10 Years Manufacturer TU-3A01 thermal wax actuator for air conditioner and compressor to Palestine Factory
Short Description:
Product Detail
Product Tags
10 Years Manufacturer TU-3A01 thermal wax actuator for air conditioner and compressor to Palestine Factory Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We offer fantastic strength in high quality and enhancement,merchandising,income and marketing and procedure for 10 Years Manufacturer TU-3A01 thermal wax actuator for air conditioner and compressor to Palestine Factory, The product will supply to all over the world, such as: Mexico , Montpellier , Norway , We welcome you to visit our company and factory. It is also convenient to visit our website. Our sales team will offer you the best service. If you need more information, please feel free to contact us by E-mail or telephone. We are sincerely hope to establish a good long-term business relationship with you through this opportunity, based on equal, mutual benefit from now till the future.
First time power up and test of my Arduino controlled can cooler.
The Cooler Uses 4 Peltier Modules, A custom machined cooling block and A custom water loop to remove the heat.
It has a 4.3″ Touchscreen Interface to select Temp and display Temps of the cooling block, Can, The hot side of the 4 Peltiers and Cooling Progress.
Cools a 330ml can from 19 to 1C in approx 10 minutes (Quicker if the block is already cool).
The cooler draws approx 360W (varies slightly with temperature variations).
This is just a test so there are a few bugs/ glitches in the programming in the video. Most have been fixed since recording.
All the components are mounted on my old Litecoin mining rig, Eventually i want to build the cooler into a PC case To provide better protection to the components and make the unit more portable.
The cooling block will reach Temps approx 30C cooler than room temperature with no thermal insulation around the block.
Thanks For Watching
The window opening system contains a digital temperature controller, opening motor and the inductive sensor for stopping the motor at a right point of rotation.
