High Definition For Electric Wax Series to Malaysia Manufacturer
Short Description:
Product Detail
Product Tags
High Definition For Electric Wax Series to Malaysia Manufacturer Detail:
(1) Special Seal Wax for Electronic Elements
This series of products have very good moisture proof capability and good capability for enduring temperature changed. Its’ hardness and viscosity are temperate, and it’s pliability and plasticity are well. They have excellent electrical property parameters. Their high frequency loss is few. They have no any corrosion. Their various processing property are stable.
This series of products are mainly applicable for dipping electrical coil such as electronic tuner coil, various oscillator coils, adjustable inductance electronic component, electronic transformer and color TV luminance delay，thermal seal to some materials.
(2) Dipping Seal wax for Various Capacitors
This series of products have eight grades, which their common characteristic are excellent insulating property, well moisture proof capability, low loss, well compatibility and oxidation resistance. The drop melting point from 65℃ to 145℃, can be adapt to the demands for insulating envelopments with different ranges.
This series of products are mainly applicable for dipping envelopment of the electronic elements such as line-motivating transformer, color TV delay coil, various film and paper capacitor, porcelain capacitor, etc.
(3) Sealing wax for Power Capacitor
This series of products have outstanding insulation impedance and low loss. They have a suitable air-absorption capacity and appearance surface. Their performance is stable. They have a suitable hardness and viscosity, non-poisonous, tasteless and low acid value.
This series of products are mainly applicable for dipping & seal of the metallic capacitor such as the low-voltage power capacitor, alternating current capacitor, household appliances capacitor, etc.
Product detail pictures:
Innovation, excellent and reliability are the core values of our business. These principles today extra than ever form the basis of our success as an internationally active mid-size company for High Definition For Electric Wax Series to Malaysia Manufacturer, The product will supply to all over the world, such as: Bandung , Malta , United States , By integrating manufacturing with foreign trade sectors, we can provide total customer solutions by guaranteeing the delivery of right products to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified product portfolios and the control of the industry trend as well as our mature before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.
Automatic Aerated Concrete Block line(Dongyue Brand),autoclaved concrete Concrete block machine, cellular concrete block machine, porous concrete machinery, Ytong AAC block machine(Austria and Slovenia), Hebel AAC block machine(Australia), Aircrete and Thermalite AAC block machine(UK), and BCA AAC block machine (Romania)., AAC block machine, light weight block machine, AAC block machine projects, more information,kindly feel free to let me know.
Contact:Jerry Gao
Email:buildingmachines@gmail.com
MSN:aacblockmachine@hotmail.com
Phone:0086-15054985958
Automatic Aerated Concrete Block line(Dongyue Brand) Introduction:
Automatic Aerated Concrete Block line(Dongyue Brand),Aerated concrete brick(light weight block) is the light and porous building material, it has light weight keep temperature fire resistant and other advantages, it can be made into many kinds of blocks, the length:600mm, height:300mm,250mm,200mm,150mm, width:300mm,250mm,200mm 150mm,125mm,100mm,they could be used for industry building and common building, they are more and more popular in the world, in the future, they will replace the clay bricks completely.
2 Aerated concrete common conception.
Common concrete block density is usually 1600-2400 kg/m3,but aerated concrete are 600kg/m3,
650kg/m3,700kg/m3.it has no the big grain, mainly use silicon materials(for example: coal ash, sand, stone dust and others). Through making the material small for example: sand, they can be used directly if has enough degree of small(for example, coal ash, mixing calcium material,lime,cement water to a special slop, then add the aluminum powder and the addictive, make the aluminum powder and the special slop have a chemical reflect, then produce hydrogen to make the concrete slop to expanding or swell, expanding, next put them into the curing room to curing, then cutting, steaming, last, there will become the light block, the porous rate is 70%-80%.
3 advantages
Light weight
Aerated concrete density is usually 600-800kg/m3(according to the market in production), same as 1/3 of clay brick and 1/5 of common concrete, so use the light brick can reduce the weight of the building, and also reduce the beam of roof and pillar press, also you can see, it can save the material and costs,
Keep temperature.
It has many porous, the delivery hearting coefficient is 0.9-0.22W/MK, so it is the best materials in the world now, also many kinds of raw materials, have lowest waster materials, coal ash, sand waste mine materials stone dust and other silicon materials.
We are the top leader in China on manufacturing the autoclaved aerated concrete line(aac)with 65% markets share, we have exported our lines to different countries ——-Vietnam, India, Russia, Thailand, Ukraine, Middle East and so on.
We can supply our customer for designing, production, installation, commissioning, training and good after-sales service.
Capacity: from 50000 cubic meter to 300,000 cubic meter per year.
Equipments: stocking raw materials, mixing, molding, forming, cutting, evaporating and curing, crane cramp, transporting etc.
1 product weight is according to 600kg/m3 to control,
2 annual biggest capacity 300,000 m3
3 set raw material proportion: cement 6.5%, raw lime 23%, flyash 68%,gypsum 3%,aluminum powder 350g/m3
4 water and material rate 0.631
5 one mould capacity 2.88m3
6 casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes.
7 casting slurry temperature: 38-42 degree.
8 body quiet stop, time is 2.5-2.5 hours, temperature 50-60 degree, after quiet stop body strength is 0.15-0.18 Mpa
9 steam curing cycle time, come in and our autoclave about 0.5 hour,steam curing cycle time about is 7 hours/1.2 Mpa, total 7.5 hours.
10
Cement lime flyash style aerated block raw material proportion.
name unit Cement lime fly ash
flash % 65-70
cement % 6-15
lime % 18-25
gypsum % 3-5
Aluminum powder paste(600kg/m3) 1/10000 8
Water & material rate 0.60-0.65
Casting system OC 36-40
Aluminum mixing time S 30-40
11. cement lime sand style aerate block raw material proportion
Name Unit Cement Lime Sand
Sand % 55-65
Cement % 10-20
Lime % 20-30
Gypsum % 2-3
Aluminum powder paste(600kg/m3) 1/10000 8
Water & material rate 0.65-0.75
Casting system OC 35-38
Aluminum mixing time S 30-40
Reference:cement is 42.5 Portland or 42.5 common cement.
Aluminum powder calculate to use according to 600kg/m3
Remark: the accurate batching rate is adjustable according to the raw material locally.
This single cylinder thermo acoustic engine operates from a tiny methylated spirits (denatured alcohol) flame. The optimum running speed is 2700rpm when warmed up fully. As far as we know this is the fastest thermo-acoustic engine available.
The thermo acoustic engine is known by several names, including resonant engine, lag engine, lamina flow engine and traveling wave engine. This engine, with its transparent main tube, beautifully and elegantly demonstrates the principles behind such engines.
How does it work?
The thermo-acoustic engine works by converting sound waves into motion. The sound waves are generated by heating one end of a ‘stack’ of coiled material and allowing the other end to remain cool.
The engine is fired by a small spirit burner. By heating the end of the coiled ‘stack’ a bouncing pressure wave is set up inside the tube. The crucial element in the thermo-acoustic engine is the ‘choke’, which reduces the bore of the tube.
It is the pressure fluctuations that ultimately drive the engine, in the expansion phase the piston is pushed outwards, in the contraction phase the piston is pulled inwards.
The engine requires a small push of the flywheel for it to start. Without the small push the pressure and velocity of the standing wave remain at equilibrium. Move the flywheel and the equilibrium is shifted, thus allowing the cyclic variations to take place.
