Wholesale PriceList for Thermostatic Wax Series to Kyrgyzstan Manufacturer
Short Description:
Product Detail
Product Tags
Wholesale PriceList for Thermostatic Wax Series to Kyrgyzstan Manufacturer Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility Acid and Alkali |
Mechanical Impurity |
||
|
B100 |
Powder, Slice , Column |
90/100 |
≥10 |
Non. |
Non. |
|
B105 |
Powder, Slice , Column |
95/105 |
≥10 |
Non. |
Non. |
|
B110 |
Powder, Slice , Column |
100/110 |
≥10 |
Non. |
Non. |
|
B115 |
Powder, Slice , Column |
105/115 |
≥10 |
Non. |
Non. |
|
B120 |
Powder, Slice , Column |
110/120 |
≥10 |
Non. |
Non. |
|
B125 |
Powder, Slice , Column |
115/125 |
≥10 |
Non. |
Non. |
|
B130 |
Powder, Slice , Column |
120/130 |
≥10 |
Non. |
Non. |
|
B135 |
Powder, Slice , Column |
125/135 |
≥10 |
Non. |
Non. |
|
B140 |
Powder, Slice , Column |
130/140 |
≥10 |
Non. |
Non. |
|
B145 |
Powder, Slice , Column |
135/145 |
≥10 |
Non. |
Non. |
|
B150 |
Powder, Slice , Column |
140/150 |
≥10 |
Non. |
Non. |
|
B155 |
Powder, Slice , Column |
145/155 |
≥10 |
Non. |
Non. |
|
B160 |
Powder, Slice , Column |
150/160 |
≥10 |
Non. |
Non. |
|
B165 |
Powder, Slice , Column |
155/165 |
≥10 |
Non. |
Non. |
|
B170 |
Powder, Slice , Column |
160/170 |
≥10 |
Non. |
Non. |
|
B175 |
Powder, Slice , Column |
165/175 |
≥10 |
Non. |
Non. |
|
B180 |
Powder, Slice , Column |
170/180 |
≥10 |
Non. |
Non |
Product detail pictures:
We've numerous great employees customers excellent at promoting, QC, and working with kinds of troublesome difficulty inside the generation method for Wholesale PriceList for Thermostatic Wax Series to Kyrgyzstan Manufacturer, The product will supply to all over the world, such as: Romania , Grenada , Pakistan , we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, now we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.
“For information please visit https://owners.nissanusa.com/nowners/. You will find quick reference guides and other useful information about your warranty, Bluetooth® system, and much more!
This is one of the available climate control panels for your vehicle. If your vehicle is equipped with a different climate control system, see your Owner’s Manual for additional information.
The AUTO mode may be used all year round. The system automatically regulates and maintains fan speed, airflow and temperature in the cabin. To turn the system ON, press the AUTO button. The indicator light turns ON when the system is activated.
Pressing the DEFROST button or changing the fan speed or airflow mode turns off the AUTO function and switches the system to manual control. To reactivate automatic control, press the AUTO button.
To turn the entire climate control system OFF, press the OFF button.
Your vehicle has separate temperature control buttons for the driver and front seat passenger. Turn the driver’s side control knob to the right for warmer or left for a cooler temperature.
If you want to adjust the passenger side temperature independently from the driver’s side, press the DUAL button or turn the temperature control knob left or right. The DUAL control indicator and the passenger’s side temperature will be displayed on the monitor.
If the DUAL mode is not active, the driver’s temperature control buttons set the temperature for both the driver and passenger. To switch back to driver control when the DUAL mode is active, press the DUAL button again.
Press the air flow control button repeatedly to cycle through these four air flow choices:
● Air will flow from center and side vents
● Air will flow from center, and side and foot outlets
● Air will flow mainly from foot outlets
● Air will flow from the defroster and foot outlets The selected air flow mode is displayed on the monitor.
Press the A/C button to manually turn the air conditioning ON or OFF.
Intake air control is automatically regulated in AUTO mode. Press the intake air control button to manually alternate between recirculating inside air and drawing outside air into the cabin. The indicator light on the button will illuminate when the recirculating mode is active.
The air recirculation mode increases air conditioning efficiency and helps block outside odors from entering the cabin.
To return to automatic control of the air intake mode, press and hold the air intake control button for approximately 2 seconds until the indicator light flashes twice.
Use the fan speed control buttons to adjust the fan speed. Press this button to increase fan speed. Press this button to decrease fan speed. When you manually change fan speeds, it turns off the automatic climate control mode. To return to automatic climate control, press the AUTO button.
To defrost or defog the front and side windows, press the DEFROST button. The indicator light will illuminate. Airflow will be directed to the front and side windows.
In the DEFROST mode, the Air Conditioner activates automatically at temperatures above 23 degrees Fahrenheit and the air recirculate mode automatically turns off, allowing outside air to be drawn into the passenger compartment to improve the defogging and deicing performance. For windshield deicing, the temperature and fan speed should be at the highest settings.
To defrost or defog the rear window and the outside mirrors, push the REAR WINDOW DEFROSTER switch. The indicator light will illuminate. After defrosting, push the switch again to turn OFF. If not turned OFF manually, this feature will automatically deactivate after a period of time.
There is a temperature sensor located on top of the dashboard near the windshield that helps regulate the automatic climate control settings. Keep this area clear of papers and other materials.
Please see your Owner’s Manual for important safety information, system limitations and additional operating information.
”
Please contact us for more information:
Ph: +91 9490219339 (WhatsApp/SMS text only Please)
www.sooxma.com
www.mycollegeproject.com
engprojects@gmail.com
Hyderabad, India.
Students will be provided with complete working hardware kit and other related documentation.
We develop customised projects as per your requirements.
We are specialised in developing IoT based industrial projects usinng various sensor like Temperature, Humidity, light, water level, moisture, pressure, fire, flame sensor, air pollution, gas sensors like MQ-02,MQ-03,MQ-06 etc. Alcohol sensrs, LPG gas, LDR sensor, current CT sensor, voltage sensor for solar panels, IR (infrared) sensors, Laser light sensors, Magnetic sensors like hall effect, read switch etc, tilt sensor, sound sensor, heart rate sensor, blood pressure sensor, body temperature sensor, rain water sensor, ultrasonic distance sensor, Thermisters, PIR sensor, MEMS accelerometer sensor, Digital compass, positional sensor, Direction sensors, RTC, EEPROM, iButton reader, piezo sensors, wireless power, Load cell, weight sensors, flex sensors, Flow sensors, Resistive touch screen, APR voice module, Eye blink sensor, DHT11, LM35, Speech recognition, mp3 player, Barcode reader, color sensor, Capacitive touch sensor, energy meter, Matrix keypad, SD card reader, Tachometer (speed sensor), Nextion displays, Fuel sensors, Vibration sensor, LiFi.
Motors we work with:
DC Motor, PMDC motors, Servo Motor, AC Motor, Series motor, Universal motors, stepper motors, geared motors, brush less motors.
We work with following communication devices.
GSM Modem, GPS Receiver, IoT esp8266, RFID readers (Active and Passive), Zigbee, Bluetooth receivers, WiFi transceivers, RS232 communication, RS485, CAN communication, RF Transceiver, RF 433MHz, PLCC (Power line Carrier Communication), barcode reader, finger print reader, smart card reader, USB communication, PS2 communication, DTMF, Ethernet communication,
We work with PIC Microcontrollers (8bit, 16bit, 32 bit), MSP430, PIC 12F, PIC16F, PIC18F, PIC24F, PIC32F series, STM32, Arduino (Pro mini, Nano, Uno etc), AVR, ATMEGA, esp8266, 8051, 80S52, ARM, LPC2148, Raspberry Pi, Orange Pi(Lite,One,Plus etc), Nodemcu, Wemo etc.
WE develop following Hardware(sensors) accessing mechanisms:
Android apps, PC based applications, Web development with IoT, TCP sockets, UDP, http, remote file systems and data loggers.
Domains we work with:
Security, SCADA, wireless, protection, data loggers, control systems, telecommunications, education, transport, agricultural, industrial, building autommation, home automation, access control, IoT with Android apps, solar, non-conventional power generation, medical, Robotics, advertisement displays (scrolling led sign board, P10 displays, 50-50 led sign board, pixel programmable led sign board,
Displays we work with:
Nokia 5110, Propeller display, 16×2 LCD displays, 20×4 displays, scrolling led displays, 128×64 graphical displays, oled (spi,i2c), TFT displays, seven segment displays,
Power electronics and Switching devices:
MOSFET, Transistor, Power Transistor, IGBT, SCR, TRIAC, Relays etc.
We also develop IEEE projects like IEEE-2016, IEEE-2017 Student projects along with modifications.
Biomedical Wearable device for remote monitoring of patients Physiological signal
AIM: The project aims in designing a system which helps in monitoring heartbeat, body temperature on a LCD display and alerts when the body temperature or heart rate is increased/decreased a preset value for elderly people through buzzer. The system also transmits the data to PC using RF transceiver modules. The main aim of this project is to monitor the health condition of the patient using a biomedical wearable device.
Operation: The purpose of this project is to monitor the patient vital signs like temperature, pulse by using a biomedical wearable device, and to inform the concerned doctor whenever there is a change in his health using RF wireless communication.In this project we are measuring the patient vital signs like temperature and heart beat rate by using temperature sensor and heart beat sensor. These values are converted into digital by using Analog to Digital converter and that values are given microcontroller.
1. Continuous monitoring of the heart beat and temperature of the patient.
2. Display the monitored data on LCD.
3. Wireless transmission of data using RF communication.
4. Alerting through buzzer.
