Factory source manufacturing Thermostatic Wax Series to Ecuador Manufacturer
Short Description:
Product Detail
Product Tags
Factory source manufacturing Thermostatic Wax Series to Ecuador Manufacturer Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility Acid and Alkali |
Mechanical Impurity |
||
|
B100 |
Powder, Slice , Column |
90/100 |
≥10 |
Non. |
Non. |
|
B105 |
Powder, Slice , Column |
95/105 |
≥10 |
Non. |
Non. |
|
B110 |
Powder, Slice , Column |
100/110 |
≥10 |
Non. |
Non. |
|
B115 |
Powder, Slice , Column |
105/115 |
≥10 |
Non. |
Non. |
|
B120 |
Powder, Slice , Column |
110/120 |
≥10 |
Non. |
Non. |
|
B125 |
Powder, Slice , Column |
115/125 |
≥10 |
Non. |
Non. |
|
B130 |
Powder, Slice , Column |
120/130 |
≥10 |
Non. |
Non. |
|
B135 |
Powder, Slice , Column |
125/135 |
≥10 |
Non. |
Non. |
|
B140 |
Powder, Slice , Column |
130/140 |
≥10 |
Non. |
Non. |
|
B145 |
Powder, Slice , Column |
135/145 |
≥10 |
Non. |
Non. |
|
B150 |
Powder, Slice , Column |
140/150 |
≥10 |
Non. |
Non. |
|
B155 |
Powder, Slice , Column |
145/155 |
≥10 |
Non. |
Non. |
|
B160 |
Powder, Slice , Column |
150/160 |
≥10 |
Non. |
Non. |
|
B165 |
Powder, Slice , Column |
155/165 |
≥10 |
Non. |
Non. |
|
B170 |
Powder, Slice , Column |
160/170 |
≥10 |
Non. |
Non. |
|
B175 |
Powder, Slice , Column |
165/175 |
≥10 |
Non. |
Non. |
|
B180 |
Powder, Slice , Column |
170/180 |
≥10 |
Non. |
Non |
Product detail pictures:
To fulfill the customers' over-expected fulfillment , we have now our solid staff to deliver our greatest general assistance which includes internet marketing, product sales, creating, manufacturing, excellent controlling, packing, warehousing and logistics for Factory source manufacturing Thermostatic Wax Series to Ecuador Manufacturer, The product will supply to all over the world, such as: Mexico , Paraguay , UK , We follow up the career and aspiration of our elder generation, and we are eager to open up a new prospect in this field, We insist on "Integrity, Profession, Win-win Cooperation", because we have a strong backup, that are excellent partners with advanced manufacturing lines, abundant technical strength, standard inspection system and good production capacity.
Actuator is designed and manufactured for HVAC, BAS, AHU etc
Video Notes:
This shows how a heliostat can also be used to combine all the light rays into a tight focus or concentrated spot of energy (see Fig. 3 where the left (L) side of the mirror has been slightly adjusted). Unlike with a parabolic mirror, the targer/or receiver does not interfere with the collected/refelected light at the mirror, hence the larger the receiver/target the more feasable to use a heliostat rather than a parabolic dish.
In the video I show the left side of the mirror “hard or fixed mounted” to the right side of the mirror in all the figures. Each mirror adds more weight that the motors need to be able to move. Today, there are very thin (1/16 inch thick) mirrors and even highly reflective and lightweight mylar films that can be used for mirrors…these may need some stability from the wind though.
Note that the light rays from the Sun that strike the mirror are nearly parallel, and since the mirror is flat, the light rays that reflect will also be nearly parallel since they will be reflected at the same (angle).
Technically for the (heliostat) mirror to reflect the light of the Sun onto a fixed target/collector/receiver that the face/surface of the mirror is “aimed” at both the horizontal (left to right) and vertical (up and down) angle bisection (half the angle) points between the Sun and the receiver. This is somewhat indicated with the purple line in the video.
It is very feasable, like others have already done, to have “ganged” or mechanically linked mirrors that move as the “main or primary” heliostat mirror moves. But these “secondary” mirrors can have their very own receiver and be easilly set to others, or if needed, even the light can be combined to increase the energy focused onto the receiver.
The closer the Suns rays and reflected rays are on the same line, the more energy collected. As the Sun sets, the less energy collected by the mirror since the length of the effective cross section of the mirror that receives the Sunlight is less. Of course you could adjust/move the target/receivers position so as to remedy this a bit, and if your concentrating the light from several fixed mirrors to a central focus, the receiver will have to be at the same distance (ie. radius) from the primary mirror so that all the light rays from each mirror will intersect at the receiver.
There are several good sites related to heliostats. The field needs new developments and ideas from you. It’s not just about heliostats, but about CNC too. Do you know something about gears, heliostats, mirrors, solar things, or stepper motors, etc. Here is a good site and forum that you can join:
https://cerebralmeltdown.com
also
https://redrok.com
This video was made by me, however some of the concepts are probably already known to those in the field, so I cant take full credit of all the concepts presented, but are indebted to those who had previously thought about such matters. Some of the great concepts of heliostats first came from using mirrors to communicate (with light and shadow) with over long distances perhaps up to 10 miles or so. This would be the equivalent of a mobile walk-talkie or cellphone today.
Heliostat = helio + stat = Sun + Stationary or Static , where the receiver is the static or stationary part of the system, or: to keep the Sun light in the same position.
(c) trailkeeper on YouTube.com
