Super Purchasing for TU-1F04 thermal wax actuator for air conditioner and compressor Wholesale to Indonesia
Short Description:
Product Detail
Product Tags
Super Purchasing for TU-1F04 thermal wax actuator for air conditioner and compressor Wholesale to Indonesia Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
The corporation upholds the philosophy of "Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth", will proceed to provide aged and new buyers from home and abroad whole-heatedly for Super Purchasing for TU-1F04 thermal wax actuator for air conditioner and compressor Wholesale to Indonesia, The product will supply to all over the world, such as: Rwanda , Hungary , Zimbabwe , We would very much welcome an opportunity to do business with you and have pleasure in attaching further details of our products. Excellent quality, competitive prices,punctual delivery and dependable service can be guaranteed.
How to disable the AC running all the time when using the defrost or defrost+floor vent positions. This was done in a 2001 Civic, in the later years (2003ish to 2005) the AC light operates a bit differently but the same problem is there and this procedure still applies. This is the procedure for the 2001-2005 Civic, for the 2006 to 2011 Civic check my other video.
1. Turn the fan knob to the ON position.
2. Switch to the FACE ONLY vent mode (or DEFROST mode if returning back to factory settings).
3. Turn the temp knob to the HOT setting.
4. Hold down the RECIRCULATION and A/C buttons simultaneously.
5. While holding those two buttons, turn the ignition switch to the RUN position (you don’t have to start the car).
6. Keep holding them down until the light stops flashing/goes solid, then release them.
