Factory Outlets TU-027 thermostatic cartridge wax sensor for sanitary ware for Thailand Factories
Short Description:
Product Detail
Product Tags
Factory Outlets TU-027 thermostatic cartridge wax sensor for sanitary ware for Thailand Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Our firm aims to operating faithfully, serving to all of our consumers , and working in new technology and new machine continually for Factory Outlets TU-027 thermostatic cartridge wax sensor for sanitary ware for Thailand Factories, The product will supply to all over the world, such as: Philippines , Mauritius , Karachi , We look forward to hearing from you, whether you are a returning customer or a new one. We hope you will find what you are looking for here, if not, please contact us immediately. We pride ourselves on top notch customer service and response. Thank you for your business and support!
Simple demonstration of a temperature sensor. I have used an Atmel MCU to measure the temperature coming from the LM35 sensor. It outputs a voltage with a slope of 10 mV/°C.
The MCU provides an internal SAR ADC with 10-bit resolution. The Analog Reference was set by software to 2.56 V. This voltage is auto-generated by MCU so it won’t need any external reference. By this settings the ADC result will correspond to 0×004 (10-bit) for each celsius grade. The MCU allows to Left Adjust the ADC result, so you can get the 8 MSB of the 10 bit conversion. Notice that with 10-bit resolution and 2.56 V as Analog Reference you can use the 8 MSB of the result without making strange calculations, in fact each ADC unit (of the 8 MSB) corresponds to 1°C. Very good! (just make some calculations to demonstrate it).
However by taking the 8 MSB you have a resolution of 1°C. So, if you need more resolution, just consider also the 2 LSB. 2 bits correspond to 4 cases, so by considering the 2 LSB you can have a resolution of 1/4 °C. Not bad!
Finally, after a conversion of the ADC result to ASCII character, the temperature is displayed into the LCD with a refreshing rate of 1 Hz.
In future I’ll implement a clock by getting the time from the DS1307 RTC. It needs of TWI (or I2C) communication to be read/written.
-The MCU used is ATmega8535 (datasheet link: https://www.atmel.com/images/doc2502.pdf)
- The LCD Display controller is KS0070B (the logic is compatibile with Hitachi HD44780 controller)
-The Temperature Sensor used is LM35DZ (datasheet link: https://www.ti.com/lit/ds/symlink/lm35.pdf)
=== UPDATE #1 12-08-2013: ===
Get the source code!
- Source code: https://github.com/alfeale/temperature-sensor-w-lcd
Net cop Home Automation is a Wired/Wireless Automation system that is supposed to be implemented in under construction/prebuilt houses without any changes in the infrastructure. Home Automation let the user to control the home from his or her Tablet, Mobile or computer and assign action that should happen depending on time or other sensors readings such as Light, Temperature or sound from any device in the Home automation network. It also saves Electricity, water & also alerts us of any gas leakage or fire incident.
Net cop home Automation allows one to control house hold appliances from a centralized control unit. These appliances include Lights, Fans, Air Conditioners, Security Cameras, Electronic Doors, Computer system, Audio/Visual Equipment etc. these appliances were connected with circuit specially designed to be compatible with each other and with the control unit.
The implementation of Net cop Home automation system is easy and fast. Also it can be integrated into a buildings electrical system and allows one to wirelessly control lights, Fan and turn On/Off any appliances that are connected with the system. The system can be controlled using central touch panel, mobiles, tablets, internet and normal electrical switches, all these things works in parallel.
