factory customized TU-1F07 thermal wax actuator for thermostatic automatic water drain valve Supply to Peru
Short Description:
Product Detail
Product Tags
factory customized TU-1F07 thermal wax actuator for thermostatic automatic water drain valve Supply to Peru Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
With our loaded practical experience and thoughtful solutions, we now have been identified for a trusted provider for numerous intercontinental consumers for factory customized TU-1F07 thermal wax actuator for thermostatic automatic water drain valve Supply to Peru, The product will supply to all over the world, such as: Mauritania , Roman , New Delhi , With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
Dynex checkball hydraulic pumps use two check valves in each piston pumping-chamber to direct flow from the inlet side of the pump to the pump outlet port. This pump design operates reliably with a wide range of fluids at high pressures. The positive-seating check valves provide better wear and higher volumetric efficiency, especially with low-viscosity, low-lubricity fluids.
Operating benefits include:
VERTICAL MOUNTING: Unlimited pump orientation provides circuit flexibility.
BI-DIRECTIONAL ROTATION: Constant flow direction regardless of drive shaft rotation.
PRESSURES TO 20,000 PSI: The design provides a high horsepower-to-weight ratio handling higher loads than other pumps.
WIDE RANGE OF FLUIDS: The check valves provide better wear and higher volumetric efficiency with low-lubricity/low-viscosity fluids.
NO LUBRICATING OIL REQUIRED: Only the pumped fluid is required for internal lubrication, eliminating a secondary lubrication circuit and reducing maintenance.
CONTAMINATION TOLERANT: A large flow path into pistons, and output through the outlet check valves, allows contamination to be flushed through the pump.
RESISTANT TO CAVITATION: The outlet checks do not unseat until pumped fluid reaches load pressure, providing reduced decompression shock and resistance to cavitation damage.
SPLIT-FLOW: Multiple outlet pumps simplify multiple-function circuits using only one pump, and provide greater output-flow accuracy than flow dividers for synchronized movement.
To learn more, visit https://www.dynexhydraulics.com
Link to project page: https://www.disneyresearch.com/publication/fluid-soft-actuator/
We present a passive, fluid-based transmission which allows robot arms to achieve fast and graceful motion by removing heavy electric motors from the arms and mounting them to the body instead. This lightweight, low friction transmission is particularly suited for robotic applications that require delicate movements and compliant physical interaction with people. This transmission can also be used passively, without motors, for remote manipulation of objects, or remote puppeting of mechanical characters. The puppeteer receives direct haptic feedback during operation, including the ability to feel surface textures, when the transmission is filled with water rather than air. We also constructed a lightweight version of the transmission that operates under vacuum pressures and connects to robot joints using string tendons; these actuators are made entirely of soft, non-metallic materials.
