Bottom price for TU-1F93 thermal wax actuator for thermostatic automatic water drain valve to Melbourne Factory
Short Description:
Product Detail
Product Tags
Bottom price for TU-1F93 thermal wax actuator for thermostatic automatic water drain valve to Melbourne Factory Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
To be able to give you benefit and enlarge our business, we also have inspectors in QC Team and assure you our greatest service and products for Bottom price for TU-1F93 thermal wax actuator for thermostatic automatic water drain valve to Melbourne Factory, The product will supply to all over the world, such as: Australia , Costa rica , San Francisco , We welcome you to visit our company and factory. It is also convenient to visit our website. Our sales team will offer you the best service. If you need more information, please feel free to contact us by E-mail or telephone. We are sincerely hope to establish a good long-term business relationship with you through this opportunity, based on equal, mutual benefit from now till the future.
The lift function of my bobcat stopped working. The left joystick was blinking 5 blinks on the left LED, and all the service manual said was to replace the AHC actuator. Once I fixed it, the left joystick was blinking 2 blinks on the left joystick and the service manual said to calibrate actuator, which I did to 1.72V, although I didn’t realize this until I was finished making the video. Note that calibration of the actuator means that the actuator is removed from the machine, disassembled and the potentiometer gear rotated so the output voltage reads 1.72V when the actuator is 0.114″ into the end.
Some pictures and video of fixing a bobcat 863F lift tilt actuator with AHC – advanced hand controls. This bobcat has a metal cased AHC controller. The machines with the plastic case may be different. The video also shows how to replace the spool seal on the lift actuator. Note that I was not able to easily slide the spool out of the back of the hydraulic manifold (it was running into a hard hydraulic line), so I only changed the front seal. The rear seal wasn’t leaking, but I’m sure it will start now that I didn’t change it!
The Bobcat AHC actuator part number is 7104842 for the old style AHC controller.
The globe motor part number located inside the actuator is 403A851
The newer actuator part number is 7101672 which is for use in machines that have a plastic AHC controller housing. That actuator sounds like it’s the same, but when assembled they set the position of the linear actuator to be flush with the end of the actuator instead of inset 0.114″ when the potentiometer voltage reads 1.72V (thanks to Ed for this info).
I see that these two types of actuators are used on a number of models:
751,753,763,773,863,864,873,883,T200,864,
A300 S100 S130 S150 S160 S175 S185 S205
S220 S250 S300 S330 S450 S510 S530 S550
S570 S590 S595 S630 S650 S740 S750 S770
S850 T110 T140 T180 T190 T250 T300 T450 T550 T590 T630 T650 T740 T750 T770 T870
www.polystarco.com
sales@polystarco.com
HNT 65V Plastic Recycling Machine
TANGENTIAL TYPE THREE-IN-ONE PLASTICS RECYCLING PLANT
Increased output feedscrew that efficiently fully melts the plastic
In-line concept of densification and extrusion reduces energy and labor costs by up to 40% compared to traditional multi-stage batch system
High quality of granules
Reduces wear of screw and barrel due to consistent feeding with preheated and densified material
Heavy duty gear box with precision ground pinions and oil cooling to extend operational life
Long L/D ratio screw for outstanding mixing, stable extrusion, and high productivity
It handles various bulky and lightweight plastic materials, such as “Film, fibers, skeletal offcuts, flakes, bottles and lightweight mouldings and can quite happily accept precrushed chips of plastic from heavier mouldings as an alternative feedstock
Applicable waste materials: HDPE, LDPE, LLDPE, PP, ABS, & PS etc
Hot die face pelletizer makes uniform size pellets by the use of 1-4 flexible blades
The pellets are separated from the water by vibrating, perforated, stainless steel chute. The over sized clumps or lumps will be screened off
Finished pellets are then pneumatically conveyed to a storage tank
Water provides high efficiency cooling of the pellets and this is re-circulated
Hydraulic latern-slide types screen changer, fitted with pressure gauge, for non-stop operation
Screen changes are signaled when present pressures are reached
Output : 80 — 120kgs/hr
Power consumption : 50KW
Power required : 60KW
Conveyer unit :
Feeding band : 2600 x 330mm
Driving motor : 1/4HP x 6P
Shredding drum
Driving motor : 30HP x 4P
Cooling blower : 1/4HP x 1 set, with water cooling device
Extruder unit :
Screw dia : 65mm L/D : 28/1
Barrel cooling : 1/4HP x 2 sets with 2 zones
Main motor : 40HP AC + inverter control
Gear box : FC25, with cooler x 1 set
Screen changer : Hydraulic- latern-slide type, with power pack, non-stop operation.
Includes “Dynisco” pressure gauge x 1 set
Die : x 2 sets, one for PE, one for PP
Die face cutting motor : 1HP x 4P with inverter control
Water jacket : SUS304 stainless steel with 1HP water pump
Vibrating motor : 1/4HP x 4P x 2 sets
Conveying blower : 2HP
Collecting tank : SUS304 stainless steel made at 300kgs volume
Control panel x 1 set includes the followings:
1. Ampere monitoring for automatic feed control
2. Barrel temperature regulation
3. Pressure monitoring with safety cut out
