Factory Wholesale PriceList for TU-023 thermostatic cartridge wax sensor for sanitary ware to Sri Lanka Manufacturer
Short Description:
Product Detail
Product Tags
Factory Wholesale PriceList for TU-023 thermostatic cartridge wax sensor for sanitary ware to Sri Lanka Manufacturer Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
To create much more benefit for consumers is our company philosophy; customer growing is our working chase for Factory Wholesale PriceList for TU-023 thermostatic cartridge wax sensor for sanitary ware to Sri Lanka Manufacturer, The product will supply to all over the world, such as: Morocco , Spain , Tajikistan , Till now, the goods list has been updated regularly and attracted clients from around the globe. Detailed facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are going to help you get comprehensive acknowledge about our products and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
“This is the climate control panel for your vehicle.
The AUTO mode may be used all year round. The system automatically regulates and maintains fan speed, airflow and temperature in the cabin. To turn the system ON, press the AUTO button. The indicator light turns ON when the system is activated.
The AUTO function can be turned OFF by either changing the fan speed or by pressing the DEFROSTER, MODE or OFF buttons. To reactivate automatic control, press the AUTO button.
To turn the entire climate control system OFF, press the OFF button.
Your vehicle has separate temperature control knobs for the driver and front seat passenger. The driver’s temperature control will set the temperature for both driver and passenger if the DUAL control is not activated. Turn the driver’s side control knob to the left for cooler air or to the right for warmer air.
If you want to adjust the passenger side temperature independently from the driver’s side, press the DUAL button or turn the passenger’s side temperature control knob. The DUAL control indicator light will illuminate. Turn it to the left for cooler air or to the right for warmer air. The passenger’s side temperature will be displayed on the monitor. To switch back to driver control, press the DUAL button again.
The MODE button provides a choice of airflow outlets. Press repeatedly to cycle through these four choices:
● Air will flow from center and side vents
● Air will flow from center, side and foot outlets
● Air will flow mainly from foot outlets
● Air will flow from the defroster and foot outlets Press the A/C button to turn the air conditioning ON or OFF.
Intake air control is automatically regulated in AUTO mode. Press the intake air control button to manually alternate between recirculating inside air and drawing outside air into the cabin. The indicator light on the active side of the button will illuminate.
The air recirculation mode increases air conditioning efficiency and helps block outside odors from entering the cabin. This mode cannot be used when in Defrost mode because allowing outside air to enter the vehicle improves defogging performance.
To return to automatic control of the air intake mode, press and hold the air intake control button for approximately 2 seconds.
Use the fan speed control buttons to adjust the fan speed. Press the PLUS button to increase fan speed. Press the MINUS button to decrease fan speed. When you
manually change fan speeds, it turns off the automatic climate control mode. To return to automatic climate control, press the AUTO button.
To defrost or defog the front and side windows, press the DEFROSTER button. The indicator light will illuminate. Airflow will be directed to the front and side windows.
In the DEFROST mode, the A/C activates automatically at temperatures above 23 degrees Fahrenheit and the air recirculation mode automatically turns off, allowing outside air to be drawn into the passenger compartment to improve the defogging and deicing performance. For windshield deicing, your temperature selector should be turned to maximum heat and the fan speed set to the high setting.
Press the AUTO button to return to AUTO mode. The system will return to your previous settings.
To defrost or defog the rear window and the outside mirrors, if so equipped, push the REAR WINDOW DEFROSTER switch. The indicator light will illuminate. After defrosting, push to turn OFF. If not turned OFF manually, this feature will automatically deactivate after approximately 15 minutes.
There is a temperature sensor located on top of the dashboard near the windshield that helps regulate the automatic climate control settings. Keep this area clear of papers and other materials.
Please see your Owner’s Manual for important safety information, system limitations and additional operating information.
”
How To video of making a Ranque-Hilsch Vortex Cooling Tube from plastic PVC pipe – Part 1. The details and dimensions of how to build it are on my blog: https://ottobelden.blogspot.com/2009/09/diy-homemade-ranque-hilsch-vortex.html This video explains the parts that I used and how I put them together. Check out my blog for more details and also watch Part 2 of this video. These vortex cooling tubes separate hot and cold air using no moving parts (other than compressed air). You can get really cold air on one end if you play around with it and do it right (get a little lucky!)
