Super Purchasing for TU-1F04 thermal wax actuator for air conditioner and compressor for Italy Factories
Short Description:
Product Detail
Product Tags
Super Purchasing for TU-1F04 thermal wax actuator for air conditioner and compressor for Italy Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Sticking to the principle of "Super Quality, Satisfactory service" ,We are striving to be a good business partner of you for Super Purchasing for TU-1F04 thermal wax actuator for air conditioner and compressor for Italy Factories, The product will supply to all over the world, such as: Swansea , Philippines , Sevilla , We insist on the principle of "Credit being primary, Customers being the king and Quality being the best", we are looking forward to the mutual cooperation with all friends at home and abroad and we will create a bright future of business.
Anytime Help this channel to grow by sending your notes to mrzeeshanplus@gmail.com .
(LIKE+SHARE+SUBSCRIBE)
Fuzzy sets
Fuzzy Logic
Chopper controlled DC motor
Slip Power Recovery Drive
Kramer Drive System
Scherbius Drive System
STATIC SYNCHRONOUS SERIES COMPENSATOR (SSSC)
Unified Power Flow Controller (UPFC)
Thyristor Controlled Reactor (TCR)
Thyristor Controlled Series Capacitor (TCSC)
V-I characteristic of STATCOM
Static Synchronous Compensator (STATCOM) and its V-I characteristic
Linux Kernel Architecture
Daisy Chain Arbitration
Processor technology
Application Specific Instruction Set Processor (ASIP)
Single Purpose Processor
General Purpose Processor
EPROM internal structure
Cache Mapping Technique
Flash or Parallel ADC (Analog to Digital Converter)
Electronic Counter
Integrating or Dual Slope ADC
Digital Multimeter (DMM)
HRC (High Rupturing Capacity) fuse
Sampling of Analogue Signals
Programmable Logic Devices (PLD)
Field Programmable Gate Array (FPGA)
Time Domain Reflectometry (TDR)
Spectrum analyzer
Oscilloscope
Stator Voltage Control of three phase induction motor
Types of three phase induction motor rotor
Separately Excited DC motor
Squirrel cage rotor
Speed control of three phase induction motor
AC motor
Field control of DC motor
Armature control of DC motor
Classification of Electrical machine
Saturated Reactor (SR)
Synchronous condenser
Improvement of transient stability using SVC
Single Phase Induction Motor
Induction Motor
Digital to Analog Converter (DAC)
Standard Commands for Programmable Instruments (SCPI)
Liquid Crystal Display (LCD)
Analog to Digital Converter (ADC)
Asymmetric Digital Subscriber Line (ADSL)
Vector control of induction motor
Linear Time Invariant (LTI) System
Digital Signal Processors (DSP)
Data Acquisition System (DAS)
Advantages and Disadvantages of Permanent Magnet Brushless DC (PMBLDC) Motor
Advantages of Variable Frequency Drive (VFD)
Variable Frequency Drive (VFD)
Slip Energy Recovery Scheme for three phase induction motor
Voltage Source Inverter (VSI)
Static Synchronous Compensator (STATCOM)
Reluctance Motor
Unified Power Flow Controller (UPFC)
BLDC MOTOR
SVC
STATCOM vs SVC
Objectives of Shunt Compensation
Thyristor Switched Capacitor
Thyristor Controlled Reactor
Phase Angle Regulator
Principle & Benefits of FACTS
Importance of Reactive Power
Primary and Backup Protection
VISIT WEBSITE – https://eletricalandelectronics.com/
ALL #EEE Videos here –
https://www.youtube.com/playlist?list=PLQLdKyBqWCjo2z2nGrfpc8H37vNK0DDLm
THANKS FOR WATCHING…
The lift function of my bobcat stopped working. The left joystick was blinking 5 blinks on the left LED, and all the service manual said was to replace the AHC actuator. Once I fixed it, the left joystick was blinking 2 blinks on the left joystick and the service manual said to calibrate actuator, which I did to 1.72V, although I didn’t realize this until I was finished making the video. Note that calibration of the actuator means that the actuator is removed from the machine, disassembled and the potentiometer gear rotated so the output voltage reads 1.72V when the actuator is 0.114″ into the end.
Some pictures and video of fixing a bobcat 863F lift tilt actuator with AHC – advanced hand controls. This bobcat has a metal cased AHC controller. The machines with the plastic case may be different. The video also shows how to replace the spool seal on the lift actuator. Note that I was not able to easily slide the spool out of the back of the hydraulic manifold (it was running into a hard hydraulic line), so I only changed the front seal. The rear seal wasn’t leaking, but I’m sure it will start now that I didn’t change it!
The Bobcat AHC actuator part number is 7104842 for the old style AHC controller.
The globe motor part number located inside the actuator is 403A851
The newer actuator part number is 7101672 which is for use in machines that have a plastic AHC controller housing. That actuator sounds like it’s the same, but when assembled they set the position of the linear actuator to be flush with the end of the actuator instead of inset 0.114″ when the potentiometer voltage reads 1.72V (thanks to Ed for this info).
I see that these two types of actuators are used on a number of models:
751,753,763,773,863,864,873,883,T200,864,
A300 S100 S130 S150 S160 S175 S185 S205
S220 S250 S300 S330 S450 S510 S530 S550
S570 S590 S595 S630 S650 S740 S750 S770
S850 T110 T140 T180 T190 T250 T300 T450 T550 T590 T630 T650 T740 T750 T770 T870
