2017 China New Design Thermostatic Wax Series to Australia Importers
Short Description:
Product Detail
Product Tags
2017 China New Design Thermostatic Wax Series to Australia Importers Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility Acid and Alkali |
Mechanical Impurity |
||
|
B100 |
Powder, Slice , Column |
90/100 |
≥10 |
Non. |
Non. |
|
B105 |
Powder, Slice , Column |
95/105 |
≥10 |
Non. |
Non. |
|
B110 |
Powder, Slice , Column |
100/110 |
≥10 |
Non. |
Non. |
|
B115 |
Powder, Slice , Column |
105/115 |
≥10 |
Non. |
Non. |
|
B120 |
Powder, Slice , Column |
110/120 |
≥10 |
Non. |
Non. |
|
B125 |
Powder, Slice , Column |
115/125 |
≥10 |
Non. |
Non. |
|
B130 |
Powder, Slice , Column |
120/130 |
≥10 |
Non. |
Non. |
|
B135 |
Powder, Slice , Column |
125/135 |
≥10 |
Non. |
Non. |
|
B140 |
Powder, Slice , Column |
130/140 |
≥10 |
Non. |
Non. |
|
B145 |
Powder, Slice , Column |
135/145 |
≥10 |
Non. |
Non. |
|
B150 |
Powder, Slice , Column |
140/150 |
≥10 |
Non. |
Non. |
|
B155 |
Powder, Slice , Column |
145/155 |
≥10 |
Non. |
Non. |
|
B160 |
Powder, Slice , Column |
150/160 |
≥10 |
Non. |
Non. |
|
B165 |
Powder, Slice , Column |
155/165 |
≥10 |
Non. |
Non. |
|
B170 |
Powder, Slice , Column |
160/170 |
≥10 |
Non. |
Non. |
|
B175 |
Powder, Slice , Column |
165/175 |
≥10 |
Non. |
Non. |
|
B180 |
Powder, Slice , Column |
170/180 |
≥10 |
Non. |
Non |
Product detail pictures:
We pursue the management tenet of "Quality is superior, Service is supreme, Reputation is first", and will sincerely create and share success with all clients for 2017 China New Design Thermostatic Wax Series to Australia Importers, The product will supply to all over the world, such as: Sweden , Mexico , Rwanda , Our company will adhere to "Quality first, , perfection forever, people-oriented , technology innovation"business philosophy. Hard work to keep making progress, innovation in the industry, make every effort to first-class enterprise. We try our best to build the scientific management model, to learn abundant professional knowledge, to develop advanced production equipment and production process , to create the first-call quality products, reasonable price , high quality of service , quick delivery , to give you create new value .
Piezoelectric materials generate electricity when they are mechanically deformed. In this video we show how this can be used to make a simple circuit that stores the energy in a capacitor and lights a LED.
Capacitor is 20 uF @ 25 volts and resistor is 2.2 k.
https://www.etrailer.com/tv-demo_trailer_hub_magnet_replacement.aspx
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
When one wheel does not seem to be stopping as quick as the others it may be because the brake magnet needs to be replaced. We put together a short video to help you recognize this problem and to show you how easy it is to fix it. Keep your trailer safe for yourself and others on the road by checking and replacing parts like the brake magnet when needed.
What we are going to do is show you a few comparisons here. We took off another hub on the trailer right next to it. What happened was you can see on the hub on the left hand side there are actually rings on where the wheel studs are. It is also supposed to be more a flat finish compared to the new ones on the right hand side there. What happened was the magnet that was designed to wear on the hub has actually been riding on the hub too long when the brakes were not being used. It just happens that way. What happens is it wears down and makes those grooves and makes an uneven finish. What that uneven finish does is make the magnet not work so well. Like in this instance we had 3 wheels that were working great and this one which was not. This one has those grooves in there so that just deteriorates the performance of the brake. There is nothing you can do but replace the hub or find a brake shop that can actually plane that inside of the hub down to make it a flat finish again. It may be hard to find a shop to do that such as in our case. So we are just going to go ahead and replace the the hub with a new one considering that the inside bearing was worn down also. Since the hub is worn down we will have to replace the magnet to match the new flat face thats going to be on there.
To replace our magnet here we have to do a few things. Release the magnet from this arm and cut these wires here. Also get them away from these clips here. Do save the clips because they do not come with the new magnet so you will need them to put it back on. First off we will just clip the wires off here. Next pull these clips off. Then to take the magnet off the arm you have to remove this clip here. The wires go through a fitting that kind of seals it off from the outside. What we need to do is punch that through from the inside. Now we just pass that junction and get some fresh wire. Then leave that alone and install our new magnet. We start off by installing our spring. It kinda just sets there in place. Slide on our new magnet. Make sure our wires are going the right way. It also comes with a new clip here that holds it into place. Lets go ahead and push that in. Might have to tap it on then make sure there is plenty of movement. If yours does not have that much movement maybe clean it up a little bit. Maybe a slight dab of grease but thats a last ditch effort. As long as it moves inside and out like that it will be just fine.
Now what we are going to do is slide our wire clips back on. Then we will poke it through the hole, run it back through the plate here and let that lie. We then put these back where they used to be. Then we will put our little wire fitting back on there. It is kinda hard to tell but what it does is sets it into place and pushed together. Then it comes back through the plate. Once it gets plugged back into place we can redo our connections. Just for reference the magnets do not care about polarity as long as one wire goes to absolute ground and one wire goes to the power. We will go ahead and make some our connections with quick connects. Then our magnet install will be complete. We are using a gel filled quick connect. They work better for outside use. Take those and zip tie them to the back so they will not flop around or anything. Now we can just reinstall our hub.
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
