High Quality for TU-1F07 thermal wax actuator for thermostatic automatic water drain valve for Uganda Manufacturers
Short Description:
Product Detail
Product Tags
High Quality for TU-1F07 thermal wax actuator for thermostatic automatic water drain valve for Uganda Manufacturers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of High Quality for TU-1F07 thermal wax actuator for thermostatic automatic water drain valve for Uganda Manufacturers, The product will supply to all over the world, such as: Kuwait , Bangkok , Romania , Each customer's satisfactory is our goal. We are looking for long-term cooperation with each customer. To meet this, we keep up our quality and provide extraordinary customer service. Welcome to our company, we are expecting to cooperate with you.
A tutorial on how to perform the experiment in which we determine the energy band gap and study the variation of resistivity of semiconductor crystals.
Driver warms up until the target temperature is reached, and then the micro-controller selects a lower output level (1/2 of the target current in this case). Once the chip is manually cooled by the really cold CO2, the software control loop resets the output to full current. On the last part of the video the driver warms up once more, and the output drops again. Each board is calibrated to account for chip-to-chip variation, and not only are the temperature set points programmable, but the hysteresis is of course fully programmable as well.