Factory selling Energy Storage Wax Series for Swiss Factories
Short Description:
Product Detail
Product Tags
Factory selling Energy Storage Wax Series for Swiss Factories Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
We take the wax’s advantage characteristic which can absorb and release thermal energy in the solid-liquid transformation process to store the transferred energy to achieve making use of the most of rich energy resource. Recently years, the new technique has been researched and developed in many fields all over the world, such as new building material, textile industry, electric power, medical device, aviation and space. Some of projects have already stepped into a practical and commercial stage
To conform to market requirement, we have a very good cooperation with some Chinese famous Universities, Scientific Institutions & enterprises to develop and research in energy storage wax.. Some projects have already stepped into a practical stage
|
Name |
Model |
Melt Point |
Mechanical Impurities (%) |
Water-Solubility Acid and Alkali |
Appearance |
|
Energy Storage Wax |
E20 |
20 |
Non |
Non |
White-Yellowy Liquid |
|
Energy Storage Wax |
E21 |
25 |
Non |
Non |
White-Yellowy Liquid |
|
Energy Storage Wax |
E22 |
30 |
Non |
Non |
White-Yellowy Liquid |
|
Energy Storage Wax |
E23 |
35 |
Non |
Non |
White-Yellowy Liquid |
|
Energy Storage Wax |
E24 |
40 |
Non |
Non |
White-Yellowy Solid |
|
Energy Storage Wax |
E25 |
45 |
Non |
Non |
White-Yellowy Solid |
|
Energy Storage Wax |
E26 |
50 |
Non |
Non |
White-Yellowy Solid |
|
Energy Storage Wax |
E27 |
80 |
Non |
Non |
White |
Product detail pictures:
"Sincerity, Innovation, Rigorousness, and Efficiency" may be the persistent conception of our organization for that long-term to establish jointly with customers for mutual reciprocity and mutual gain for Factory selling Energy Storage Wax Series for Swiss Factories, The product will supply to all over the world, such as: London , Bangladesh , Hanover , Our company absorbs new ideas, strict quality control, a full range of service tracking, and adhere to make high-quality products. Our business aims to "honest and trustworthy, favorable price, customer first", so we won the trust of the majority of customers! If you are interested in our products and services, please do not hesitate to contact us!
Fixes problem where passenger heater vents are stuck at one temperature on a 2011, 2012, 2013, 2014 or 2015 Ford Explorer.
Also fixes problem where growling from behind the dash can be heard for a few seconds each time the vehicle is started, and when the passenger temperature is adjusted.
Video made on a 2013 XLT with dual climate controls.
Right Hand Temperature Blend Door Actuator
AA5Z-19E616-C
YH-1779
DATC (Dual Automatic Temperature Control) systems have the following four actuators attached to the HVAC box under the dash:
1) Defrost/panel/floor mode door actuator (upper driver/left side of HVAC box)
2) Left hand temperature blend door actuator (lower driver/left side of HVAC box)
3) Right hand temperature blend door actuator (lower passenger/right side of HVAC box)
4) Air inlet mode (fresh/recirc) door actuator (far passenger/right side of HVAC box, directly behind glove box)
EMTC (Electronic Manual Temperature Control) systems have all of the same actuators, except there is no right hand temperature blend door actuator (the one shown in this video).
For anyone who is interested, here are the details for adding a glove compartment light to an XLT Explorer:
-Glove Compartment Lamp 8A5Z-14413-A
-Connector WPT314
-Connect one wire to a metal spot on the body (ground)
-Connect the other wire to the yellow/green wire that can be found in the cable that is running up the A-pillar just in front of the driver door (connector C317, pin 10, circuit CLN09, fuse F4). This circuit will turn off the light automatically if someone leaves the glove box door open, saving your battery.
How to do basic troubleshooting with your ATV/UTV winch and contactor.
Para Español: https://www.youtube.com/watch?v=ichewKW2iV4
