Low MOQ for TU-1D02 thermal wax actuator for air conditioner and compressor for Norwegian Manufacturers
Short Description:
Product Detail
Product Tags
Low MOQ for TU-1D02 thermal wax actuator for air conditioner and compressor for Norwegian Manufacturers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
It really is a good way to further improve our goods and service. Our mission would be to acquire inventive items to buyers with a very good encounter for Low MOQ for TU-1D02 thermal wax actuator for air conditioner and compressor for Norwegian Manufacturers, The product will supply to all over the world, such as: Hanover , Italy , Naples , We hope we can establish long-term cooperation with all of the customers. And hope we can improve competitiveness and achieve the win-win situation together with the customers. We sincerely welcome the customers from all over the world to contact us for anything you need!
After realizing we needed a linear actuator to draw a syringe to take a fluid sample one day before the competition we quickly made our own. We used a couple spare VEX angle bars, a threaded rod, a couple custom machined acrylic blocks, a 7.2V motor, and two limit switches to prevent over extension. Check out our blog: https://uctengtech.blogspot.com/
Active, paper-based, microfluidic chips driven by electrowetting are fabricated and demonstrated for reagent transport and mixing. Instead of using the passive capillary force on the pulp to actuate a flow of a liquid, a group of digital drops are transported along programmed trajectories above the electrodes printed on low-cost paper, which should allow point-of-care production and diagnostic activities in the future.
Department of Chemistry and Institute of Biological Interfaces, Sogang University, Korea
