Manufacturer of Energy Storage Wax Series to Bulgaria Manufacturers
Short Description:
Product Detail
Product Tags
Manufacturer of Energy Storage Wax Series to Bulgaria Manufacturers Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
We take the wax’s advantage characteristic which can absorb and release thermal energy in the solid-liquid transformation process to store the transferred energy to achieve making use of the most of rich energy resource. Recently years, the new technique has been researched and developed in many fields all over the world, such as new building material, textile industry, electric power, medical device, aviation and space. Some of projects have already stepped into a practical and commercial stage
To conform to market requirement, we have a very good cooperation with some Chinese famous Universities, Scientific Institutions & enterprises to develop and research in energy storage wax.. Some projects have already stepped into a practical stage
|
Name |
Model |
Melt Point |
Mechanical Impurities (%) |
Water-Solubility Acid and Alkali |
Appearance |
|
Energy Storage Wax |
E20 |
20 |
Non |
Non |
White-Yellowy Liquid |
|
Energy Storage Wax |
E21 |
25 |
Non |
Non |
White-Yellowy Liquid |
|
Energy Storage Wax |
E22 |
30 |
Non |
Non |
White-Yellowy Liquid |
|
Energy Storage Wax |
E23 |
35 |
Non |
Non |
White-Yellowy Liquid |
|
Energy Storage Wax |
E24 |
40 |
Non |
Non |
White-Yellowy Solid |
|
Energy Storage Wax |
E25 |
45 |
Non |
Non |
White-Yellowy Solid |
|
Energy Storage Wax |
E26 |
50 |
Non |
Non |
White-Yellowy Solid |
|
Energy Storage Wax |
E27 |
80 |
Non |
Non |
White |
Product detail pictures:
Reliable quality and good credit standing are our principles, which will help us at a top-ranking position. Adhering to the tenet of "quality first, customer supreme" for Manufacturer of Energy Storage Wax Series to Bulgaria Manufacturers, The product will supply to all over the world, such as: South Korea , Poland , Moscow , In the increasingly competitive market, With sincere service high quality products and well-deserved reputation, we always offer customers support on products and techniques to achieve long-term cooperation. Living by quality, development by credit is our eternal pursuit, We firmly believe that after your visit we will become long-term partners.
In this video we show How to replace the oxygen (O2) sensor also known has Air Fuel Ratio sensor on the Nissan Frontier V6 (3300 – VG33E) engine.Here you will see the difference between Bank #1 (right side)and Bank #2(left side) heated (4-wire) oxygen sensors. Replacing the oxygen sensor every 60-70,000 miles is an effort to help conserve fuel/gasoline.The oxygen sensor are not the only device to harness against waste consumption. The coolant temperature sensor at the thermostat housing reports to the computer, the computer commands the cooling fans through the fuel/relay box. Some model will be equipped with dual cooling fans. One for normal operation is the 1st fan. The 2nd fan is for air condition operation and over-heating conditions. If the Tstat remain stuck “close” the two fan will operate and coolant will overflow in its reserve container. The Tstat ONLY control engine temperature. The fans operation and gauge help radiates any heat or over heating base on ambient air temperature and operator.
The oxygen sensor is a state EPA “enviromental term” all so known has a EGT – exhaust gas temperature sensor sends millivoltage(data) to the ecm – engine control module for fuel injector control and its flow rate(impedeance). The oxygen sensor key roll is to measure the combustion flame/temperature .the ideal temperature for anything above 75% throttle is .870mv – .900mv output at the exhaust gas temperature/oxygen sensor. The oxygen(o2) sensor also work in conjuction with the Mass Air Flow Meter/sensor for fuel injector control. So the oxygen sensor can also be conside a Air Fuel Ratio sensor and the Mass Air Flow meter is mounted on the intake manifold duct.
M18 sensors – Install finger tight then 1/2 – 3/4 turn with wrench/ O2 sensor socket.26-33ft. lbs
M12 sensors – Install finger tight then 3/4 – 1 turn with wrench / O2 sensor socket.13.2-17ft. lbs.
APPLICATION: 2003 NISSAN FRONTIER EX, Xterra
3300 CC ENGINE 4X4
PLEASE – RATE – COMMENT AND SUBSCRIBE.
* DO NOT drop or use an oxygen sensor that has been dropped as this may have caused shock damage to the ceramic cell.
* DO NOT use any compound on or around the sensor unless labeled as oxygen sensor friendly products.
* DO NOT use impact wrench or conventional socket type wrench to install sensor.
* DO NOT allow sensor or lead wire to touch exhaust manifold or any other hot component.
* DO NOT expose this product to water,oil,windshield cleaner, anti-corrosion oil,grease,terminal cleaner, etc.
* DO NOT use leaded fuels, silicone or metal based additives
* DO NOT store under high humidity conditions will promote rusting.
WARNING : Anti-seize compound may cause irritation to the skin or eyes. In case of contact, wash affected area with soap and water. In case of eye contact, Flush with water for 15 minutes. If irritation persists, consult a physician. If swallowed, DO NOT induce vomiting.
KEEP OUT OF REACH OF CHILDREN.
