Factory directly provide TU-1C07 thermal wax actuator for air conditioner and compressor for Curacao Factories
Short Description:
Product Detail
Product Tags
Factory directly provide TU-1C07 thermal wax actuator for air conditioner and compressor for Curacao Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:

Gaining purchaser gratification is our firm's intention eternally. We will make wonderful endeavours to build new and top-quality merchandise, satisfy your exclusive needs and provide you with pre-sale, on-sale and after-sale products and services for Factory directly provide TU-1C07 thermal wax actuator for air conditioner and compressor for Curacao Factories, The product will supply to all over the world, such as: Los Angeles, Marseille, Pakistan, With nearly 30 years' experience in business, we are confident in superior service, quality and delivery. We warmly welcome customers from all over the world to cooperate with our company for common development.
My 2013 Nissan Versa has had a heat shield come loose and rattle three different occasions. The first two were covered by warranty and both occurred during the first year of me owning it. My warranty was up during that first year, and it has held until about a month ago. The guy at the dealership told me it was between the engine and the transmission. I never worried about it, as it was under warranty at the time. However the heat shield that was doing the rattling was actually about the exhaust pipe on the passenger side of the car towards the rear. It takes a 10mm socket to tighten/loosen the bolts. The heat shield actually broke off from the part that the bolt attached to, so I just loosened the bolt and tucked that part under the second part of the heat shield. I’m sure it’ll come out again, but atleast this’ll stop that annoying rattle. I hope this video may help someone else who has had this problem. Thanks for watching!
Email:yuexiangsampson@outlook.com,Mr Sampson.www.yuexiangenzyme.com,A-YX-8 waste oil refining catalyst This product is a long-acting multifunctional gas-phase catalyst with the structure of strip shape. It is suitable for all kinds of waste oil, waste hydraulic oil, waste lubricating oil, waste oil, acidified oil, animal and vegetable oil, crude oil, wax oil, waste plastic oil and waste tire oil. And other raw materials oil. Is n-paraffin, short-chain, cracking catalyst, can make oil in the reactor in the high-
temperature pyrolysis of the gas-phase catalytic purification , refining high-quality refined oil. The use of the agent has the
following advantages:
1, can significantly reduce the freezing point of refined oil products and cold filter points, can make high waxy components of crude oil, waste diesel, waste oil into low-wax light diesel oil , so that oil to 0 # to -20 #. Can be a good removal of impurities, colloid, hydrogen sulfide, asphaltene, unsaturated hydrocarbons, so that the oil clear and transparent, pure taste.
2, in the refining process is not sticky, do not plug the pipe, slow oxidation, refining process, good temperature control, do not paste kettle, smell small, easy to clean, can be very good protection equipment , To extend the service life of the device.
3, low investment, high efficiency, easy to use, easy to operate, put in a multi-use, long-term benefit, and can be recycled. Each input
can be used for 6 months, 6 months after the catalyst out, after regeneration into the catalytic tower can be used repeatedly.
4, the agent not only reduce the freezing point, to improve the oil rate, the effect of changing oil density, but also in the refining process can also give all kinds of oil decolorization and deodorization.






