Big discounting TU-1F04 thermal wax actuator for air conditioner and compressor Export to Kuala Lumpur
Short Description:
Product Detail
Product Tags
Big discounting TU-1F04 thermal wax actuator for air conditioner and compressor Export to Kuala Lumpur Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We retain bettering and perfecting our goods and service. At the same time, we perform actively to do research and enhancement for Big discounting TU-1F04 thermal wax actuator for air conditioner and compressor Export to Kuala Lumpur, The product will supply to all over the world, such as: Netherlands , Hongkong , Angola , The working experience in the field has helped us forged a strong relations with customers and partners both in domestic and international market. For years, our products and solutions have been exported to more than 15 countries in the world and have been widely used by customers.
In this video I show how I control the temperature of the heatsink (the upper heatsink). This is just a prototype.
The peltier modul is between two heatsinks. The bottom is in the water for cooling. For reading the temperature I use BMP180 temperature sensor, which is in the upper heatsink (this is the feedback). The modules is controlled by atmega328 with PID regulator. The output of the PID regualtor is PWM signal connected to H-bridge (I can heat if it is needed).
Two underfloor circuits coming from the manifold was not heating up properly. It was found that the flow rates were not set properly. The floe rates were adjusted and the underfloor heating system was balanced.
