OEM Manufacturer Special Wax in Agriculture and Forestry for Puerto Rico Importers
Short Description:
Product Detail
Product Tags
OEM Manufacturer Special Wax in Agriculture and Forestry for Puerto Rico Importers Detail:
(1)YNE4 Series Special Molding Moisturized Wax for Fruit Trees
In order to protect fruit trees and shrubs from desiccation during winter dormancy or transportation or to keep moisture in summer drought, Special Molding Moisturized Wax is spayed on the surface of trees, forming the protecting film in surface of trees. The film has some adequate micro pore that could efficiently reduce the losses of moisture in the surface of the trees, and it simultaneously ensures physiological respiration of the trees.
(2) YNE5 Series Special Preventing Frostbite Wax for Trees
(3) In large northern areas of our country, the winter season is severe cold and the spring season is more heavy windy.
The early winter and the late spring’s frost are quite disadvantage to young plant, the weather is particularly abnormal coldness after spring comes, and frequently injures these trees. As a result young plant is cold death. YNE5 Series Special Preventing Frostbite Wax for Trees not only has anti-freezing effect on trees but also well effect on anti-sprouting etc. Spraying on branches and leaves of trees can make exuberant growth of foliage.
Product detail pictures:
To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for OEM Manufacturer Special Wax in Agriculture and Forestry for Puerto Rico Importers, The product will supply to all over the world, such as: Ukraine , Philadelphia , Montpellier , Our mission is "Provide Products with Reliable Quality and Reasonable Prices". We welcome customers from every corner of the world to contact us for future business relationships and achieving mutual success!
RF-204 is a 4 channel remote control board which come with one remote already programmed
This is an update (Part 3/3) on my Koi Pond Air Lift Vacuum.
Jump To:
See First (Part 1/3) Video Here: https://www.youtube.com/watch?v=nhxTqjnOWSw
See Second (Part 2/3) Video Here: https://www.youtube.com/watch?v=lpfmmRigW8w
I made a Pond Vacuum for less than $20.00 with parts that I purchased from Lows. This is the second update video on the airlift pond vacuum. I believe that once I have this perfected I will be able to air lift nearly all of the debris from the bottom of my Koi Pond and catch it in a filter bag, returning the water back into my pond, and removing the waste in a bag for composting. As you can see in the video, I man need to look at other options for a filter media.
This is a DIY pond vacuum that anybody can quickly build as a day project as this first air lift vacuum took me less than 1 hour to put together from start to finish.
It works very similar to how an air lift pond pump works however it’s portable, easily mobile, and quite easy to use. 
The most recent modifications that I made changed this from a low pressure, high volume airlift to a higher pressure, lower volume airlift with more of a jet action rather than a bubble action.
Today I demonstrate that I can air lift the water 8 to 10 inches from the top of the water. On a previous day, I measured a rate of approximately 12 gpm (Gallons Per Minute) using the current design. I believe that I can gain an even better performance than I currently have with a complete redesign (smaller lift pipe more air jet action).
Pain Strainer Used: https://www.lowes.com/pd_126394-968-11583/12FF_0__?productId=1008387&Ntt=paint+strainer&pl=1¤tURL=%3FNtt%3Dpaint%2Bstrainer&facetInfo=
I’m also going to thoroughly read through this Theses project (Performance Characteristics of Airlift Pumps with Vortex Induced by Tangential Fluid Injection) before I build/rebuild this vacuum again as I think this will help me to cut my experimentation time down quite a bit. https://digitalcommons.bucknell.edu/cgi/viewcontent.cgi?article=1027&context=honors_theses
All-in-all, I’m very happy with the performance of this DIY Air Lift Pond Vacuum and will continue to use this as an alternative to the high cost of commercially available pond vacuums on the market today.
More Ideas Coming Soon…Subscribe to stay tuned!
