2017 New Style TU-1D091 thermal wax actuator for industrial thermostatic water regulations mixing valve to Zambia Manufacturers
Short Description:
Product Detail
Product Tags
2017 New Style TU-1D091 thermal wax actuator for industrial thermostatic water regulations mixing valve to Zambia Manufacturers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We're committed to furnishing easy,time-saving and money-saving one-stop purchasing support of consumer for 2017 New Style TU-1D091 thermal wax actuator for industrial thermostatic water regulations mixing valve to Zambia Manufacturers, The product will supply to all over the world, such as: Slovakia , South Korea , London , we are sincerely hope to establish one good long term business relationship with your esteemed company thought this opportunity, based on equal, mutual beneficial and win win business from now till the future.
I used a fan to control the temperature of a room. When the LM34 temperature sensor gets above a set temperature recorded on the Arduino Duemilanove, it will do two things. One, it will activate the solid state relay and this will turn on the fan from the external power source. Secondly, it will log the time and store it on an internal stack on the micro-conroller. When the fan is turned on this will be signaled by a LED turning on. You will be able to cycle through the last three times the fan was activated by pressing a button connected to the micro-controller and this will be shown on the LCD screen.
This is an update from my original Automatic Temp Controller for UDS Smoker. Additional info:
PID controller: https://www.auberins.com/index.php?main_page=product_info&cPath=1&products_id=83
Thermocouple connectors: https://www.auberins.com/index.php?main_page=product_info&cPath=7_43&products_id=119
K-Type thermocouple sensor: https://www.auberins.com/index.php?main_page=product_info&cPath=20_3&products_id=173
Power switch: scavenged from electronics around house
Power connector: Depends on power source, got this one from Radio Shack
Blower motor connector and jacks – 1/8″ mono headphone, Radio Shack: https://www.radioshack.com/product/index.jsp?productId=2103453
Blower motor plug: https://www.radioshack.com/product/index.jsp?productId=2062452
Power supply: 12V, 1A or higher. I used one I had lying around house. You could use something similar to this: https://www.auberins.com/index.php?main_page=product_info&cPath=7_35&products_id=204
Contact me if you have questions.
