Short Lead Time for TU-1J02 thermal wax actuator for electric switch valve to Latvia Factories
Short Description:
Product Detail
Product Tags
Short Lead Time for TU-1J02 thermal wax actuator for electric switch valve to Latvia Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We offer great strength in quality and development,merchandising,sales and marketing and operation for Short Lead Time for TU-1J02 thermal wax actuator for electric switch valve to Latvia Factories, The product will supply to all over the world, such as: UAE , Guatemala , Bulgaria , Our solutions have national accreditation requirements for qualified, good quality products, affordable value, was welcomed by individuals all over the world. Our products will continue to improve inside the order and appear forward to cooperation with you, Definitely should any of those goods be of curiosity to you, be sure to letus know. We'll be satisfied to supply you a quotation up on receipt of the detailed needs.
3D linear actuator construction before simulation in Flux® by CEDRAT
150mm Butterfly Valve (6″) Butterfly Valve Table E/PN16 Wafer style, lever operated. Fits between two Table E flanges in a pipeline. A great valve type for flow control and isolation in a pipeline at a lower cost than other valves types on the marker. Available from DEWATER PRODUCTS in Perth, Western Australia, email: sales@dewaterproducts.com.au
DEWATER PRODUCTS is a Perth based pipeline valve supplier, supplying valves not only in Perth and Western Australia but also nationally to all industries. Visit https://dewaterproducts.com.au/
Butterfly Valve a valve which has a disc that swings on a spindle shaft like a butterfly wing hence the name Butterfly Valve. The disc is mounted inside a pipe (valve body) in order to control flow and seal on a lining when closed. Connection varies depending on the valve type and can be wafer between the two pipe flanges, lugged to fasten onto a pipe flange, flanged, threaded and grooved. The Butterfly Valve is commonly opened and closed using a lever handle. In larger sizes above 200mm, then it is more common for a worm gear drive and hand wheel to be installed, as it allows for easier opening and closing for the operator. Larger Valves become harder to close with a lever handle because of the flow and volume of fluid moving in the pipe. The operator will find it much easier using a hand wheel, with geared reduction. Another common way for a butterfly valve to be opened and closed is with an Actuator. Actuators can be Pneumatic, Electric or Hydraulic. The cost varies for each type of actuator.
The seal material on butterfly valves are an important element for the correct function of a butterfly valve. The seal needs to withstand any potential damage from heat and chemicals being pumped. There are a range of seal materials available.
Our range of Butterfly Valves are CE approved, ISO approved, API-6D approved.
Dewater Products supply Butterfly Valves in all sizes, types and classes. Please contact us if you require a certain type of Valve.
