Hot New Products Thermostatic Wax Series to Nairobi Manufacturer
Short Description:
Product Detail
Product Tags
Hot New Products Thermostatic Wax Series to Nairobi Manufacturer Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility Acid and Alkali |
Mechanical Impurity |
||
|
B100 |
Powder, Slice , Column |
90/100 |
≥10 |
Non. |
Non. |
|
B105 |
Powder, Slice , Column |
95/105 |
≥10 |
Non. |
Non. |
|
B110 |
Powder, Slice , Column |
100/110 |
≥10 |
Non. |
Non. |
|
B115 |
Powder, Slice , Column |
105/115 |
≥10 |
Non. |
Non. |
|
B120 |
Powder, Slice , Column |
110/120 |
≥10 |
Non. |
Non. |
|
B125 |
Powder, Slice , Column |
115/125 |
≥10 |
Non. |
Non. |
|
B130 |
Powder, Slice , Column |
120/130 |
≥10 |
Non. |
Non. |
|
B135 |
Powder, Slice , Column |
125/135 |
≥10 |
Non. |
Non. |
|
B140 |
Powder, Slice , Column |
130/140 |
≥10 |
Non. |
Non. |
|
B145 |
Powder, Slice , Column |
135/145 |
≥10 |
Non. |
Non. |
|
B150 |
Powder, Slice , Column |
140/150 |
≥10 |
Non. |
Non. |
|
B155 |
Powder, Slice , Column |
145/155 |
≥10 |
Non. |
Non. |
|
B160 |
Powder, Slice , Column |
150/160 |
≥10 |
Non. |
Non. |
|
B165 |
Powder, Slice , Column |
155/165 |
≥10 |
Non. |
Non. |
|
B170 |
Powder, Slice , Column |
160/170 |
≥10 |
Non. |
Non. |
|
B175 |
Powder, Slice , Column |
165/175 |
≥10 |
Non. |
Non. |
|
B180 |
Powder, Slice , Column |
170/180 |
≥10 |
Non. |
Non |
Product detail pictures:
We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Hot New Products Thermostatic Wax Series to Nairobi Manufacturer, The product will supply to all over the world, such as: UK , Paraguay , Korea , What is good price? We provide customers with factory price. In the premise of good quality, efficiency must be paid attention to and maintain appropriate low and healthy profits. What is a fast delivery? We make the delivery according to customers' requirements. Although delivery time depends on the order quantity and the complexity of it, we still try to supply products in time. Sincerely hope we could have long term business relationship.
Project Link:
https://engramikhalil.weebly.com/3d-multi-color-printer-machine.html
“ECHO” machine is a multi color 3D printer has been designed using of the addictive manufacturing techniques regarding the rapid prototyping process. This is technique known as (Fused Deposition Modeling – FDM). First, and like all 3D printer machines, the CAD file of the part which is wanted to be printed to a 3D object is exported with (STL) extension. This extension allows the 3D printer program to view the part as accumulative geometric surfaces rather like the surfaces resulted in (Finite Element Analysis – FEA). Using the 3D printer program, the part can be converted to many tiny slices and then these slices are sent in successive method to the 3D printer machine so the part will be built slice over slice until getting the full 3D built part at the process end, as a result this built part and the modeled part in the CAD program will be alike. This technique, for the purpose of building implement, is count on melting a thermal polymer which pours after positional melting form the actuator head nozzle. The actuator head traces the cross section of the processed slice and builds according to it until the full completely of the slice section. The procedure is repeated many times to complete the part building. This technique uses another thermal polymer as a supporting material to fill all part gaps and to support the built part body is case of balance adjusting during the building process. After the building end, the support material is got rid of and we will get a part or a product built from just the building material.
In this printer, the thermal polymer (Acrylonitrile butadiene styrene – ABS) is used, this plastic polymer melts in a Celsius degree between (180 – 220) degrees, and it’s provided in the markets as a filaments coiled around a roll, the used filament diameter is (1.75mm), ABS filaments substance has a color vary (in this machine the blue, red, yellow ones are used as a building material).
Regarding the supporting material, the used thermal polymer is (Polyvinyl acetate – PVA), this plastic polymer melts in a Celsius degree between (180 – 220) degrees, and it’s provided in the markets as a filaments coiled around a roll, the used filament diameter is (1.75mm) and it’s often found in white color (the roll located at the right side of the machine). The important specification for this material is the ability to dissolving into the water. Consequently, after building the part, it’s enough to submerge it into the water and so the supporting material will dissolve into the water and the building material will remain.
Both of building and supporting material are provided to the actuator head nozzle by means of a feeding mechanism which consists of a feeder for the purpose of pulling in the plastic filament from the roll and then guiding it into a canal ended with the melting chamber which is in touch with a ceramic heater (40 watt). And thus, the material is melted and poured out through the nozzle which has an orifice with diameter of (0.5mm). The feeding mechanism includes a cooler made from aluminium substance to prevent the heat from transferring toward the top. The number of actuator heads and feeders is four (three actuator heads for building and the remained one is for supporting). The heat exchange can be done for the four coolers by two fans behind the actuator heads.
Regarding the Mechanical Design Side, this machine has three axes (X,Y,Z). it depends for moving the actuator head along the (Y) axes, which it represents the machine gantry, on a motion method consists of a stepper motor and high accuracy synchronous pulleys and belt. The motion of the axis (Y) vertically along the axis (Z) is achieved by means of a pair of ball screws located at the two sides of the machine. According to the (X) axis, it’s the motion of the work table to front or back using stepper motor and synchronous pulleys and belt. In all axes, guiding mechanisms are used, they consist of rails with (V) shape and over them wheels with (V) shaped grooves are moving on them. In the (X) axis, in addition of the previous guiding mechanism there is a cylinder guider “Ball Spline” which is used to add more support for the table.
The work volume or field for this machine is (40cm×40cm×40cm).
Regarding the Dynamic Analysis, the inertia forces and torques were studied, and so the maximum and minimum velocity required to move the actuator head. Consequently, stepper motors were chosen, the number of them is like the number of the axes, these motors rotate (0.9 degree) by each pulse they get, these motors characterized with a high accuracy, the value of rotation will surely taken in consideration to determine the printer accuracy, the load torque for each motor is (4.4 Kg.cm). The building speed according to the (Y) axis is (150 mm/s) in maximum.
EEE184 (Intro To Feedback Systems) Final Project:
In this project the goal is to design a control system to maintain the water temperature in tank B at a desired value. Container A has cold water. The system should be able to read and display the temperature in tank B, and open hot water from container A to maintain the temperature constant in B. The system should have (as a minimum requirement): a temperature sensor, a microcontroller and a servo to control the valve.
Temperature Sensor: TMP-36
Microcontroller: Arduino Uno
Servo: HiTec (Standard Servo)
LCD Display: Sain LCD Module 20 x 4, White on Blue
https://www.amazon.com/gp/product/B003B22UR0/ref=oh_details_o01_s00_i01
