OEM Factory for TU-1F90 thermal wax actuator for automobile engine thermostat manufacturers Wholesale to Iceland

OEM Factory for
 TU-1F90 thermal wax actuator for automobile engine thermostat manufacturers Wholesale to Iceland

Short Description:

Product Detail

Product Tags

We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Building Automation Temperature Control , Sensing Wax For Sale , Wax Element , We have been sincerely looking forward to developing very good cooperative relationships with buyers from at home and abroad for creating a vibrant foreseeable future together.
OEM Factory for TU-1F90 thermal wax actuator for automobile engine thermostat manufacturers Wholesale to Iceland Detail:

1. Operation Principle

The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.

2. Characteristic

(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.

(2)Temperature control is reliable and nicety

(3)No shaking and tranquilization in working condition.

(4)The element doesn’t need special maintenance.

(5)Working life is long.

3.Main Technical Parameters

(1)Handspike’s height may be confirmed by drawing and technical parameters

(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.

(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.

(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.

(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.


Product detail pictures:

OEM Factory for
 TU-1F90 thermal wax actuator for automobile engine thermostat manufacturers Wholesale to Iceland detail pictures


No matter new consumer or outdated shopper, We believe in lengthy expression and trusted relationship for OEM Factory for TU-1F90 thermal wax actuator for automobile engine thermostat manufacturers Wholesale to Iceland, The product will supply to all over the world, such as: UK , Japan , US , Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.



  • The circuit has the ability to turn on the fan when it senses exessive temperature on the cabinet and turns off autmatically when temperature goes down.



    We show how to purify aluminum nitrate and strontium nitrate by recrystallization. This is important because those two substances must be extremely pure for our upcoming video on making glow in the dark powder.

    First make aluminum nitrate from our previous video: http://www.youtube.com/watch?v=u4Ha1SJrazY

    Dissolve the dry aluminum nitrate in water and filter off any insoluble materials. We could not filter it off before it dried in the previous video because the particles at that stage are much too small. It needs crystallize once to aggregate into particles large that can be filtered.

    After filtering, dry off the aluminum nitrate. The desiccator bag might be useful here: http://www.youtube.com/watch?v=XJFfS_YbbYI

    After drying, carefully weigh out the crystals. Then take that mass and add in 20% mass of water. So if you have 50g like me, you add 10g of water (or 10mL since density is 1g/mL).

    It won’t all dissolve, so carefully heat the mixture until it dissolves. Then cover it and let it cool down. Eventually it’ll crystallize out purer crystals.

    After the mixture cools to room temperature, and left for a few hours. The liquid is poured off and discarded, it has the impurities and is not needed.

    The crystals are again weighed and once again they are recrystallized with 20% water.

    Once this is done. Dry the final product. I started with 50g and ended up with 17g. But now it’s very pure. Better than 99%

    Strontium nitrate also needs to be purified. But it’s solubility doesn’t change that much with temperature so we’ll have to purify by slow evaporation recrystallization rather than thermal cycle recrystallization.

    First, make strontium nitrate like our previous video: http://www.youtube.com/watch?v=_rd8b6wNnKA

    Once again, dissolve it in water and filter it. Then let it crystallize. But before it dries completely, let the liquid reduce to about 20% of it’s saturated volume. So I started with a saturated solution of 10mL of strontium nitrate, i then waited until it evaporated down to 2mL of fluid. The crystals are not included in this assessment. Then discard the liquid. Repeat the recrystallization process.

    Once again, use the desiccator bag to obtain extremely dry chemicals.

    We are now ready to produce glow-in-the-dark powder.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    WhatsApp Online Chat !