OEM/ODM Manufacturer TU-1J04 thermal wax actuator for electric switch valve for Canada Manufacturer
Short Description:
Product Detail
Product Tags
OEM/ODM Manufacturer TU-1J04 thermal wax actuator for electric switch valve for Canada Manufacturer Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
To create extra value for customers is our enterprise philosophy; buyer growing is our working chase for OEM/ODM Manufacturer TU-1J04 thermal wax actuator for electric switch valve for Canada Manufacturer, The product will supply to all over the world, such as: Swansea , Sheffield , Belarus , Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. Faster delivery time and the product you want is our Criterion .
Once the UDS reaches the pre-set temperature the blower turns off. The blower turns back on when temperature drops by a few degrees, then turns off once the temp goes up again just like a thermostat although much more sensitive. This cylic on/off switching of the blower serves to regulate the temperature inside the drum to within +/-3 deg-F for hours on end, as long as there’s enough charcoal in the fire basket. A temperature probe goes through the side of the drum and serves to sample the actual temperature inside drum.
An alarm sounds off once the temperature drops by about 20 deg-F from the set point and this prompts me to add more charcoal. The set point for the alarm automatically follows the temp setting on the knob; there’s no knob for the alarm set point. Now I can sleep without worrying about my cooking. 
The analog meter serves as a rough (un-calibrated) indication of the UDS temperature. I put it there cuz I had one lying around. Not really happy with it cuz I get more resolution from my digital thermometer.
Analog electronics reside inside the small black box. The temperature can be set anywhere from 180 deg-F to 300 deg-F by turning a knob. LED indicators for power and blower on. Alarm enable/disable switch. The black box is magnetically-mounted to the side of the drum for quick & easy mounting & de-mounting (no screws). Power is supplied by either a wallwart or a 12v battery and the unit is reverse-polarity protected, less than 2 watts power consumption.
after I installed this controller I never have thick dark smoke coming out of my UDS anymore and the temperature is REALLY constant now. No more guesswork and tweaking of the air vent holes which take a long time to figure out and varies with ambient temperature.
If you would like to order please see my ad here: https://www.sulit.com.ph/index.php/view+classifieds/id/16394529/Temperature+Controller+for+Charcoal+Fired+Ovens+and+Smokers?event=Search+Ranking,Position,1-1,1
Future aircraft will contain active flow control technology with the objective to improve the flow over the surface of wings, and so to decrease the fuel consumption.
Large benefits are expected from the installation of pulsed jet actuators in Fowler flaps at the rear side. These actuators require transport of pressurised air and electricity from the fixed wing box to the movable flap.
In co-operation with GKN Fokker and Twente University a flexible arm has been developed that can be used for the transition of robust flexible cables (for providing power and control data to actuators as well as transmitting sensor data) and tubing (for providing air pressure to fluidic actuators) between the fixed part of the aircraft and the movable part. This wing movable transition is demonstrated as part of the Integrated Active Component Demonstrator.
This demonstrator has also been used to verify installation of compact cabling, and an Electro-Mechanical Actuator for driving the flap.
The research has been carried out in the context of EU’s Clean Sky programme, theme ‘Advances in Wings, Aerodynamics and Flight Dynamics’, subject ‘Smart Fixed Wing Aircraft’.
