New Delivery for TU-1H01 thermal wax actuator for industrial thermostatic water regulations mixing valve for Borussia Dortmund Factory

New Delivery for
 TU-1H01 thermal wax actuator for industrial thermostatic water regulations mixing valve for Borussia Dortmund Factory

Short Description:

Product Detail

Product Tags

Innovation, quality and reliability are the core values of our company. These principles today more than ever form the basis of our success as an internationally active mid-size company for Wholesale Paraffin Wax Suppliers , Air Compressor Parts , Radiator Valve Temperature Control , Standing still today and searching into the long run, we sincerely welcome shoppers all around the globe to cooperate with us.
New Delivery for TU-1H01 thermal wax actuator for industrial thermostatic water regulations mixing valve for Borussia Dortmund Factory Detail:

1. Operation Principle

The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.

2. Characteristic

(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.

(2)Temperature control is reliable and nicety

(3)No shaking and tranquilization in working condition.

(4)The element doesn’t need special maintenance.

(5)Working life is long.

3.Main Technical Parameters

(1)Handspike’s height may be confirmed by drawing and technical parameters

(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.

(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.

(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.

(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.

Product detail pictures:

New Delivery for
 TU-1H01 thermal wax actuator for industrial thermostatic water regulations mixing valve for Borussia Dortmund Factory detail pictures

We've got a specialist, effectiveness staff to supply high quality service for our shopper. We always follow the tenet of customer-oriented, details-focused for New Delivery for TU-1H01 thermal wax actuator for industrial thermostatic water regulations mixing valve for Borussia Dortmund Factory, The product will supply to all over the world, such as: Malaysia , Swiss , Oman , We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.

  • New diaphragm valve from Georg Fischer Piping Systems

    Twice the flow with optimized flow contours
    The new diaphragm valves have decisive advantages in handling and safety, as well as efficiency. The flow in these new valves is twice that of conventional diaphragm valves. In addition, the central plastic thread, which is used in place of the usual four metal screws, guarantees a corrosion-resistant connection.

    Not apparent at first glance, but equally important is the more homogenous thermal expansion behavior achieved by the central plastic thread, which eliminates the need for retightening the valve body. The central thread ensures a consistent seat pressure, guaranteeing leak-tightness up to an operating pressure of 16 bar.

    New flow contour of the diaphragm valves
    The real technological advances of the new generation of diaphragm valves are actually located on the inside. Thanks to the optimized, turbulence-free flow contour the KV value has been doubled. The rounded contours with soft transitions and radii
    mean less abrasion and noise transmission, which adds comfort to daily use. The modified geometry of the valve body results in linear control characteristics — and therefore also consistently stable processes.

    How the design affects the flow rate of the diaphragm valves can be seen in an independent comparison in which the new diaphragm valves from GF Piping Systems were tested against conventional diaphragm valves. 100% more flow was achieved on average with the optimized, turbulence-free flow contour. And this of course contributes to the economic efficiency of the diaphragm valves with lower running costs and the lower overall cost for media transport.

    Material diversity and guaranteed compatibility
    A large variety of materials warrant that the valves are compatible with the processes they are used in, thus ensuring safety. Valve bodies can be made of PVC-U, PVC-C, ABS as well as PP-H, PP-n and PVDF, membranes of EPDM, PTFE, FPM and NBR. This range of materials covers nearly the entire spectrum of chemicals with which the diaphragm valves can come into contact. So it makes no difference what type of media needs to be conveyed: From extremely contaminated or solid-containing to highly pure media, from the chemical process industry to microelectronics or water treatment, from cooling to control applications, everything is now possible. The large diversity of connection options means that the valves can be used universally. Compatibility to the global standards for connections, e.g. ISO, BS,
    ASTM, ANSI and JIS, as well as to prEN ISO 16138, ISO9393 or EN558 standards have all been taken into consideration. Outer dimensions and connecting dimensions have not been changed from the preceding models. All the new valves are therefore backward compatible and can be built into existing pipelines.

    Design diversity
    Standard versions of the diaphragm valves are operated manually via an integrated lockable handwheel, which protects against inadvertent manipulation. An optional self-adjusting electrical feedback unit, installed in just a few simple steps, enables automatic control and regulation of piping systems, as well as reliable process monitoring.
    Automation of the valves is possible with the Diastar pneumatic valve actuator. Thanks to the three different pressure categories — up to 6 bar, up to 10 bar and up 3/3 to 16 bar — the pneumatically actuated diaphragm valves are quickly and easily integrated into nearly all piping systems. Integrating the valves into system control is no problem with the corresponding interfaces and the wide array of accessories, so individual solutions are always possible.

    For more information visit our website:



    Jaap den Toonder, Femke Bos, Dick Broer, Laura Filippini, Murray Gillies, Judith de Goede, Titie Mol, Mireille Reijme, Wim Talen, Hans Wilderbeek, Vinayak …

    Send your message to us:

    • * CAPTCHA: Please select the House

    Related Products

    • * CAPTCHA: Please select the Cup

    WhatsApp Online Chat !