Online Manufacturer for Thermostatic Wax Series to Slovenia Manufacturers
Short Description:
Product Detail
Product Tags
Online Manufacturer for Thermostatic Wax Series to Slovenia Manufacturers Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility Acid and Alkali |
Mechanical Impurity |
||
|
B100 |
Powder, Slice , Column |
90/100 |
≥10 |
Non. |
Non. |
|
B105 |
Powder, Slice , Column |
95/105 |
≥10 |
Non. |
Non. |
|
B110 |
Powder, Slice , Column |
100/110 |
≥10 |
Non. |
Non. |
|
B115 |
Powder, Slice , Column |
105/115 |
≥10 |
Non. |
Non. |
|
B120 |
Powder, Slice , Column |
110/120 |
≥10 |
Non. |
Non. |
|
B125 |
Powder, Slice , Column |
115/125 |
≥10 |
Non. |
Non. |
|
B130 |
Powder, Slice , Column |
120/130 |
≥10 |
Non. |
Non. |
|
B135 |
Powder, Slice , Column |
125/135 |
≥10 |
Non. |
Non. |
|
B140 |
Powder, Slice , Column |
130/140 |
≥10 |
Non. |
Non. |
|
B145 |
Powder, Slice , Column |
135/145 |
≥10 |
Non. |
Non. |
|
B150 |
Powder, Slice , Column |
140/150 |
≥10 |
Non. |
Non. |
|
B155 |
Powder, Slice , Column |
145/155 |
≥10 |
Non. |
Non. |
|
B160 |
Powder, Slice , Column |
150/160 |
≥10 |
Non. |
Non. |
|
B165 |
Powder, Slice , Column |
155/165 |
≥10 |
Non. |
Non. |
|
B170 |
Powder, Slice , Column |
160/170 |
≥10 |
Non. |
Non. |
|
B175 |
Powder, Slice , Column |
165/175 |
≥10 |
Non. |
Non. |
|
B180 |
Powder, Slice , Column |
170/180 |
≥10 |
Non. |
Non |
Product detail pictures:
Our focus on should be to consolidate and enhance the quality and repair of present products, in the meantime constantly establish new products to meet unique customers' requires for Online Manufacturer for Thermostatic Wax Series to Slovenia Manufacturers, The product will supply to all over the world, such as: Guyana , Georgia , Algeria , Meanwhile, we're building up and consummating triangle market & strategic cooperation in order to achieve a multi-win trade supply chain to expand our market vertically and horizontally for a brighter prospects. development. Our philosophy is to create cost-effective products, promote perfect services, cooperate for long-term and mutual benefits, firm a comprehensive mode of excellent suppliers system and marketing agents, brand strategic cooperation sales system.
Fragen an: kuck_der_hueb@web.de oder aufhttps://turbo-sprayer.de.tl/TFSI-TSI-EINLASS-VENTILE-REINIGEN-BeDi-valve-cleaning.htm
Die Reinigung (decarbonising) von verkokten Einlassventilen und Drosselklappen (hier beim 2.0 TFSI EA 113) Direkteinpritzer erfolgt mittels Hochdruckpumpe mit spezieller Einspritzdüse und Liqui Moly Ventil Reiniger.
Dazu wird ein Reinigungsgemisch ca. (75ml Liqui Moly / 400ml Benzin) in mehreren Druchgängen direkt in die Ansaugbrücke eingesprüht.
Dadurch werden Verkokungen und Ablagerungen schonend gelöst und mit verbrannt.
Warum verschmutzen Direkteinspritzermotoren?
Bei allen Fuel Direct injection / FSI und TFSI von Audi (R4 V8 V10), VW, Opel Turbo, BMW 335i, Porsche usw. gelangen Öldämpfe und Blow By Gase durch die Kurbelgehäuseentlüftung (KGE) und die Ventilüberschneidung / internes AGR in den Ansaugtrakt.
Dadurch lagert sich einiges an Ölschlam an den Ventilen und der Drosselklappe ab, welcher dort mit der Zeit verkoken und Leistungsverlust, sowie unrunden Leerlauf verursachen wird.
Die Verbrennungsrückstände an Drosselklappe und den Ventilen führt zu vermindertem Durchlass, Mehrverbrauch, unrundem Leerlauf und erhöhten Verschleiß der Ventile / Schäfte.
Ihr solltet eine Reinigung der Venitle / Drosselklappe, präventiv alle 20-30 TKm druchführen.
Firmen wie BEDI; Lambda und Tunap lassen sich genau diese Reinigung fürstlich bezahlen. Dann lieber selber machen….
!Wichtig!
Nur Liqui Moly, Lamda Reiniger oder Tunap Produkete benutzen. Bitte kein Seafoam oder ähnliches Zeug verwenden!!!
INSTRUCTIONS: The cleaning of the intake valves / throttle the 2.0 TFSI (EA 113) Direkteinpritzer by means of a high pressure pump with special Liqui Moly injector and valve cleaner. For this, a cleaning mixture (LM / petrol) is sprayed into several Druchgängen directly into the intake manifold. Thus, the deposits are gently released and burned.
Why pollute direct-injection?
For all direct fuel injection / FSI and TFSI Audi VW VAG etc. (also my Cupra R;-)) are deposited by oil fumes / blow-by gas contamination on the valves and the throttle valve, which carbonize there with time.
This is a design related problem of direct injection, because the valves are not lapped by gasoline and the crankcase ventilation is initiated directly in front of the cylinder head.
The combustion residue on the valve and the valves leading to reduced transmission, consumption, irregular idling and increased wear of valves / stems.
For heavy soiling of the valves no longer close them from close and overheating and engine damage by burning the valves / seat rings are the result.
I unfortunately can not make recordings endoscope, as this is only due to see, but can say that cleaning is clearly visible, which is also confirmed by the idle fuel consumption.
You should druchführen every 20-30 TKm cleaning the Venitle / throttle. Companies like BEDI; lambda and Tunap can be exactly this purification pay handsomely. Better to do it yourself ….
https://www.printermaker.com
LC Printing Machine Factory Limited
Price Terms︰ FOB GuangZhou
Payment Terms︰ T/T LC
Packing︰ Wooden case
Lead Time︰ Within 5 days
Standards Certificate︰ ISO9001-2000
Power Supply︰ 220V/110V/50HZ/60HZ-1 Phase
Colour Painted ︰ White
Specifications︰ LC-HST-200
1.Size of Hot Plate :150×200 mm
2. Work Table Size :320 ×400 mm
3.Max. Pressure :4000Kg
4.Max. Head Stroke :40mm
5.Heater Capacity: 1200 W
6. Foil Controller :motor Controller
7. Temperature adjustment :0-300oC
8. Net Weight :118 Kg
9. Dimension : 650 x 650 x 900 mm
LC-HST-290
1.Size of Hot Plate :210×290 mm
2. Work Table Size :320 ×400 mm
3.Max. Pressure :4000Kg
4.Max. Head Stroke :40mm
5.Heater Capacity: 1200 W
6. Foil Controller :motor Controller
7. Temperature adjustment :0-300oC
8. Net Weight :118 Kg
9. Dimension : 650 x 650 x 900 mm
LC-HST-270
1.Size of Hot Plate :190×270 mm
2. Work Table Size :320 ×400 mm
3.Max. Pressure :4000Kg
4.Max. Head Stroke :40mm
5.Heater Capacity: 1200 W
6. Foil Controller :motor Controller
7. Temperature adjustment :0-300oC
8. Net Weight :118 Kg
9. Dimension : 650 x 650 x 900 mm
LC-HST-250
1.Size of Hot Plate :300×250 mm
2. Work Table Size :320 ×400 mm
3.Max. Pressure :4000Kg
4.Max. Head Stroke :40mm
5.Heater Capacity: 1200 W
6. Foil Controller :motor Controller
7. Temperature adjustment :0-300oC
8. Net Weight :118 Kg
9. Dimension : 650 x 650 x 900 mm
Advantages︰ 1.Minimum air consumption;
2.Capable of adjusting the stamping pressure, the temperature and the speed;
3.Worktable capable of slight adjustment to rear-and-front, left-and-right and rotation;
4.The height of the stamping head adjustable accordingly;
5.Automatic foil feeding and rolling with adjustable function;
Machine Fittings︰ 1. Silicon rubber Edition one pic;
2. High temperature Paper one inch；
3. Stamping foil one roller；
4. One set tool；
5. Spring 2 Pcs;
6. AC contactor 1 pc;
7. Rubber Ring 1 pc;
8. Thermocouple 1 pc;
9. Limit Switch 1 pc;
10. Heater tube 2 pcs.
Package List︰ Package list: 750 x 670 x 960 mm
Gross weight: 150kg.
Ship Date︰ Ship on aboard within 5 days after TT
Any china city delivery within 10 days.
Wooden case package.
Testing︰ 220V power supply;
Stamping foil suited for objects;
Flat or edition stamping plate;
Fixture for objects to be stamped.
