Competitive Price for Thermostatic Wax Linearity Series to Greenland Factories
Short Description:
Product Detail
Product Tags
Competitive Price for Thermostatic Wax Linearity Series to Greenland Factories Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility sAcid and Alkali |
Mechanical Impurity |
||
|
B-5-1 |
Liquid |
-20/-5 |
≥7 |
Non. |
Non. |
|
B0-1 |
Liquid |
-15/0 |
≥7 |
Non. |
Non. |
|
B5-1 |
Liquid |
-10/5 |
≥7 |
Non. |
Non. |
|
B15-1 |
Liquid |
0/15 |
≥7 |
Non. |
Non. |
|
B20-1 |
Semisolid |
5/20 |
≥7 |
Non. |
Non. |
|
B25-1 |
Semisolid |
10/25 |
≥7 |
Non. |
Non. |
|
B30-1 |
Semisolid |
15/30 |
≥7 |
Non. |
Non. |
|
B35-1 |
Semisolid |
20/35 |
≥7 |
Non. |
Non. |
|
B40-1 |
Powder, Slice , Column |
25/40 |
≥7 |
Non. |
Non. |
|
B45-1 |
Powder, Slice , Column |
30/45 |
≥7 |
Non. |
Non. |
|
B50-1 |
Powder, Slice , Column |
35/50 |
≥7 |
Non. |
Non. |
|
B55-1 |
Powder, Slice , Column |
40/55 |
≥7 |
Non. |
Non. |
|
B60-1 |
Powder, Slice , Column |
45/60 |
≥7 |
Non. |
Non. |
|
B65-1 |
Powder, Slice , Column |
50/65 |
≥7 |
Non. |
Non. |
|
B70-1 |
Powder, Slice , Column |
55/70 |
≥7 |
Non. |
Non. |
|
B75-1 |
Powder, Slice , Column |
60/75 |
≥7 |
Non. |
Non. |
|
B80-1 |
Powder, Slice , Column |
65/80 |
≥7 |
Non. |
Non. |
|
B85-1 |
Powder, Slice , Column |
70/85 |
≥7 |
Non. |
Non. |
|
B90-1 |
Powder, Slice , Column |
75/90 |
≥7 |
Non. |
Non. |
|
B95-1 |
Powder, Slice , Column |
80/95 |
≥7 |
Non. |
Non. |
Product detail pictures:
No matter new customer or old customer, We believe in long term and trusted relationship for Competitive Price for Thermostatic Wax Linearity Series to Greenland Factories, The product will supply to all over the world, such as: Oslo , Bandung , America , With the enterprising spirit of" high efficiency, convenience, practicality and innovation", and in line with such serving guidance of "good quality but better price, " and "global credit", we are striving to cooperate with the automobile parts companies all over the world to make a win-win partnership.
Shortening Production Equipment Cycle Time
By adopting a high-speed actuator, you will be able to shorten your production equipment cycle time. This way, your equipment’s production capacity will improve, giving you the two advantages below:
1. Needed production levels can be achieved with less equipment
2. Necessary quantity can be produced in short time
Ample Lineup of High-speed Actuators
IAl’s lineup of high-speed actuators come in four driving systems: ball screw drive, ball screw nut rotating drive, belt drive, and linear motor type.
There are a total of 69 types in 12 series with maximum speed of over 2,000mm/s. you can choose the most suitable one to meet your needs.
2,500mm/s, 3.2G in Triple-sized Rolled Ball Screw Mounted Product
We have added a rolled ball screw to the line up, which is a first in the industry to have triple-sized lead ball screw (lead three times longer than the screw diameter).
Because of this triple-sized ball screw, this actuator is low cost, while at the same time maintaining its superior high speed. It has achieved a maximum speed of 2,500mm/s and maximum acceleration rate of 3.2G.
Compared to traditional models, this is a 2.3 times increase in maximum speed, and 1.5 times increase in stroke length available.
Purchase IAI products online at https://www.cmafh.com
“This video is copyrighted material of Nissan North America, Inc. and should not be copied, edited, or reproduced without the permission of Nissan.
For information please visit https://owners.nissanusa.com/nowners/. You will find quick reference guides and other useful information about your warranty, Bluetooth® system, and much more!
This is one of the available climate control panels for your vehicle. If your vehicle is equipped with a different climate control system, see your Owner’s Manual for additional information.
This is the panel you’ll use to set the climate control system. Press the ON/OFF button to turn the climate controls on or off.
The auto mode may be used all year round. To turn ON, press this button for automatic cooling or dehumidified heating. The indicator light turns ON when the system is activated. Set it to the desired temperature. It will automatically regulate and maintain fan speed, air flow and temperature in the cabin. The auto function can be turned OFF by pressing:
● the DEFROST buttons,
● the AIR FLOW CONTROL/MODE button,
● the AIR RECIRCULATION buttons,
● the A/C button, or
● by manually changing the fan speed.
To reactivate automatic control, press the AUTO button again.
Your vehicle has separate temperature controls for the driver and front seat passenger. The driver’s temperature controls will set the temperature for both the driver and passenger if the DUAL control button is NOT activated. Press the up arrow for warm or the down arrow for cooler air. If you want to adjust the passenger side temperature independently from the driver’s side, press this button marked DUAL. Press the up arrow for warm or the down arrow for cooler air. To switch back to driver control, press the DUAL button again.
If you want to change how the auto function has set airflow coming through the vents, press the MODE button. Your airflow choices will be displayed on the monitor. Press MODE repeatedly to select from these choices:
● air will flow from center and side vents,
● from center, side and foot vents,
● mainly from foot vents, or
● from the defroster and foot vents.
In hot or humid conditions, a visible mist may be seen coming from the vents. This does not indicate a malfunction.
To recirculate air inside your vehicle, press the AIR RECIRCULATION button and an indicator light will illuminate. This helps A/C efficiency and helps block outside odors from entering the cabin. Press again to draw in fresh outside air. Please be aware that if the DEFROSTER switch is ON, the air recirculation feature will not activate.
Allowing outside air to enter the vehicle further improves defogging performance. Press the AUTOMATIC AIR INTAKE CONTROL button to allow the system to automatically control the air recirculation feature.
Press THIS button to control fan speed. When you use these controls, the automatic climate control will turn OFF. To return to automatic climate control, press the AUTO button.
Press the A/C button to turn the air conditioning ON. An indicator light will illuminate. Press again to turn OFF.
To defrost or defog front and side windows, press the FRONT DEFROSTER button. The indicator light will illuminate. Air flow will be directed to the front and side windows. If your vehicle is in dual mode, switching on DEFROST will automatically revert to driver control, so both sides of the windshield will defrost evenly. Adjust the driver’s side temperature controls to a setting that will best meet weather conditions. For windshield deicing, your temperature selector should be set to maximum heat. Also, using the manual fan control, set your fan speed to high. As soon as possible after the windshield is cleared, press the AUTO button to return to auto mode. The system will return to your previous settings.
To defrost or defog the rear window and, if so equipped, the outside mirrors, press the REAR WINDOW DEFROSTER button. The indicator light will illuminate. After defrosting, press again to turn OFF. If not turned OFF manually, the REAR WINDOW DEFROSTER will automatically turn OFF in a period of time.
Press the ON/OFF button, to turn the system OFF.
Please see your Owner’s Manual for important safety information, system limitations and additional operating information.
”
