Factory Price TU-1D02 thermal wax actuator for air conditioner and compressor to Saudi Arabia Manufacturer

Factory Price
 TU-1D02 thermal wax actuator for air conditioner and compressor to Saudi Arabia Manufacturer

Short Description:

Product Detail

Product Tags

Our well-equipped facilities and excellent excellent management throughout all stages of creation enables us to guarantee total buyer satisfaction for Automatic Temperature Control Hvac , Wholesale Sensing Wax , Auto Cooling System Part , We sincerely welcome you come to visit us. Hope we have good cooperation in the future.
Factory Price TU-1D02 thermal wax actuator for air conditioner and compressor to Saudi Arabia Manufacturer Detail:

1. Operation Principle

The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.

2. Characteristic

(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.

(2)Temperature control is reliable and nicety

(3)No shaking and tranquilization in working condition.

(4)The element doesn’t need special maintenance.

(5)Working life is long.

3.Main Technical Parameters

(1)Handspike’s height may be confirmed by drawing and technical parameters

(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.

(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.

(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.

(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.


Product detail pictures:

Factory Price
 TU-1D02 thermal wax actuator for air conditioner and compressor to Saudi Arabia Manufacturer detail pictures

We have many excellent staff members good at marketing, QC, and dealing with kinds of troublesome problem in the production process for Factory Price TU-1D02 thermal wax actuator for air conditioner and compressor to Saudi Arabia Manufacturer, The product will supply to all over the world, such as: Tunisia , Belarus , Mexico , We look forward to hearing from you, whether you are a returning customer or a new one. We hope you will find what you are looking for here, if not, please contact us immediately. We pride ourselves on top notch customer service and response. Thank you for your business and support!

  • PVC Pipe Extrusion Line is mainly used in the manufacture of the plastic PVC pipes with various diameters (from 16-630mm)and wall thickness in the aspects such as the agricultural and constructional plumbing, cable laying etc. It is composed of the conical twin-screw extruder, vacuum calibrating and cooling tank, haul off unit, cut off unit and stacker. The unit is of the reliable performance and high production efficiency. Our company may allocate the special installation for the manufacture of the inner wall spiral coil and core ply blister tube set according to the client s requirements.

    PVC Pipe Extrusion Line/Production Line/Making Machine/Extruder/Machine

    Complete extruder and extrusion lines for production of PVC pipes in diameter from 16 to 630mm.We also design and manufacture machines for production of CPVC pipe and PVC foam core pipe.

    To produce variety of PVC pipe for water supply, drainage, cable protection ,etc


    1,SJSZ Conical twin screw extruder: using the high efficient conical twin screws, specially designed for PVC power to ensure uniformed plasticization, high extrusion. Stable temperature controlling system can guarantee high quality pipe extrusion.

    2,Mould: spiral type die head can not only ensure high speed extrusion, but also avoid the thermal decomposition of amorphous plastics and get high quality pipes. There is heating control system inside of the mould, high efficient, easy to extrude. Bronze calibrators can make the pipes fast calibrated and cooled.

    3,Spraying and cooling tanks: Rapid vacuum calibrating system allows the hot extruded pipes to be cooled in a very short time and obtain the final pipe diameter. Automatic temperature control system, pressure regulator, and vacuum control valve greatly enhance the pipe sizing and cooling performance as well as the production speed.
    4,Haul off machine: adopts caterpillar type, which includes two-claw types, three-claw types, four-claw types, six-claw types, eight -claw types, ten-claw types, twelve-claw types etc, suitable for different sizes of pipes. Haul off caterpillar blocks are made of abrasion resistant rubber material, which can make a high and stable hauling speed.

    5,Cutting machine:precision machine cutter is able to make flat, straight cuts into pipes at high speed. A powerful suction device gathers up waste scraps after cutting, thereby making it easier for users to clean the cutter.

    6,Pipe belling machine: automatic pipe belling machine comes with 2 heating ovens to ensure pipe belling quality and productivity.

    Contact information: John

    Phone: 0086-13468282172

    What app: 13468282172(Viber)


    Skype: john.li1984

    #include 16f877a.h
    #device adc=10 // Set ADC resolution to 10Bit
    #use delay(clock=4000000)
    #use rs232(baud=9600,xmit=PIN_C6,rcv=PIN_C7,ERRORS)
    #include “flex_lcd.c”

    #define LOAD PIN_B7
    #define THRES 30.0 // load switching threshold in Celsius

    int16 digital_reading; // ADC resolution is 10Bit, an 8Bit integer is not enough to hold the reading
    float temp;

    void main()

    /* ADC Initialization */
    setup_adc(ADC_CLOCK_INTERNAL); // initialize ADC with a sampling rate of Crystal/4 MHz
    setup_adc_ports(RA0_ANALOG); // set PIN_A0 as analog input channel
    set_adc_channel(0); // point ADC to channel 0 for ADC reading
    delay_ms(1); // ADC module is slow, needs some time to adjust.

    /* Peripherals Configurations */
    lcd_init(); // Turn LCD ON, along with other initialization commands
    output_low(LOAD); // the load is initially OFF
    lcd_gotoxy(1,1); // point LCD cursor to col1 row1
    lcd_putc(“Temperature is:”); // print on LCD

    while(1) // infinite loop

    digital_reading = read_adc(); // capture current temperature reading
    delay_us(100); // 0.1ms delay for ADC stabilization
    temp = digital_reading * 0.4883; // convert reading to Celsius
    lcd_gotoxy(1,2); // point LCD cursor to col1 row2
    printf(lcd_putc,”%2.1f C”,temp); // print value on LCD

    if(temp=THRES) output_high(LOAD); // Control Load
    else output_low(LOAD);

    delay_ms(1000); // 1 second delay between readings

    Send your message to us:

    • * CAPTCHA: Please select the Star

    Related Products

    • * CAPTCHA: Please select the Car

    WhatsApp Online Chat !