8 Years Manufacturer TU-1F93 thermal wax actuator for thermostatic automatic water drain valve for Sweden Factory
Short Description:
Product Detail
Product Tags
8 Years Manufacturer TU-1F93 thermal wax actuator for thermostatic automatic water drain valve for Sweden Factory Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We not only will try our greatest to supply outstanding services to every shopper, but also are ready to receive any suggestion offered by our buyers for 8 Years Manufacturer TU-1F93 thermal wax actuator for thermostatic automatic water drain valve for Sweden Factory, The product will supply to all over the world, such as: Istanbul , US , Sweden , We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
“For information please visit https://owners.nissanusa.com/nowners/. You will find quick reference guides and other useful information about your warranty, Bluetooth® system, and much more!
Your vehicle is equipped with a unique Integrated Control System (I-CON), exclusive to this vehicle, which allows you to change driving characteristics based on road conditions and your driving style, as well as monitor various vehicle electronic systems. Vehicle information is displayed in a monitor located here, on the center console. Vehicle functions are viewed on a series of screens. To access the various screens and adjust settings, you will use these command buttons and the dial to the right of the display.
With the ignition ON, press the DRIVE MODE button to activate all of the drive mode command buttons. If you press the CLIMATE button, the command button icons and functions will change to climate controls. Press the DRIVE MODE button again to change the command buttons back to Drive Mode.
With the Drive Mode System activated, you can use the command buttons to the left of the screen to select one of the following drive modes: Normal, Sport or ECO.
The “Normal” drive mode is best suited for regular, everyday driving. In “Sport” mode, the throttle response, CVT and steering points will adjust to enhance performance and the fuel economy may be reduced. In “ECO” mode, the engine and CVT, if so equipped, will adjust to enhance fuel economy and the accelerating power may be reduced. You can also set the Climate Control System to ECO mode to further enhance fuel economy.
The temperature can still be adjusted with the left hand knob while in drive mode.
When you press any of the drive mode buttons, a screen will appear with a list of four different systems in your vehicle and their status, including: Engine, Continuously Variable Transmission (CVT) (if so equipped), Steering and Climate. The status of each system will vary according to the drive mode selected. In addition to the status list, each drive mode will display a gauge screen, providing further information to help the driver monitor driving performance. The “Normal” drive mode for example, will display a Torque gauge and a voltage meter, while the “Sport” mode displays a Boost gauge and the “ECO” mode provides a gauge that measures the ECO Level.
Press the SETUP button while in any drive mode to display a list of vehicle electronic systems you can monitor and adjust, including Display Brightness, Button Brightness, Select Language, Select Units, Clock Time Setting, Climate ECO, Automatic Interior Illumination, Selective Door Unlock and Automatic Headlight
Sensitivity, if so equipped. Use the dial to the right of the display to highlight items on the list and press ENTER in the center of the dial to select an item. When an item is selected, use the dial to adjust the feature to the preferred setting, then press ENTER to set and exit.
Press the DRIVE INFO button to display this screen, on which you will find the elapsed time, average speed and trip distance since the last reset. To reset all three features at once, press ENTER for more than one second. Press DRIVE INFO a second time to access the G-Force screen, which displays the Current Acceleration, Deceleration and Cornering G-Force on the vehicle.
The ECO INFO button allows you to monitor the fuel consumption record and adjust the intervals for tracking fuel consumption. You can set the fuel consumption record to reset on a daily or weekly basis, or every time the vehicle is turned ON. You can also choose to reset the fuel consumption record manually at your convenience. To reset any of the fuel consumption records, press the ENTER button for more than one second.
Please see your Owner’s Manual for important safety information, system limitations and additional operating information.
”
www.polystarco.com
sales@polystarco.com
HNT 65V Plastic Recycling Machine
TANGENTIAL TYPE THREE-IN-ONE PLASTICS RECYCLING PLANT
Increased output feedscrew that efficiently fully melts the plastic
In-line concept of densification and extrusion reduces energy and labor costs by up to 40% compared to traditional multi-stage batch system
High quality of granules
Reduces wear of screw and barrel due to consistent feeding with preheated and densified material
Heavy duty gear box with precision ground pinions and oil cooling to extend operational life
Long L/D ratio screw for outstanding mixing, stable extrusion, and high productivity
It handles various bulky and lightweight plastic materials, such as “Film, fibers, skeletal offcuts, flakes, bottles and lightweight mouldings and can quite happily accept precrushed chips of plastic from heavier mouldings as an alternative feedstock
Applicable waste materials: HDPE, LDPE, LLDPE, PP, ABS, & PS etc
Hot die face pelletizer makes uniform size pellets by the use of 1-4 flexible blades
The pellets are separated from the water by vibrating, perforated, stainless steel chute. The over sized clumps or lumps will be screened off
Finished pellets are then pneumatically conveyed to a storage tank
Water provides high efficiency cooling of the pellets and this is re-circulated
Hydraulic latern-slide types screen changer, fitted with pressure gauge, for non-stop operation
Screen changes are signaled when present pressures are reached
Output : 80 — 120kgs/hr
Power consumption : 50KW
Power required : 60KW
Conveyer unit :
Feeding band : 2600 x 330mm
Driving motor : 1/4HP x 6P
Shredding drum
Driving motor : 30HP x 4P
Cooling blower : 1/4HP x 1 set, with water cooling device
Extruder unit :
Screw dia : 65mm L/D : 28/1
Barrel cooling : 1/4HP x 2 sets with 2 zones
Main motor : 40HP AC + inverter control
Gear box : FC25, with cooler x 1 set
Screen changer : Hydraulic- latern-slide type, with power pack, non-stop operation.
Includes “Dynisco” pressure gauge x 1 set
Die : x 2 sets, one for PE, one for PP
Die face cutting motor : 1HP x 4P with inverter control
Water jacket : SUS304 stainless steel with 1HP water pump
Vibrating motor : 1/4HP x 4P x 2 sets
Conveying blower : 2HP
Collecting tank : SUS304 stainless steel made at 300kgs volume
Control panel x 1 set includes the followings:
1. Ampere monitoring for automatic feed control
2. Barrel temperature regulation
3. Pressure monitoring with safety cut out
