Cheap PriceList for TU-1D01-71 thermal wax actuator for automobile thermostat for Philadelphia Factory
Short Description:
Product Detail
Product Tags
Cheap PriceList for TU-1D01-71 thermal wax actuator for automobile thermostat for Philadelphia Factory Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
With this motto in mind, we've come to be one of quite possibly the most technologically innovative, cost-efficient, and price-competitive manufacturers for Cheap PriceList for TU-1D01-71 thermal wax actuator for automobile thermostat for Philadelphia Factory, The product will supply to all over the world, such as: Congo , Marseille , Israel , If any product meed your demand, please feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality products, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!
I used a fan to control the temperature of a room. When the LM34 temperature sensor gets above a set temperature recorded on the Arduino Duemilanove, it will do two things. One, it will activate the solid state relay and this will turn on the fan from the external power source. Secondly, it will log the time and store it on an internal stack on the micro-conroller. When the fan is turned on this will be signaled by a LED turning on. You will be able to cycle through the last three times the fan was activated by pressing a button connected to the micro-controller and this will be shown on the LCD screen.
This video shows how a pH sensor and temperature sensor can be used in conjunction to monitor the pH levels and temperature of a pool. Once the readings for both sensors have been collected, the pH level and temperature are displayed on an LCD screen.
Given a target pH level, the program will calculate the amount of chemicals needed to either increase or decrease the pH of the pool. Depending on the pools actual dimensions, the calculation to get the appropriate amount of added chemicals to alter pH levels can be adjusted.
Here is a list of parts used:
1. BNC pH Lab Electrode: RB-Phi-145 by Phidgets
2. Practical Maker BNC Sensor Shield (sits on top of Arduino)
3. Baaqii HD44780 1602 LCD DISPLAY MODULE LCM BLUE Backlight 16X2 PIC for Arduino AVR
4. Potentiometer
5. Arduino Uno
