Factory supplied TU-1C07 thermal wax actuator for air conditioner and compressor for Indonesia Factories
Short Description:
Product Detail
Product Tags
Factory supplied TU-1C07 thermal wax actuator for air conditioner and compressor for Indonesia Factories Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We have now a hugely efficient team to deal with inquiries from buyers. Our goal is "100% client gratification by our solution high-quality, rate & our team service" and take pleasure in a great popularity among clients. With several factories, we will provide a wide assortment of Factory supplied TU-1C07 thermal wax actuator for air conditioner and compressor for Indonesia Factories, The product will supply to all over the world, such as: Chile , Argentina , Roman , Certainly, competitive price, suitable package and timely delivery will be assured as per customers' demands. We sincerely hope to build business relationship with you on the basis of mutual benefit and profit in the very near future. Warmly welcome to contact us and become our direct cooperators.
2012-2013 Ford F-150 Red FX4 Tailgate & Fender Emblem Set
OEM Genuine Ford Parts
. These are sold as a set only and are not sold individually.
Brand new OEM Genuine Ford Part. Don’t accept immitations! 3 total emblems in this set. Both LH and RH fender emblems and the tailgate emblem is included.
Originally used on the 2012 F-150 FX4 .
2-way automotive tape comes pre-attached from the factory. Also has the two “locating pins” attached on the rear to properly align this emblem and will match up to the two existing holes currently in your tailgate and fender
Broken stop in a tilt actuator caused the back of the chair to flip over. I was able to get the actuator working again but without the stop the chances of running it right out the end were high, so high it happened just after I left. She can’t see it so she has no warning of when it is nearing the end. I made up a bar to replace the actuator and lock it in place but because the company had already been called they were already on their way. They “fixed” it by jamming a much larger actuator from a different chair in place. When I checked up on her later that night it became apparent this wasn’t going to work. First they had hooked the thing up so she had bumped the button jamming the seat upright. Second when the chair tilt was used the two actuators slid along each other ripping the hell out of everything. Third when they jammed this big piston in place they didn’t check for wire clearance and the insulation was already cut through in just a few hours. I took what they had done back apart, replaced it with the bar I made and told her that if anyone says *anything* about it that they were to give me a call and I would explain why I did everything. I figure she was at best two days from cutting those wires and shutting that whole chair down wherever it was. Now I don’t have to worry about he getting stranded.
Your mobility, don’t take it for granted.
