Good Quality Thermostatic Wax Linearity Series to Chile Importers
Short Description:
Product Detail
Product Tags
Good Quality Thermostatic Wax Linearity Series to Chile Importers Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility sAcid and Alkali |
Mechanical Impurity |
||
|
B-5-1 |
Liquid |
-20/-5 |
≥7 |
Non. |
Non. |
|
B0-1 |
Liquid |
-15/0 |
≥7 |
Non. |
Non. |
|
B5-1 |
Liquid |
-10/5 |
≥7 |
Non. |
Non. |
|
B15-1 |
Liquid |
0/15 |
≥7 |
Non. |
Non. |
|
B20-1 |
Semisolid |
5/20 |
≥7 |
Non. |
Non. |
|
B25-1 |
Semisolid |
10/25 |
≥7 |
Non. |
Non. |
|
B30-1 |
Semisolid |
15/30 |
≥7 |
Non. |
Non. |
|
B35-1 |
Semisolid |
20/35 |
≥7 |
Non. |
Non. |
|
B40-1 |
Powder, Slice , Column |
25/40 |
≥7 |
Non. |
Non. |
|
B45-1 |
Powder, Slice , Column |
30/45 |
≥7 |
Non. |
Non. |
|
B50-1 |
Powder, Slice , Column |
35/50 |
≥7 |
Non. |
Non. |
|
B55-1 |
Powder, Slice , Column |
40/55 |
≥7 |
Non. |
Non. |
|
B60-1 |
Powder, Slice , Column |
45/60 |
≥7 |
Non. |
Non. |
|
B65-1 |
Powder, Slice , Column |
50/65 |
≥7 |
Non. |
Non. |
|
B70-1 |
Powder, Slice , Column |
55/70 |
≥7 |
Non. |
Non. |
|
B75-1 |
Powder, Slice , Column |
60/75 |
≥7 |
Non. |
Non. |
|
B80-1 |
Powder, Slice , Column |
65/80 |
≥7 |
Non. |
Non. |
|
B85-1 |
Powder, Slice , Column |
70/85 |
≥7 |
Non. |
Non. |
|
B90-1 |
Powder, Slice , Column |
75/90 |
≥7 |
Non. |
Non. |
|
B95-1 |
Powder, Slice , Column |
80/95 |
≥7 |
Non. |
Non. |
Product detail pictures:
We goal to understand excellent disfigurement from the manufacturing and supply the top support to domestic and abroad clients wholeheartedly for Good Quality Thermostatic Wax Linearity Series to Chile Importers, The product will supply to all over the world, such as: Indonesia , Ukraine , Manchester , At Present, our products have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
Model YX-CB series carbon dioxide mixer automatic C02 beverage drinks blending mixing equipment juice water agitator food packaging industry
Carbonated Drink Mixer is applied for carbonation and proportion mixing of various gas beverages (water, syrup, and CO2), such as lemon and Cola. Carbonated Drink Mixer is the main equipment among the complete equipment of beverage production line (especially the key equipment producing middle-and top-level beverage).
YX-CB series Carbonated Beverage/Drink Mixer
Features of beverage drinks blending mixing machines liquid blender equipment:
Carbonated Drink Mixer , after the adoption of advanced technologies in the chemical industry—static mixer (carbonizer), features large area of gas/liquid mass transfer, small resistance loss, high efficiency, low energy consumption, and simple structure. Carbonated Drink Mixer also adopts the multi-stage centrifugal pump with reliable performance and low noise, guaranteeing the performance of the whole machine.
The mixing proportion is accurate and easy for adjustment. With no need of parts replacement, Syrup water CO2 drink mixer can realize the quick output adjustment and the proportion of syrup and water.
Carbonated Drink Mixer , by use of CO2 reflux deoxidation, not only saves CO2, but also achieves the objective of deoxidation and makes the deoxidation water have better pre-carbonation effects.
Carbonated Drink Mixer is convenient to adjust the gas content. According to the requirements of beverage gas content, the adjustment can be done through proper operation.
Carbonated Drink Mixer has perfect automatic control system, featured by coordinate action, simple structure, continuous production, and high automation.
Working principle and main characteristic
Working principle:
When bottles are sent to the machine by conveyor continuously, they firstly are deliveried to the receiving wheel by air-slide conveyor and then to washing part. The bottle clamps hold the bottles and trun over 180°to wash, then return back to their original position after enough washing and drying. Then, the bottles are sent to the middle thumb wheel 1 and to the filling part to be filled, then moved by middle thumb wheel 2 and reach to capping part to be capped, at the same time, cap trimmer sends caps to the top of the bottles and capper screws caps. At last, bottles are sent to the conveyor chain by the out stirring wheel to next working position.
Main Technological Data of CO2 beverage drinks filling packaging machinery:
Type YX-CB1500
Production Capacity (kg/h) 1000 – 1500
Adjust Proportion of Syrup and Water 1:3 1:10
Gas Qty 1.5-2.5
Cool Water Entry Temperature 0 – 5
Working Pressure (MPa) 0.05
Storage Tank Working Pressure (MPa) 0.2 0.5
Power (KW) 1.5
Dimension (mm) 900 * 700 *2000
Weight (kg) 500
Our Factory since 1992 has been manufacturing the cosmetic&food making and packaging machinery.In these field we have the experience rich enough to solve the questions encountered by our customers from both home and abroad.For more information about various high quality machinery like Model YX-CB series carbon dioxide mixer automatic C02 beverage drinks blending mixing equipment juice water agitator food packaging industry,please email via jackdu999@yahoo.com or browse our website https://penglaichina.com.
Follow us on twitter:https://www.twitter.com/jackdu007
Like us on facebook:https://www.facebook.com/jackdu999
Skype us by :turnanewleaf
Call us via:0086-15811882441
Need help replacing the Motor Control Board (Part wp8183196) in your Whirlpool Washer? Watch this how to video with simple, step-by-step instructions for a successful DIY repair.
Stay safe during your repair! Be sure to check https://www.fix.com/safety/ for proper safety procedures before you begin. Use of this video is at your own risk, without liability to Fix.com.
Fix Part Number: FIX11745069
OEM Part Number: wp8183196
What tools you need for this repair:
#20 Torx screw driver
Small flat blade screw driver
Side cutters
The information in this video is specific to Whirlpool and Kenmore. To find a Motor Control Board specific to your model, visit https://www.fix.com
Not what you’re looking for? For more washing machine repair help click here: https://www.fix.com/parts/appliance/washer/
Where you can buy this part:
https://www.fix.com/parts/washer/whirlpool/fix11745069/motor-control-unit-wp8183196/
Connect With Us!
https://www.facebook.com/fixdotcom
https://www.twitter.com/fixdotcom
https://plus.google.com/+fixdotcom
https://pinterest.com/fixdotcom
Visit our blog: https://www.fix.com/blog/
Don’t forget to comment below and subscribe to our channel!
