Factory supplied TU-1F90 thermal wax actuator for automobile engine thermostat manufacturers for Ghana Importers
Short Description:
Product Detail
Product Tags
Factory supplied TU-1F90 thermal wax actuator for automobile engine thermostat manufacturers for Ghana Importers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for Factory supplied TU-1F90 thermal wax actuator for automobile engine thermostat manufacturers for Ghana Importers, The product will supply to all over the world, such as: Iran , New Zealand , Japan , We have been sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy you with our high-quality products and solutions and perfect service . We also warmly welcome customers to visit our company and purchase our products.
These display units are presented to show you a comparison of energy consumption between a ROBO Cylinder® and air cylinder. The results are shown on the touch panel.
The display shows the electricity costs and CO2 emissions while the cylinders are operating.
Electricity bills, CO2 emissions were calculated based on ROBO Cylinder’s power consumption and the measured flow rate of compressed air consumed by the air cylinder. The results are shown on the touch panel.
According to this comparison, ROBO Cylinder’s energy consumption falls to about one-fifth the levels of the air cylinder. You can cut CO2 emissions and running cost by more than 80%.
We can also compare the degrees of vibration of the weights on springs, showing the difference between the levels of impact generating at the end of the stroke on both cylinders.
How solenoid valves work
