factory Outlets for TU-1J04 thermal wax actuator for electric switch valve to Ghana Factories
Short Description:
Product Detail
Product Tags
factory Outlets for TU-1J04 thermal wax actuator for electric switch valve to Ghana Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Fast and great quotations, informed advisers to help you choose the correct solution that suits all your requirements, a short creation time, responsible top quality manage and distinct providers for paying and shipping affairs for factory Outlets for TU-1J04 thermal wax actuator for electric switch valve to Ghana Factories, The product will supply to all over the world, such as: Suriname , Swiss , Benin , We have advanced production technology, and pursuit innovative in products. At the same time, the good service has enhanced the good reputation. We believe that as long as you understand our product, you must be willing to become partners with us. Looking forward to your inquiry.
https://www.mekanizmalar.com/menu_pneumatic.html
Some manufacturing processes require use of large pneumatic cylinders. If the operation cycle of these cylinders are long, such as bonding of laminated materials, use of a single high pressure line is acceptable. However if the operation cycle is short, like an assemble operation, the use of a single air pressure for forward and retract stroke is not acceptable. This is because the air cylinder consumes ALMOST the same amount of pressurized air in retract stroke as the forward stroke. However the power need is confined to forward stroke, and the retract operation does not require significant power at all. To conserve the valuable pressurized air resources, it is advisable to use lower pressure air for retract operation as shown in this animation. Notice that to achieve this a high pressure air coming from pressure tank is divided into two line one of which is fed to the rod end of the air cylinder after passing through a pressure reducer. Also the connection of air lines to a five port four way valve arranged so that it allows two pressure line connection to one air cylinder as shown.
12 mm socket
ratchet
flathead screwdriver
were the tools needed for this job
please subscribe thanks for watching
