8 Year Exporter TU-1D02 thermal wax actuator for air conditioner and compressor for Chile Manufacturer
Short Description:
Product Detail
Product Tags
8 Year Exporter TU-1D02 thermal wax actuator for air conditioner and compressor for Chile Manufacturer Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We're commitment to offer you the competitive price ,remarkable products excellent, also as fast delivery for 8 Year Exporter TU-1D02 thermal wax actuator for air conditioner and compressor for Chile Manufacturer, The product will supply to all over the world, such as: Rome , Ghana , British , we are fully determined to control the whole supply chain so as to provide quality products at competitive price in a timely manner. We are keeping up with the advanced techniques, growing through creating more values for our clients and society.
https://www.etrailer.com/.html
Today on our boat trailer, we'll be installing the Titan zinc-plated leverlock brake actuator, part number t47154007k. To begin our install we'll first need to remove the old or manufacturer's actuator and tongue. To do this, we'll first remove the brake line from the back of the master cylinder. Once we remove the brake line we can then remove the two fasteners that secure it to the frame of our trailer. Take the nut and split lock washer off, both fasteners and then remove the bolts. With the bolts removed we can go ahead and take the actuator off and set it aside. We'll take the new Titan actuator, set it on to the frame and re-install the bolts. Once we have them installed and finger-tight, we'll go ahead and tighten them down. We have the new tongue and actuator installed.
Note: Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
I couldn’t find any good tutorials on this so after I got it working I wanted to show what I did, because this is the cheapest way to add a digital controller to a kiln.
https://www.scribd.com/doc/58112560/New-2006-Power
