASTM Material——————-Forgings
    EN 10213 GP240GH———————1.0619——————1.0460—————–ASTM A216 WCB—————–A105
    EN 10213 G20Mo5———————–1.6220——————1.0437—————–ASTM A352 LCB——————A352 LF2
    EN 10213 G17CrMo5-5——————1.7357——————1.7335—————–ASTM A217 WC6—————–A182 F11
    EN 10213 G17CrMo9-10—————-1.7379——————1.7380 —————-ASTM A217 WC9—————–A182 F22
    EN 10213 GX5CrNi19-10—————-1.4308——————1.4301—————–ASTM A351 CF8—————–A182 F304
    EN 10213 GX5CrNi19-11-2————-1.4408 —————–1.4401—————–ASTM A351 CF8M—————-A182 F316

    Features:
    Cast steel PN16 ,PN25, DN40 to DN1000
    Length acc.to DIN EN 558-1,face to face series 15 (DIN3202 series F5)
    Rising, non rotating stem
    Non rising stem
    Welded seat in stellite or Cr-steel
    Solid stem make of stainless material
    Full port design Full length wedge guides
    Stem sealing in graphite Raised, turning stem
    Back sealed stem Welded seat in stellite or Cr-steel
    High-tensile Gland Packing Self adjusted gland
    Top Flange to ISO 5210
    Gear operated
    Electric actuator
    Position indicator
    Locking / interlock
    Stem protection
    Stem extension
    Drain plug
    By pass

    Mediums:
    Standard: Steam, gases, hot water, thermal fluids, hot oil, process water, etc.
    Stainless Steel: Process water, aggressive media, etc.

    Requirements and testing:
    The test are carried out according to DIN EN12266-1
    Shell test : nominal pressure (PN)X1.5
    Tightness of seat :nominal pressure (PN)X1.1
    Certificate of conformity in according to with PN-EN10204
    Design according to PN-EN12516-2
    Valves have been submitted for appraisal of conformity according to the directive pressure equipment directive 97/23/EC.

    Installation:
    They can be installed on pipelines in a vertical or horizontal and operation only when fully open or closed

    Connection:
    Butt-Welded according to EN12627,flanged according to EN1092-1 or to customer request
    Face to face dimensions according to EN558-1 15 Series (DIN3202 Series F5)

    Operation:
    Handwheel (If required)
    Electric actuator
    Gear box
    Flange ISO5210 (Ready for actuator)



    Click Here To See the Bonus Video

    https://quickwaterheater.com/learning-center/#1454584230877-dc4c2601-42

    How To Replace The Thermocouple

    In this video you will learn How To Replace The Thermocouple.

    Please visit us at quickwaterheater.com or call (619) 663 – 4328

    What is a Thermocouple?

    QUICK ANSWER: A thermocouple lets the pilot light in your water heater stay on. When the thermocouple is operating properly it will tell the thermostat to turn on the main burner. The main burner is what heats the water in your water heater. The thermocouple is a very simple part but it has a very important job. If your thermocouple is not operating properly your water heater will not turn on.

    TECHNICAL DETAILS: A thermocouple is a temperature measuring unit that conducts energy between two dissimilar conductors. The unit is usually made of copper and a different metal. When one end of the thermocouple senses a different temperature it will create a small amount of electricity. I.e. one end in the pilot flame and one end in the thermostat. The millivolts are registered by the controller and allow the main burner to ignite. When the thermocouple is malfunctioning it will not keep the pilot light lit. When the pilot light is not lit, the thermostat will not allow the main burner to ignite.

    https://quickwaterheater.com/what-is-a-thermocouple/

    How To Replace The Thermocouple

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    WhatsApp Online Chat !