Online Exporter TU-1H01 thermal wax actuator for industrial thermostatic water regulations mixing valve for Germany Importers
Short Description:
Product Detail
Product Tags
Online Exporter TU-1H01 thermal wax actuator for industrial thermostatic water regulations mixing valve for Germany Importers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Well-run devices, expert profits group, and better after-sales companies; We have been also a unified huge family, everybody keep on with the organization worth "unification, determination, tolerance" for Online Exporter TU-1H01 thermal wax actuator for industrial thermostatic water regulations mixing valve for Germany Importers, The product will supply to all over the world, such as: Guinea , European , Romania , We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
https://www.plumberx.com
In this video we start by removing the old two handle tub and shower valve from inside the wall. First we remove the handles and spout leaving the shower head in place to hold up the old shower valve and keeping it there until the new shower valve is in place this makes it easy and keeps use inline with the new installation and makes it very easy to line up the new shower head. Now that we have the handle off its time to go around on the back side and cut into the wall or if were lucky there just may be a trap door on the back side that gives us access to the tub and shower valve from the back side. Once on the back side of the tub and shower valve we start by disconnecting the unions on the old two handle tub and shower valve. Now the part that goes up to the shower head is copper. What we are going to do here is take our torch and heat the solder connection and pull the valve loose from the shower head riser pipe. Now with the old tub and shower valve out the way lets go back to the front side in the bath room. Now this was a three handle tub and shower valve so were going to have to make some adjustments to the hole in the wall in this case we will have to open the middle hole a little wider for the new single handle tub and shower valve. This is not your standard drywall (sheetrock) wall this is old and very thick no cutting this with a saw saw. What were going to do here is use a hammer and just lightly knock out pieces of the wall slow and easy. Don’t worry about covering up the old holes they make a cover plate for that. We have the hole just how we won’t it lets go back to the other side behind the tub and shower. What I like to do is put my new tub and shower valve to gather and solder pieces in place before I start working in the wall with it and I also remove the washers in the valve so we don’t damage the washers with the hot torch and burn them up once all this is done I take the tub and shower valve and put it into place line it up and make all the necessary connections from the back side from here I go back to the front of the valve in that bath room and start putting all the trim on but installing the cover plate first then if you like caulk it. Thank you for watching coolplumbingvideos.
Equipment
1. The product line is suitable for non-carbonated beverages, wine, red wine, red bayberry wine, enzymes and other liquid materials, washing, filling, sealing, plastic caps shrink, labeling, marking and other technology production line;
2. Using air wash bottle (sterile air compressor optional), will automatically flip to the mouth of the bottle down, resulting in a high pressure gas through a sterile air compressor, high-pressure inner and outer walls of the bottle blow the dust outside the bottle to clean, Compared with the traditional washing, avoiding the washing residues cause secondary pollution, while reducing the cost of the back-end high-temperature drying;
3, using high-temperature tunnel sterilization of the bottle;
4, the use of ultraviolet disinfection and sterilization of the bottles for secondary cooling cooling cushion;
5, using vacuum filling corking machine (with automatic stopper, T-plug), make sure the filling level to achieve unity ,, filling and sealing in a clean space, the whole food-grade stainless steel, in contact with the material portion 316 stainless steel, high temperature, acid corrosion, in line with food hygiene standards.
6, automatic round bottle positioning sticker labeling machines, automatic labeling function with online;
7, using online plastic caps shrink machine, plastic cap with online systolic function;
8, using online ink inkjet machine (optional laser standard machine) Online Coding;
The machine’s unique advantages:
1. Advanced intelligent operating system
Automatic filling corking two-line (and material contact parts of stainless steel 316)
Level Associate: bottle filling level does not vary with changes in capacity, the filling level is consistent.
Does not drip: broken, leaking bottles and no bottle automatic no irrigation, no spill liquid
Do not break the bottle: elastic prop the bottle unit, bottle height error automatic adaptation, soft start, soft braking, no rigid impact, not broken bottle hurt machine.
Filling the first to introduce foreign technology, the use of negative pressure type allelic filling valve guide into the bottle good, quasi-liquid filling fast, the product is better than the industry standard.
Bottle feeding process flexible and overload protection to prevent damage by broken bottles machine.
Bottle corking machine according to height, adjust the corking height, wide range bottle height.
Into the bottle, tamponade process flexible and overload protection prevents damage broken bottles machine
Not into the bottle, no less than cork, prevent waste plug.
2. Automatic plastic cap shrinker
Motor speed stepless adjustable, round heater, compact, low power consumption, microcomputer temperature control.
Using specially developed plastic cap heat faint, anti-scald design, convenient low heating temperature adjustable ring heating, uniform shrinkage, posted real smooth, wrinkle-free appearance.
3. Wide range of applications, easy to adjust
For most bottle, replace the bottle only change dial to adjust the height of the can;
4. Closing the filling process, pollution
Filling machine is fully enclosed, in line with the requirements of national health standards, to health, to reduce secondary pollution.
5. The use of multiple sterilization process, the bottle thoroughly sterilized to prevent virus infection;
Workflow: Artificial feeding bottle — Auto Flip sterile gas bottle temperature sterilization tunnel — — UV scrapping cooling buffer platform —- automatic vacuum filling corking two-line (T-type plug) – - – automatic labeling (paste, stickers, hot melt adhesive optional) – Online artificial sets of plastic cap — automatic on-line plastic cap shrink – - Coding (ink, laser optional) – - enter the packing process (with optional automatic box, automatic packing, automatic sealing machine and cuff systolic function)
Main technical parameters:
Power supply voltage: AC220V / 380V 50 / 60HZ
Power: ≤20-30KW
Air pressure: 0.7Mpa
Use pressure: 0.4-0.8Mpa
Bottle-shaped bottle: bottles and corks provided by Guichang
Production capacity: 2600-3000 bottles / hour (500ML dollars)
Filling accuracy: ± 1% (and filling materials and filling volume related)
Dimensions (whole line approximately): 26000 × 3000 × 2150mm
Weight: about 4000-5000kg
More infor please contact us:
Tel:+008613717121005 (Coco Kuang lady)
Email:coco.kuang@conansautomation.com
WhatsAPP:+8613510621902
WeChat:1055694183
Skype:2792094294@qq.com
