2017 Latest Design Thermostatic Wax Series Supply to Mecca
Short Description:
Product Detail
Product Tags
2017 Latest Design Thermostatic Wax Series Supply to Mecca Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility Acid and Alkali |
Mechanical Impurity |
||
|
B100 |
Powder, Slice , Column |
90/100 |
≥10 |
Non. |
Non. |
|
B105 |
Powder, Slice , Column |
95/105 |
≥10 |
Non. |
Non. |
|
B110 |
Powder, Slice , Column |
100/110 |
≥10 |
Non. |
Non. |
|
B115 |
Powder, Slice , Column |
105/115 |
≥10 |
Non. |
Non. |
|
B120 |
Powder, Slice , Column |
110/120 |
≥10 |
Non. |
Non. |
|
B125 |
Powder, Slice , Column |
115/125 |
≥10 |
Non. |
Non. |
|
B130 |
Powder, Slice , Column |
120/130 |
≥10 |
Non. |
Non. |
|
B135 |
Powder, Slice , Column |
125/135 |
≥10 |
Non. |
Non. |
|
B140 |
Powder, Slice , Column |
130/140 |
≥10 |
Non. |
Non. |
|
B145 |
Powder, Slice , Column |
135/145 |
≥10 |
Non. |
Non. |
|
B150 |
Powder, Slice , Column |
140/150 |
≥10 |
Non. |
Non. |
|
B155 |
Powder, Slice , Column |
145/155 |
≥10 |
Non. |
Non. |
|
B160 |
Powder, Slice , Column |
150/160 |
≥10 |
Non. |
Non. |
|
B165 |
Powder, Slice , Column |
155/165 |
≥10 |
Non. |
Non. |
|
B170 |
Powder, Slice , Column |
160/170 |
≥10 |
Non. |
Non. |
|
B175 |
Powder, Slice , Column |
165/175 |
≥10 |
Non. |
Non. |
|
B180 |
Powder, Slice , Column |
170/180 |
≥10 |
Non. |
Non |
Product detail pictures:
Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for 2017 Latest Design Thermostatic Wax Series Supply to Mecca, The product will supply to all over the world, such as: Romania , Jeddah , Amman, Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
If your vehicle is not equipped with Navigation, please see your owner’s manual for information on the automatic climate controls for your vehicle.
This is the panel you’ll use to set the climate controls. System functions will be displayed on the screen. To turn on the climate control system, press the ON-OFF button.
The AUTO mode may be used all year round. To turn it ON, press this button for automatic cooling or dehumidified heating. It will automatically regulate and maintain fan speed, air flow and temperature in the cabin. The AUTO mode can be turned OFF by pressing the DEFROSTER, MODE, A/C, AIR RECIRCULATION, TEMPERATURE CONTROL or FAN SPEED CONTROL buttons. To reactivate, press the AUTO button again.
These are the TEMPERATURE CONTROL buttons. Press the up arrow to increase the temperature, or the down arrow to decrease the temperature in the cabin.
Using the climate control system to heat the cabin when outside temperature is below 32° uses more electricity and affects vehicle range more than when using the heater at a temperature that is above 32°.
To manually control fan speed, press either end of this button. The PLUS icon will increase fan speed, while the MINUS icon will decrease fan speed.
Press the DEFROSTER button to select front and side window defrosting or defogging; an indicator will illuminate. The AC automatically turns ON when you select the defroster mode, to help dehumidify the cabin. Then press the TEMPERATURE CONTROL buttons to set the desired temperature to best meet weather conditions. For windshield deicing, the temperature should be set to maximum heat. Also, using the manual fan control, set the fan speed to high. To turn off the AC to prevent excessive electrical usage press the AC button.
To defrost or defog the rear window and, the outside mirrors, press the REAR WINDOW DEFROSTER button. The indicator light will illuminate. After defrosting, press again to turn OFF. If not turned OFF manually, this feature will automatically turn OFF in 15 minutes.
If you want to change how the AUTO function has set airflow coming through the vents, press the MODE button. Your airflow choices will be displayed on the monitor. Press MODE repeatedly to select from these choices:
• air will flow from center and side vents,
• air will flow from center and side vent and foot outlets,
• air will flow mainly from foot outlets, or
• air will flow from the defroster and foot outlets.
In hot or humid conditions, a visible mist may be seen coming from the vents. This does not indicate a malfunction.
To recirculate air inside your vehicle, press the intake air control button and an indicator light will illuminate. This helps A/C efficiency and helps block outside odors from entering the cabin.
Press the intake air control button to turn OFF the recirculation feature and allow fresh air from outside the cabin to be drawn into your vehicle. Please be aware that if the defroster is ON, the OUTSIDE AIR option will automatically be selected. Allowing outside air into the cabin helps the defogging process.
To set the intake air control to automatic, press the intake air control button and hold. The indicator light will blink twice and the inside/outside air circulation will be automatically controlled.
For manual control of air conditioning, press the A/C button to turn it ON or OFF.
The climate control system can be set to preheat or precool the passenger compartment using timers. The climate control timers operate when connected to a charger to help reduce power consumption from the Lithium-ion battery.
To set the timer press the Zero Emission button, then press the Climate Control Timer key.
Next press either Set Timer 1 or Set Timer 2 and enter the expected departure time. To set the timer for different days of the week press the Assign Days key. Now select the preferred timer setting for each day of the week then press the OK key which will return you to the previous page.
Once the settings are complete press the Save Timer key and a setting confirmation screen will display, if the settings are correct press the Yes key. The timer indicator will illuminate. Use the same procedure to set the other timer if needed.
Press the power switch to the OFF position and then connect the charge connector to the vehicle.
Please see your Owner’s Manual for more information on setting and adjusting climate control timers.
You may also remotely operate your climate control system using an internet enabled smartphone or personal computer. Please go to the “Remote Functions” Chapter or see your Owner’s Manual for more information on this feature.
Press the ON-OFF button to turn the system OFF.
There are temperature sensors that regulate the Automatic climate control settings. Please keep these areas clear of papers and other materials.
https://bit.ly/xkQvb6 LED Shower Head Sprinkler Temperature Sensor 3 Color
https://bit.ly/x2cpz8 Round Copper Temperature Sensor 3 Color LED Shower Head Sprinkler
https://bit.ly/xUoHEN Square Temperature Sensor 3 Color LED Shower Head Sprinkler
https://bit.ly/yvg3KE Round Temperature Sensor 3 Color LED Shower Head Sprinkler
https://bit.ly/xzaN66 Square Copper Temperature Sensor 3 Color LED Shower Head Sprinkler
https://bit.ly/xYCGq1 Romantic 4 Mixed-color LED Shower Head Bathroom Sprinkler
The color’s change remind you the water’s temperature.
Water glows Red when water is Hot (temperature above 39°C).
Water glows Blue when water is Warm (temperature is 32°C – 38°C).
Water glows Green when water is Cold (temperature below 31°C).
The built-in flow regulating valve can control water pressure effectively and improve the service life of motor hugely, as well as save water.
Besides, the filter screen designed inside the flow regulating valve can filter the impurities in water, improve water quality and protect the motor rotor from being damaged.
