10 Years Manufacturer Thermostatic Wax Series to Argentina Manufacturers
Short Description:
Product Detail
Product Tags
10 Years Manufacturer Thermostatic Wax Series to Argentina Manufacturers Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility Acid and Alkali |
Mechanical Impurity |
B100 |
Powder, Slice , Column |
90/100 |
≥10 |
Non. |
Non. |
B105 |
Powder, Slice , Column |
95/105 |
≥10 |
Non. |
Non. |
B110 |
Powder, Slice , Column |
100/110 |
≥10 |
Non. |
Non. |
B115 |
Powder, Slice , Column |
105/115 |
≥10 |
Non. |
Non. |
B120 |
Powder, Slice , Column |
110/120 |
≥10 |
Non. |
Non. |
B125 |
Powder, Slice , Column |
115/125 |
≥10 |
Non. |
Non. |
B130 |
Powder, Slice , Column |
120/130 |
≥10 |
Non. |
Non. |
B135 |
Powder, Slice , Column |
125/135 |
≥10 |
Non. |
Non. |
B140 |
Powder, Slice , Column |
130/140 |
≥10 |
Non. |
Non. |
B145 |
Powder, Slice , Column |
135/145 |
≥10 |
Non. |
Non. |
B150 |
Powder, Slice , Column |
140/150 |
≥10 |
Non. |
Non. |
B155 |
Powder, Slice , Column |
145/155 |
≥10 |
Non. |
Non. |
B160 |
Powder, Slice , Column |
150/160 |
≥10 |
Non. |
Non. |
B165 |
Powder, Slice , Column |
155/165 |
≥10 |
Non. |
Non. |
B170 |
Powder, Slice , Column |
160/170 |
≥10 |
Non. |
Non. |
B175 |
Powder, Slice , Column |
165/175 |
≥10 |
Non. |
Non. |
B180 |
Powder, Slice , Column |
170/180 |
≥10 |
Non. |
Non |
Product detail pictures:
Fast and good quotations, informed advisers to help you choose the correct product that suits all your needs, a short production time, responsible quality control and different services for paying and shipping affairs for 10 Years Manufacturer Thermostatic Wax Series to Argentina Manufacturers, The product will supply to all over the world, such as: Kenya , St. Petersburg , Morocco , With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in public placesand other industries. Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
Replacing THERMOSTAT and FLUSHING COOLING SYSTEM for the 2003 Nissan VG33E V6 Engine and is a Common procedure for many other automobile make and model. Learn How-To service and Maintain you automobile with easy and saving method. The thermostat is a temperature valve for liquid cooling system. The thermostat open and closes a main passageway to exchange fluid temperature. The flow of the fluid is cause by the water pump and not the thermostat. Failure to replace a thermostat for long term period will result in overheat engine damage or no heat from heater during cold temperature below 32F degrees. Today engine must have a thermostat for the vehicle to pass EPA state emmision gas laws. Failure to use thermostat while cause poor early morning start-up, consume additional fuel during normal driving, engine crankcase develop sludge, fowl spark plugs and damage exhaust catalytic convertor. Failure to use thermostat may cause burst damage to rubber hose and rupture coolant seals.
How to lower engine coolant operation temperature https://www.youtube.com/watch?v=lmP4PM-56eM .
Here is more information from the Nissan Factory shop service manual pretaining to the engine complete cooling system. https://drive.google.com/file/d/0B0LNCvWJP9khYXF4LThXV0QtRGc/view?usp=drivesdk .
The shop service manual also feature more information pretaining to this video. Click on the In-Video Card for more information on how to prevent Engine Overheating.
Thank you. Please stay tune. Like .share .coment and subscribe.
Batching Plant control system ,”
www.malikautomation.com
Contact : info@malikautomation.com
Software Features:
1. Weighing process and parameter will show in 1 display, can be modified Online
2. Fully automatic and semi-auto production, or manual operation.
3. The control system has the function of automatic zero adjusting. It can set zero automatically when hopper has small amount of adhesive.
4. Unlimited formulas can be stored.
5. Fault self-diagnosis and the machinery faults will be displayed on a screen.
6. Manufacturing date will be saved into the computer, easily for print out or search.
7. Our control system is designed with production management function, so a whole year’s production data of this concrete batching plant can be stored. Meanwhile, it is designed with production data search function. Daily reports, monthly reports, and yearly reports can all be printed.
8. The material amount in each silo can be displayed.
9. Automatic weighing error control.
10. No error between external weight indicators and the control system.
11. Double Batch safety
12. Allows system to run with outputs disabled for training and fault finding.
13. The system can be utilized with utmost simplicity by non-qualified personnel.
14. Quicker cut-off response times are the result of our unique “dual processor” design. Jogging of fill gates is virtually eliminated, allowing your ready mix plant to run at full speed. Our proprietary “Intelligent Free-Fall” system keeps track of each material fill and automatically adjusts for cut-off variations.
15. Every concrete batching system includes an integrated Programmable Logic Controller (PLC) that allows every aspect of your plant to be controlled, without adding relays and custom wiring. Custom batching equipment such as material distribution, water reclamation, and silo monitoring can be easily integrated into the concrete batch control system, saving you the expense of buying and maintaining separate systems.
Optional…( Not include in Price)
1. Electrical Control Panel
2. Temperature monitoring
3. Engineering Services
Batching Plant Control System Price:
$2000
————————————————–
Malik Automation
E-mail: info.malikautomation@gmail.com